Russell Dozier

Pineview, GA *****

ad13qx@r.postjobfree.com

+1-229-***-****

Authorized to work in the US for any employer

Work Experience

Maintenance

Best Western - Pooler, GA

July 2022 to February 2023

Performed daily maintenance as well as preventative maintenance on all the equipment and accessories to the rooms and help in other departments when needed. Removed trash from the building daily Maitenance Supervisor

RAMADA INN by Wyndham - Savannah, GA

January 2022 to June 2022

Completed a full remodel of the motel. Performed daily maintenance such as fixing water pipes to electrical problems and whatever else came about. Made the schedule for the 4 employees under me and organized their work day. Repaired a c work when was possible Maintenance Technician

Norbord - Cordele, GA

July 2021 to November 2021

Performed PM scheduled maintenance on all equipment. Lot of conveyor experience belt drive and chain drive. Changed out bearings and sprockets as needed. Positioning motors and pumps. Welder/Fitter

MacAljon - Savannah, GA

October 2020 to June 2021

Welded and fabricated columns and beams and various steel structures for different projects using .045 mig welding process

Certified Pipe Welder and Fabricator

Worth Fab - Cordele, GA

March 2019 to April 2020

Working in a Fab Shop fitting and welding large stainless structures for the army corps of engineers. Material from a 1/4 inch plate up to 3/4 inch plate using stainless Mig pulse process to weld out. Also built platforms systems with handrails using dual shield flux core welding. And sometimes we would get contracts to weld heavy wall pipe hydraulic systems. Any where from 2 inch to 10 inch schedule 160 xray quality and tested.

Millwright/Maintenance

Nipper Industrial - Cordele, GA

September 2018 to March 2019

Working for a local contractor. Most of the work is at paper mills and saw mills. A lot of pipe and structural welding building piping systems as well as platforms, stairs, and catwalks. Running new belts on the conveyors. Breaking equipment down as needed. Also done several additions to a Norbord plant structurally and mechanically

Pipe Welder/fitter

Apex Iron Works - Milbank, SD

May 2018 to September 2018

I did sanitary tube welding on process pipe for a milk and cheese plant addition. Anywhere from 2 inch up to 6 and 8 inch. installed 10 vats and did all the plumbing for them. New construction Also done a lot of stainless platforms and catwalks that we fabricated and erected surrounding the equipment Pipefitter

Randall Mechanical - Savannah, GA

January 2018 to May 2018

Georgia power plant McIntosh. Had to fit a lot of stainless pipe down at the intake of the river. Job was part of the savannah river project. Experience in pulling measurement and laying out for the piping system. Welding was tig on small pipe and flux core on larger pipe Also experience with cutting saddles and pipe angles. Was fitting mostly schedule 40 and schedule 80. A lot of 6", 8", 24" and 36" . Even got the chance to fit some 60" pipe. Bolting up valves and expansion joints as well Maintenance Technician

Synergy Solutions - Cordele, GA

May 2017 to January 2018

Working on the maint.crew i built platforms and modified hand rails and equipment as needed. Change motors and pumps. Also done a lot of stainless pipe fitting for wastewater and carbon pipe also. Do a lot of conveyor work building and modifications as well as changing belts Ironworker/Welder

Master Steel - Hardeeville, SC

February 2017 to July 2017

Erecting columns, setting bar joist, connecting beams. Certified welder. Also done bridging, edge angle and decking. Familiar with hammer drill, mag drill, porta band, and various other hand tool. Familiar with working with cranes. Experience setting stairs in multiple story buildings and hand rail work. Also with industrial structures. good with indistrial lifts and fork lifts Ironworker/Welder

Steel Erectors Inc - Savannah, GA

April 2016 to February 2017

As an ironworker for this company we have done several small structures, all of the steel, such as golf cart garages to convenient stores. But the majority of my time I have been working at two different two-story schools.I have experience with setting columns, connecting beams and joist, welding joist and doing bridging. Also x braces and perimeter angle for decking. Experience with hammer drill and anchor bolts. Also with an impact and legume gun. I have my own harness and tools. Pipe Welder/Fabricator

Savanah Global - Pembroke, GA

August 2014 to April 2016

Flux-core and metal-core welding.

