KRUNAL D. PATEL

ELECTRICAL ENGINEER WITH *+ YEARS OF EXPERIENCE IN ELECTRICAL MAINTENANCE/PROJECT DEPARTMENT. Contact: +91-814*******/+91-977*******, Email: ad154h@r.postjobfree.com PRESENT DESIGNATION: - From 09-03-2023 to till date. Working as an “Electrical Project Engineer” at PGP Glass Pvt. Ltd. (Employee of Flexi Ventures). PRESENT JOB PROFILE: -

Currently working as, an Electrical Project Engineer.

Load calculation of the plant for Transformer/ DG Sets selection, Cable schedule, Cable tray sizing, HT/LT Panel SLD preparation as specs. required by plants.

Installation, Commissioning & Testing of HT/LT Panels, VFD Panels.

Batch House equipments (Batch mixer, Vibro feeder, Magnetic Vibro feeders, Belt Conveyors, Weight bin/hopper, etc.) installation, testing and commissioning.

Inspect HT/LT Panels, Motor, DG Set, Transformers & cables as per approved QAP and Drawings/Data sheets and raise observation if any. Provide MDCC to manufacturer to dispatch materials to sites.

Prepare BOQ for materials & labour work for projects execution.

Prepare Bar chart for different activities, monitor the schedule throughout the project and ensure all planned activities should be completed on time to match the timeline schedule of project. PREVIOUS DESIGNATION: - From 23-11-2021 to 07-03-2023 (1 Year 3 Months). Worked as an “Electrical Project Engineer” at Saurashtra Enviro Projects Pvt. Ltd., Surat (Detox Group of Companies).

PREVIOUS JOB PROFILE: -

Currently working as, a Design cum QC Engineer cum Execution Engineer.

Preparation of E&I Capex.

Load calculation of the plant for Transformer/ DG Sets selection, Cable schedule, Cable tray sizing, HT/LT Panel SLD preparation (based on tender specs.).

Co-ordinate with process team for Mass balance diagram, understanding P&ID and selection of Instruments.

Arrange approved vendor (as mention in tender) technical offer for HT/LT Panels, Motor, DG Set, Transformers, Instruments, PLC Panels, SCADA & cables as per specification provided in tender, prepare technical comparison, provide technical clearance to procurement team and follow up with procurement team for ordering.

Co-ordinate with vendor for SCADA development as per Operation team requirements.

Review drawings submitted by vendors and get them to be approved by project consultants and provide manufacturing clearance to manufacturer.

Inspect HT/LT Panels, Motor, DG Set, Transformers, PLC Panel & cables as per approved QAP and Drawings/Data sheets and raise observation if any. Provide MDCC to manufacturer to dispatch materials to sites.

Provide Site Support for different MSW & CETP/ETP sites whenever required.

Prepare BOQ for materials & labour work for projects execution.

Calculate the load and max. demand of plant and apply for new/load extension to EB as per max. Demand.

Prepare Bar chart for different activities, monitor the schedule throughout the project and ensure all planned activities should be completed on time to match the timeline schedule of project. PROJECTS: -

12 MLD ZLD cum CETP Up-gradation

Design of Electrical Equipment likes HT Panel, Transformer, PCC Panel, MCC/VFD Panels, DG Sets, Cable Schedule, Cable Tray layout.

Installation and commissioning of HT Panels, Transformers, PCC Panel, MCC Panel, VFD Panel, PLC Panel etc.

Installation of PLC Panel, Loop testing and Co-ordinate with supplier for SCADA development.

Installation of Electrical Equipment in units likes DAF, MGF, ACF, Filter Press, SBR, UF/RO System, MEE System and Boiler Plant.

450 KLD ETP PLANT (Adani Hazira Ports Pvt. Ltd.)

Design of Electrical Equipment likes MCC/VFD Panels, Cable Schedule, Cable Tray layout.

Co-ordinate with process team for Mass balance diagram, understanding P&ID and selection of Instruments.

Installation and commissioning of MCC Panel, VFD Panel, PLC Panel, etc.

Installation of PLC Panel, Loop testing and Co-ordinate with supplier for SCADA development.

