Brian M. Guthrie

Brian Guthrie Safety Consulting, Ltd

**** ** ******

Athabasca, AB T9S 1K6

780-***-****

ad0oj1@r.postjobfree.com

March 10, 2023

SUMMARY OF RELATED SKILLS AND QUALIFICATIONS

• Association for Materials Protection & Performance (AMPP), Senior Certified Coatings Inspector, Marine Endorsement (Certification Number N-7628, expires 31 July 2025). o National Association of Corrosion Engineers (NACE), Certified CIP Level 3 coating inspector (Certification Number 7628, 5 May 2020, first certified April 2001 with peer review).

o National Association of Corrosion Engineers (NACE), Marine Coating Inspection Program

(January 2005).

o Society for Protective Coatings (SSPC), C-2 Specifying & Managing Protective Coating Projects (8 – 12 November 2004).

o National Association of Corrosion Engineers (NACE), Ethics for the Corrosion Professional e-Course.

• Appointed Subject Matter Expert for the refurbishment of the piping internals of all the Low Pressure Service Water Systems (five systems) for Bruce Power Nuclear Facility in Tiverton, ON.

• Quality control, ITP compliance hold points and inspections of the pipeline pre-installation preparations, river-span bridges and highway overpasses, marine drydock work, pre-fabrication structural work, all steel structures of an Advanced Light Rapid Transit (ALRT), wastewater treatment facility upgrade, BC Hydro assets through Vancouver and the Fraser Valley, Francis River Bridge near Watson Lake, YT for the Yukon Transportation Government.

• Painting & Decorating trades (Province of British Columbia Ministry of Skills, Training & Labour, Certification Number 0306-PD-95, 28 July 1995).

• Industrial Health & Safety Instructor and Master Trainer of safety training instructors with the International Union of Painters and Allied Trades (IUPAT) at their finishing trades school in Surrey, BC, the BladeRunners Program for the BC government approved ACCESS, and a Safety Training Specialist in the Oil Sands Industry.

Safety Courses taught:

• H2S Awareness

• WHMIS 2015 (GHS Global)

• Transportation of Dangerous Goods (TDG)

• Respiratory Protection Equipment (SCBA/

SABA)/Air Purifying Respirator

• Rigging/Swing Stage

• Ladders/Scaffolding Safety

• Heat Stress

• Electrical Safety

• Hearing Conservation

• Overhead Crane/Rigging Safety

• Lift Truck (Forklift) Safety

• Sliding Telescopic Boom Safety

• Personal Gas Monitor/Gas Monitor

• Field Level Hazard/Risk Assessment (FLHA/

FLRA)

• Lock Out/Tag Out

• Accident Investigation (Basic)

P a g e 2

March 10, 2023

• Site Supervisor Safety

• Elevated Work Platform (OSSA)

• Confined Space Entry/Monitor OSSA)

• Fall Protection (OSSA)

• Fire Watch (OSSA)

• Safety Work Permit (OSSA)

• Industrial Painting Instructor (IUPAT)

WORK EXPERIENCE

Coastal GasLink Pipeline (TC Energy), Burns Lake, BC, 2022-2023

• Contracted in August 2022 as a Quality Assurance: Coating Inspector.

• Tasked with quality control and inspections of the pipeline pre-installation preparations, including:

o girth welds surface preparations and coating application, o Inspection Test Plan (ITP) compliance assurance, o Daily progress reporting.

The Coating Inspector, Hamilton, ON, 2018-2022

• Personally hired in October 2018 as a Coating Inspector.

• Tasked with ITP compliance hold points on numerous regional projects, including: o A number of river-span bridges and highway overpasses for the Province of Ontario, o Marine drydock work for Algoma,

o Wastewater treatment facility upgrade for the City of Barrie, ON, o Pre-fabrication structural work in several regional shops, o Appointed Subject Matter Expert for the refurbishment of the piping internals of all the Low Pressure Service Water Systems for Bruce Power Nuclear Facility. Canadian Natural Resources (CNRL), Fort McMurray, AB, 2016

• Contracted in October 2018 by TrueGrit Ltd, then subsequently by JAMAC Painters Ltd, as a NACE Coating Inspector.

• Responsible for coating inspections on a Thickener Tank (1001). iSafety Training & Staffing, Fort McMurray, AB, 2014-2018

• Contracted in August 2014 as the Lead Safety Trainer.

• Responsible for:

o Safety course development,

o Training and auditing other instructors,

o Teaching safety courses.

Canadian Industrial & Construction Training, Fort McMurray, AB, 2010-2014

• Contracted in September 2010 as a Master Trainer.

• Responsible for:

o Training and auditing other instructors,

P a g e 3

March 10, 2023

o Teaching safety courses.

Canadian Natural Resources, Ltd, Fort McMurray, AB, 2008-2010

• Personally hired in April 2008 as a Safety Training Specialist.