Fitting and welding components from blueprints for forestry equipment such as big soil prep plows, v- shears, and rotary rakes

Also reworking and building kelly bars for foundation and drilling equipment Also was lead welder for kelly bar project for approximately a year until work slowed down. Experienced with arc gouger and torch for rework and modifications. A lot pipe fitting on big pipe from 8 in. Up to 20 in. Pipe. Experience with working with hardened metals and preheating procedures. Experience using a brake to form metal into desired shape.

Reference. Travis Stokes. 912-***-****

Maintenance Millwright

Universal Maintenance - Toccoa, GA

October 2013 to August 2014

Responsibilities

i fitted and installed steam lines. Replaced structural steel and installed several pumps coming from the bigger tanks. Did maintenance on pumps. Also worked on conveyors and shakers and de barkers at various mills.changed blades on the chipper routinely. Changed and did maintenance on gear boxes and motors. also pipe fitting work on 1 in. To 6 in. Pipe. Experience using drill press and pipe threading tools Welder/fitter

JAG Industrial and Marine - Fort Worth, TX

July 2013 to October 2013

Reading blueprints to fit and weld tubular structures and towers for different electrical and comunications companies using flux core welding process. Also often using a torch and arc gouger when needed to repair cracked welds.

Maintenance /millwright

griffin lumber co - Cordele, GA

June 2012 to September 2012

Completed weekly maintain.schedule as well as other project from running pipe, welding, and greasing bearings at the saw mill. We also built and installed new air lines and hydraulic lines throughout whole mill with 1 inch pipe threading our own pipe. Also did repairs in boiler rooms and the chain drives that go to the top of the bin that feeds the boiler. Also practiced preventive maintenance. And fabricated and welded a new 25 foot stack to go on top of boiler to replace the one that was rusted beyond repair. Welder

Big Tex Trailors - Cordele, GA

January 2012 to May 2012

Performed Mig welding on an assembly line constructing and welding various types of pull behind trailers Welder/Iron Worker

Blue Scope Construction - Kansas City, KS

December 2010 to December 2011

• Operator Boom Lift -performed daily inspections on machines before operating

• Erection-assembling large steel structures and welding in all positions with 7018 and 6014 certifications in 7018 3g and 4g.

Doing iron work erecting the bar joist and connecting then welding out Millwright/Welder

KBR - Macon, GA

December 2009 to December 2010

Responsibilities

We went around to various mills in the southeast taking down old steel structure and erecting new. We also replaced pumps and gearboxes. Like shut down type work.we worked on conveyor systems and setting up very big machinery. Experience fitting and welding carbon pipe. Welder/Fabricator

Harris Waste Management - Cordele, GA

July 2004 to November 2009

Manufactured recycling equipment like shredders and press boxes. Welded with flux core wire on thick heavy plate. Anywhere from. 1/2 in. thick up to 9 and 10 inch thick plates. Experience with preheating and post heating treatment. Lot of multi pass welding stacking welds on top of each other to make bigger welds. Did a lot of bevel welding also with full penetration welds. Fabricated massive structures up to 15 to 20 tons. 5 years experience with blueprint reading. Able to work unsupervised with prints to assemble different structures for weldment. Experience working with over head cranes, lifting devices and rigging. Also working with air carbon arc gouging as well.

Education

High school diploma

South Georgia Technical College - Cordele, GA

2010 to 2012

Diploma

Wilcox County High School

June 2005

Skills

• Plumbing

• Millwright

• Welding

• Heavy Equipment Operation

• Military

• Assembly

• Boiler

• Maintenance

• Rigging

• MIG welding

• Conveyor installation

• Plasma Cutting Assessments Construction Safety -- Proficient September 2020 Using safe practices while on a construction site Full results: Proficient Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.

• Industrial Maintenance

• Blueprint reading

• Pipe threading

• Wastewater

• Press Brake Machine

• Construction

• Fabrication

• Mechanic Experience

• FCAW

• TIG welding

• Forklift

• Equipment Repair

Certifications and Licenses

Welding Certification

Forklift Certification

Contact this candidate