Installation of Electrical Equipment in units likes DAF, MGF, ACF, Screw Press, UF/RO System. PREVIOUS DESIGNATION: - From 01-01-2019 to 22-11-2021 (2 Years 11 Months). Worked as an “Electrical Executive” in MAINTENANCE at Creative Enviro Control Pvt. Ltd., Palsana. PREVIOUS JOB PROFILE: -

Maintenance in 60 MLD Common Effluent Treatment Plant (Primary Clarifier, SBR, Pre DAF, Polishing DAF, MBBR, Fiber Disk Filter, Air Blowers, Turbo Blowers, Filterpress, Chemical dosing system, Sump pump, EOT cranes, Mono rail hoist)

Operation and Maintenance in 4 MLD RO Plant (Monitoring of Motorized Valve, Media Sand Filter, Micro Cartridge filter, VFD, Allen Bradley Soft Starter, Siemens S7-200 PLC, Operating WinCC, Electromagnetic Flow Meters, Dosing Pumps)

Transformer, MCC, PCC, DG Maintenance and VFD Installation and Commissioning.

Liaisons with DGVCL (Electricity Board) and Ready BOQ for Electrical Project work. PROJECTS: -

4 MLD RO Plant

Installation and commissioning of Transformers, MCC Panel, VFD Panel, PLC Panel etc.

Installation of PLC Panel, Loop testing and Co-ordinate with supplier for SCADA development.

Installation of Electrical Equipment in units likes MGF/RO System. PREVIOUS DESIGNATION: - From 28-08-2017 to 31-12-2018 (1 year 4 months) Worked as an “Electrical Executive” in MAINTENANCE at Geo-hybrid Industrial Solution Pvt. Ltd., Palsana.

PREVIOUS JOB PROFILE: -

Maintenance in Incineration Plant (Rotary kilin, Spray dryer system with cyclone, Sigma mixer, Shredder plastic crusher machine, EOT cranes)

Maintenance in ETP plant.

Transformer, MCC, PCC, DG Maintenance VFD installation and commissioning.

Various works on SAP (S4 HANA)

PREVIOUS DESIGNATION: - From 12-09-2016 to 26-08-2017. (1 Year) Worked as an “Electrical Engineer” in MAINTENANCE at L & T MHPS Turbine Generators Pvt. Ltd.

(Hofincons Limited a unit of Quess Corp. Limited)

PREVIOUS JOB PROFILE: -

Electronic welding machine maintenance (Fronius make No. TranSteel 5000 & 3000 TranSynergic 3000 & 5000, TransTig 3000)

Hydrolic Man lifter. (11 meter, 3 Ton and Ton capacity)

Aneling Gas furnace, Electrical furnace maintenance and Shot Blasting Machine.

20 Ton Manipulator welding positioner (Hydrolic) Maintenance.

5 Ton and 15 ton capacity welding positioners (Radial) maintenance. Complete Industrial Automation Engineer Training at NCVT (Neo Creative Vision Technologies) Surat Center.

PLC (Allen Bradley SLC-500, Siemens S7-300, Delta DVP series 32 ES, Schneider, ABB, Mitsubishi)

SCADA (Wonder ware Intouch) – Creating new application for various process/Application & Creating alarms, Trends and Communicate with PLC Controller.

Software Knowledge:

SACDA (Wonder ware Intouch V 9.0 & 10.0)

PLC (Allen Bradley RSLogix-500 V 4.0, WPL Soft 2.33, Schneider Twido suite 2.0.16, Siemens Step 7 Micro/win V 4.0 for S7-200, Mitsubishi – GX Developer)

ACADEMIC DETAILS: -

PERSONAL DETAILS: -

Examination

Passed

School / College

Year of Passing

Board / University

Percentage

B.E. Electrical

Patel Institute of

Technology, Bhopal

2016 R.G.P.V. Bhopal 7.12 (C.G.P.A.)

Diploma in

Electrical

Shri K.J.

Polytechnic,

Bharuch

2012

G.T.U.,

Gujarat. India.

6.88

(C.G.P.A.)

NAME KRUNAL DHANSUKHBHAI PATEL

FATHER’S NAME DHANSUKHBHAI MAGANBHAI PATEL

DATE OF BIRTH 3rd NAVEMBER, 1993

GENDER MALE

MARITAL STATUS MARRIED

Passport No. R7257799

PERMANENT ADDRESS 285, NEW STREET, KHAJOD VILLAGE, SACHIN- MAGDALLA HIGHWAY, SURAT. GUJARAT, INDIA.

PIN 395 007

LANGUAGES KNOWN ENGLISH, GUJARATI, HINDI

Declaration: -

I do hereby confirm that the information given in this form is true to the best of my knowledge and belief.

KRUNAL D. PATEL

Contact this candidate