Quality Assurance Construction

Marcus Parker

**** ** *** **, *********, MS *****

Cell: 601-***-**** Email: *************@*****.***

Summary

I have worked in the trucking industry for a number of years in the 90’s. Then got out and went back to construction. I have recently go back into the trucking industry as of June 2023. I have a class A license with and automatic transmission restriction.

Education

OSHA 30: Construction Industry Outreach Training (IACET CEU=3.0) 12/31/2020

U.S. Army Corps of Engineers

Completed (Construction Quality Management for Contractors #784)

Certificate # NWW-14-17-02319 Issued 07/06/2017 Spokane, WA

Certificate # SWF032100057 Issued 12/16/2020 Fort Polk, LA

NFPA 70E – 4 Hour

Trained 3/23/2017

Beaumont Electrical Joint Apprenticeship and Training Committee, Beaumont, TX

Lamar Institute of Technology 2012

Completed 1 semester: Computer Aided Drafting - Beaumont, TX

Pearl River Community College 1995

2 Year Certificate: HVAC/R - Hattiesburg, MS

Skills & Abilities

OTR Tractor Trailer

Experience

Swift Transportation. June2023 – Present

Mobile, AL

OTR Tractor Trailer Driver.

CrossMark Merchandiser October 2022 to January 2023 Hattiesburg, MS Working in Walmart locations, maintaining their book department, and multiple store wide resets.

IBTS 1099 Contractor. April 2022 to April 2023

Construction Quality Assurance FEMA Inspector Multiple Mobile Home Plant in the United States

Performed quality assurance audits at the manufactured home plant as a FEMA observer. Watching over the construction of MHU homes and recording any deficiencies and notifying the plants QA department and FEMA.

Blendco Inc. February 2022 to April 2022

Electrical & Instrumentation Maintenance Technician

Hattiesburg, MS

Maintain & repair all building, and machinery owned by Blendco Inc.

1099 Loss Control Field Representative December 2021 to Present

South Mississippi Area

Work for multiple insurance companies, and real estate companies performing field audits. Both residential and commercial.

DOT Construction December 2020 to December 2021

Construction Quality Control Manager

Fort Polk, LA

Overseen the renovation of two motor pool job sites on Fort Polk, LA

Quality Integrated Services July 2020 to December 2020

Electrical and Instrumentation Construction Quality Control Inspector

Evanston, WY

Contracted to Spire Energy Storage West, inspecting all electrical and instrumentation on new dew point installation, building extension, and NGL bullet tank installation on natural gas storage facility.

ISC Constructors October 2019 to March 2020

Electrical and Instrumentation Construction Quality Control Inspector

Luling, LA

Inspecting all electrical and instrumentation on a new unit addition at the Bayer Monsanto plant.

Quality Integrated Services September 2018 to October 2019

Electrical and Instrumentation Construction Quality Control Inspector

Watford City, ND

Contracted to Targa Resources, inspecting multiple SCADA installations on compressor stations. Was asked to stay on to inspect multiple compressor station additions and to inspect 2 new compressor station builds.

Wise Men June 2018 to September 2018

Electrical Utility Construction Quality Control Inspector

Houston, TX

Contracted to Center Point Entergy, inspecting utility electrical lines for quality, any code violation, and any OSHA violations at job sights.

IBTS 1099 Contractor October 2017 to April 2018

Construction Quality Assurance FEMA Inspector (Hurricane Harvey)

Burleson, TX Champion Plant 125B

Performed quality assurance audits at this manufactured home plant as a FEMA observer. Watching over the construction of MHU homes and recording any deficiencies and notifying Champions QA department.

Energy Performance Engineering February 2017 to September 2017

Construction Quality Control Inspector

Burbank, WA (contracted to USACE at Ice Harbor Dam)

Performed Quality Assurance Representative duties for USACE on project 16-C-0016-HLD overseen the project watching over general contractor and their sub-contractors during the rebuild of #2 hydro-generator unit. Performed testing and documentation of civil, electrical, and mechanical done on this project. Coordinated all task of job between USACE and general contractor, assured quality work was done on this project.

CBRE January 2017 to February 2017

HVAC Electrical and Controls Tech, Construction Quality Control Inspector

Beaumont, TX (Exxon Mobil Account)

Set up sensitive electronic test tools and equipment. Quickly replaced faulty parts and unit wiring and

retested systems. Aligned and tuned complicated inter-related circuits and electromechanical systems.

Disassembled units repaired broken components and restored them to operating condition. Serviced

electrical, pneumatic, mechanical and microprocessor controls. Maintained and serviced HVAC systems and refrigeration equipment. Analyzed, modified and repaired digital control systems. Performed QC Inspections on all installations and repair of HVAC equipment.

Signature Group December 2015 to December 2016

HVAC Electrical and Controls Tech, E&I, Construction Quality Control Inspector

Port Neches, TX (Exxon Mobil Account)

Set up sensitive electronic test tools and equipment. Quickly replaced faulty parts and unit wiring and

retested systems. Aligned and tuned complicated inter-related circuits and electromechanical systems.

Disassembled units repaired broken components and restored them to operating condition. Serviced

electrical, pneumatic, mechanical and microprocessor controls. Maintained and serviced HVAC systems and refrigeration equipment. Analyzed, modified and repaired digital control systems. Performed QC Inspections on all installations and repair of HVAC equipment.

Custom Metal Fabricators January 2015 to December 2015

HVAC Electrical, Controls Tech Foreman, and Construction Quality Control Inspector

Lake Charles, LA

Troubleshot and repaired HVAC and refrigeration equipment. Serviced electrical, pneumatic, mechanical and microprocessor controls. Analyzed, modified and repaired digital control systems. Examined and repaired variable frequency drives. Replaced electrical motors and HVAC systems up to 480 volts after main disconnect. Performed QC Inspections on all installations and repair of HVAC equipment.