• Responsible for:

o Teaching safety courses,

o Training and auditing other instructors,

o Safety course development.

Yukon Transportation Government (YTG), Watson Lake, YT, 2003

• Contracted for July and August 2003 as a Level 3 NACE Coating Inspector.

• Responsible for all inspections on the Francis River Bridge. BladeRunners Program (Aboriginal Community Career Employment Services Society – ACCESS), Vancouver, BC, 2001-2008

• Contracted in July 2001 as an Industrial Trainer.

• Responsible for:

o Teaching industrial safety awareness courses such as WHMIS, Confined Space Entry/Monitor, Heat Stress, etc.

International Union of Painters and Allied Trades (IUPAT), Surrey, BC, 2001-2005

• Hired in July 2001 as an Industrial Health & Safety Instructor at the IUPAT finishing trades school in Surrey, BC.

• Responsible for:

o Teaching industrial safety awareness and certification courses such as WHMIS, Confined Space Entry/Monitor, Heat Stress, Fall Protection, Lead Abatement, Asbestos Remediation, Swing Stage, Sand Blasting, Painting, etc., o Training other instructors.

Davis Inspection Ltd, Vancouver, BC, 2001-2007

• Contracted in June 2001 as a Level 3 NACE Coating Inspector.

• Responsible for:

o Vancouver Expo Line Advanced Light Rapid Transit (ALRT): inspection of all steel structures at all stages.

o BC Hydro assets through Vancouver and the Fraser Valley. o Other work: Seaspan, Vancouver dry dock, Sumas Fishery Bio-filter (Confined Space) Inspection duties etc.

P a g e 4

March 10, 2023

RELATED EDUCATION AND TRAINING

• Association for Materials Protection & Performance (AMPP), Senior Certified Coatings Inspector, Marine Specialty (Certification Number N-7628, expires 31 July 2025). o National Association of Corrosion Engineers (NACE), Certified Level 3 coating inspector

(Certification Number 7628, with peer endorsement, 5 May 2020). o National Association of Corrosion Engineers (NACE), Marine Coating Inspection Program

(January 2005).

o Society for Protective Coatings (SSPC), C-2 Specifying & Managing Protective Coating Projects (8 – 12 November 2004).

o National Association of Corrosion Engineers (NACE), Ethics for the Corrosion Professional e-Course.

• iSafety Training & Staffing:

o Confined Space Entry/Monitor (Initial) Oil Sands Safety Association (OSSA) Certified Training Program (Certification Number TP CSEM 2019-1253, 20 February 2020 – 20 February 2023).

o Elevated Work Platform (Initial) OSSA Certified Training Program (Certification Number TP EWP 2019-1354, 3 March 2020 – 3 March 2023).

o Fire Watch (Initial) OSSA Certified Training Program (Certification Number TP FW 2019- 589, 5 March 2020 – 5 March 2023).

• BC Forest Safety, Resource Road Driver Knowledge – 2107 (8 August 2022).

• BuildForce Canada (ABCS Safety Training Inc.), Pipeline Construction Safety Training (1 August 2022 – 1 August 2027).

• Worksite Safety Compliance Center Inc.:

o Confined Space Entry/Monitor (Certification Number PQTG0011UD7D1X, 28 January 2023).

o Canadian Red Cross Standard First Aid & CPR/AED Level C (CSA Std. Z1210-17 Intermediate, AB Issued, Certification Number 103418601, 29 July 2022 – 28 July 2025). o Transportation of Dangerous Goods (TDG) by Ground (25 July 2022). o WHMIS 2015 (GHS Global) (29 June 2022).

o Ground Disturbance for Supervisors – 2.0 (11 July 2022).

• University of New Brunswick, Occupational Health & Safety Certificate (June 2017, e-course).

• Alberta Construction Safety Association:

o Construction Safety Training System (CSTS-09, (e Learning) (Certification Number ACSA Student ID ACSA4572307, 5 May 2015).

o National Construction Safety Officer (NCSO) (May 2014).

• International Union of Painters and Allied Trades (IUPAT): o Industrial Painting (14th Annual Instructors’ Educational Seminar) (21 July 2005, Baltimore, Maryland)

o Confined Space Entry & Rescue: 40-Hour Train-the-Trainer (22 April 2003, OIFSC Training Center, Toronto, Canada).

P a g e 5

March 10, 2023

o Supervisor Training Program – Level 1 Train-the-Trainer (18 April 2004, ISCA Training Center, Toronto, Canada).

o Instructors Training Course – Second Year (24 July 2001, Marshall University, Huntington WV).

• Province of British Columbia Ministry of Skills, Training & Labour, Trade of Painting & Decorating

(Certification Number 0306-PD-95, 28 July 1995).

REFERENCES AND CERTIFICATIONS AVAILABLE UPON REQUEST

Contact this candidate