Saybolt Inc. August 2014 to December 2014

Oil, Gas, & Chemical Chief Quality Control Inspector

Nederland, TX

Perform necessary volume measurements, temperature measurements, sampling, calculations,

documentations, and reporting accurate and compete assessments of quantity of product.

SGS North America Inc. September 2013 to August 2014

Oil, Gas, & Chemical Quality Control Inspector

Beaumont, TX

Perform necessary volume measurements, temperature measurements, sampling, calculations,

documentations, and reporting accurate and compete assessments of quantity of product.

NDI LLC June 2013 to August 2013

Satellite TV, Internet Contractor

Joplin, MO

Install and troubleshoot satellite TV systems & satellite internet systems.

Dish Network September 2012 to March 2013

Field Service Specialist

Beaumont, TX

Install and troubleshoot satellite TV systems.

Pro Field Services Inc. March 2011 to April 2011

Vacuum Truck Operator

Hallettsville, TX

I worked out of there Winnie, TX terminal. I drove a tractor and a 130 BBL vacuum trailer, pulling waste off oil and natural gas wells and carried to disposal site.

Deep South Recovery August 2008 to January 2011

Owner/ Operator Automotive &Equipment Recovery Agent

Sour Lake, TX

I was self-employed as an auto & equipment recovery agent I done all daily reports and paperwork.

RIO Marine Services February 2007 to July 2008

Marine Electrician and A/C Foreman, Construction Quality Control

Bridge City, TX

I worked as a service technician Foreman, servicing all electrical, audio and video, and A/C needs

on tugboats, barges, and drilling rigs. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways.

Worked extended hours on weekday and weekend projects. Planned motor starter and control installations using codes and specs. Performed QC Inspections on all installations and repair of Electrical & HVAC equipment

Temple Inland Sawmill October 2006 to January 2007

Maintenance electrician/Instrument Technician Foreman

Buna, TX

Worked as a maintenance tech foreman servicing all electrical and instrument equipment on this

automated sawmill using plc systems. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways.

Updated service record files on equipment drawings and history. Recorded the respective measurements for each project. Worked extended hours on weekday and weekend projects.

Parkers Catfish Shack April 2005 to October 2006

Owner/ Operator

Sour Lake, TX

Was self-employed in the restaurant industry.

M & I Electric Industries August 2004 to April 2005

Electrician/ Instrument Technician

Beaumont, TX

Worked in their construction division on multiple industrial jobs and multiple marine jobs.

Planned motor starter and control installations using codes and specs. Measured devices, including analyzers, amp meters and volt-ohm meters. Tested equipment tools such as oscilloscopes, amp meters and test lamps. Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies. Installed, tested, and modified circuit breakers, controls, fuses, lights, and motors.

Perry Doleac Electrical Services October 2003 to August 2004

Electrical Foreman

Hattiesburg, MS

Worked as an electrical foreman on multiple commercial jobs. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways. Updated service record files on equipment drawings and history.

Worked extended hours on weekday and weekend projects. Maintained and tested fire alarm systems.

Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools

and wire and cable cutters.

Noland Company October 2001 to October 2003

Delivery Driver

Dayton, OH

Worked at their location in Hattiesburg, MS as a delivery driver. Drove tractor/trailer flatbed with 3-wheel rear mounted forklift, 28 ft. box van truck, and 1-ton flatbed truck. Delivered supplies thought south MS.

Ramco Trucking January 2001 to September 2001

Driver/Equipment Operator

Vidor, TX

Maintained operator logs, forms and records in accordance with company policies and DOT regulations. Shaped and built roads using large construction equipment. Operated equipment safely and efficiently always.

Parkers Trucking March 1998 to January 2001

Owner/ Operator OTR Driver

Lumberton, MS

Owned 2 Trucks that was run over the road. Drove one myself. Was leased to multiple co.

Laird Electric Co. Inc January 1998 to February 2000

Electrician / Foreman

Bogue Chitto, MS

Worked at various job site as a commercial electrician Installed, tested and modified circuit

breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways. Worked extended hours on weekday and weekend projects.

Edwards Electric April 1995 to January 1998

Electrician/ Foreman

Philadelphia, MS

Worked multiple casino job sites as an electrician/Foreman. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways. Updated service record files on equipment drawings and history. Worked extended hours on weekday and weekend projects. Maintained and tested fire alarm systems.

Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools

and wire and cable cutters.

BE & K Construction Co November 1993 to February 1995

Electrician

Birmingham, AL.

Worked multiple job sites as an electrician on paper mills, chemical plants. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways. Worked extended hours on weekday and weekend projects. Consistently updated knowledge of safety requirements and policies. Planned motor starter and control installations using codes and specs. Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.

Brown & Root Inc November 1990 to November 1993

Electrician

Houston, TX

Worked as an Electrician at the DuPont plant in Delisle, MS. Installed, tested and modified circuit breakers, controls, fuses, lights and motors. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements. Worked with various types of cableways, conduits and other electrical raceways. Worked extended hours on weekday and weekend projects. Planned motor starter and control installations using codes and specs. Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.

References

Ron Maddox E&I Inspector Targa Resources 661-***-****

Aaron Schuff Civil Engineer USACE 509-***-****

Tim Inouye Q.A.R. USACE 808-***-****

Kurt Benoit General Manager Signature Group 409-***-****

Dale McCown Coordinator SGS 409-***-****

Greg Robin Inspection Coordinator Saybolt 409-***-****

Contact this candidate