Muhamad Amir Syukri Mohamed - page *
Muhamad Amir Syukri Mohamed
Shah Alam, Selangor, Malaysia
ad0ego@r.postjobfree.com
linkedin.com/in/muhamad-amir-syukri-mohamed-
b62635190
Summary
Experienced in Fire Fighting Installation/Commissioning/Servicing & Troubleshooting for Fire alarm system (Addressable & Conventional), Installation & maintenance of Sprinkler system, Maintenance of Pre-action Sprinkler system, Hose Reel system, Installation & maintenance of Inert-gas system (Brand: FIKE,Siex,Inergen,Argonite), Installation & maintenance of CO2 system, Installation & maintenance of FM-200 system (Brand: FIKE,Siex), Watermist system (Maintenance of Fogtec & Marrioff system), Installation & maintenance of High Sensitivity Smoke Detector (Hssd) system (Brand: Securiton,Cirrus Pro,VESDA). Mostly in Data Center, Genset, Railway, Warehouse and Office building. Experience
Maintenance cum Warehouse Supervisor
Sukiada Engineering Sdn Bhd
Aug 2022 - Present (11 months)
-Monitor refilling work of clean agent at warehouse. ie; FM-200, Novec 1230 and FK5112.
-Super-pressurize work after finish refilling work of clean agent.
-List down the item, material & goods in and out.
-Manage and arrange the items, materials, and goods inside storage of warehouse.
-Liase with various suppliers for purchase the materials and goods.
-Perform the DO,PO,WO.
-Update stock list for materials inside the warehouse monthly basis.
-Installation of Cheetah Xi and SHP Pro Panel.
-Daily arrangement of warehouse work and storage.
Project Engineer
Markjaya Engineering Sdn Bhd
Jun 2022 - Oct 2022 (5 months)
-Involve in TRX Mall for Fire Fighting services. (Sprinkler system, Fire Alarm system)
-In charge as Floor Manager as per posted by Project Director at TRX Mall.
-Monitor work daily for all fire fighting services.
-Provide daily & weekly schedule for Main-con & Sub-con.
-Manage and arrange material on-site both delivery & storage.
-Liased with COW for site installation & obstacle.
-Review and analyze CSD from others services to avoid any obstacle at site installation.
-Liase with other trade services on site installation.
-Sitewalk with consultant and main-con for audit of the on-site installation as per approved drawing.
-Support others colleague on other floor level.
Muhamad Amir Syukri Mohamed - page 2
Service and Maintenance Engineer
LACOR (Asia) Sdn Bhd
May 2021 - Jun 2022 (1 year 2 months)
-Experience in railway for fire fighting system.
-Provide costing and quotation to the end-user.
-Budgetary of the equipment in and out.
-Familiar with BOMBA requirement on both passive and active.
-Familiar with Door Fan Test procedure and performing the test.
-Fabricating Service and Photo Service report required by customer to achieve customer satisfaction & requirement.
-Attend for fault attendant required by customer.
-Provided solution for customer regarding fire fighting system.
-Provided service and maintenance support for customer.
-Provided any technical report & support required by customer. Project Engineer
LACOR (Asia) Sdn. Bhd.
Sep 2019 - May 2021 (1 year 9 months)
- Installation of Fire Suppression System. Brand: FIKE (FM-200) ~ for KVMRT Sungai Buloh - Serdang - Putrajaya Line, Package S202
- Prepare and submit monthly progress and claim
- Prepare and submit Request for Inspection (RFI) for any installation of material and delivery of the goods
- Prepare work plan and monitor progress of work
- Organized and coordinate subcontractor prior of Combined Services Drawing (CSD)
- Analyzed and review the CSD with shop drawing to oversaw incoming obstacles occurs at site
- Liaise with Interface Engineer to resolve any site condition obstacles
- Raise relevant RFI for on site installation and testing such as Insulation test and Pressure Test.
- Attend site inspection with Partner Delivery Project (PDP), Work Package Contractor (WPC)
- Sitewalk with SC & WPC M&E Engineer on resolving obstacle arise.
- Prepare BOMBA drawing based on As-built at site into the drawing.
- Assist consultant on verification at site installation.
- Support others packages on troubleshooting, commissioning, wiring termination on site installation.
- Attend for commissioning and functional test for the energization.
- Provided solution on panel fault for the subcontractor at site.
- Troubleshooting as per fault indicate from SHP Pro Panel Diagnostic LED Code designators. Muhamad Amir Syukri Mohamed - page 3
Project cum Service Engineer
Changkat Ressam Engineering
Aug 2016 - Aug 2019 (3 years 1 month)
-Experienced in Data Center, Genset, Building and Warehouse for fire fighting system.
-Installation, Servicing and Troubleshooting of Fire Alarm System. Brand: (Siemens Senteso/Ceberus)
-Installation and Servicing of Gas System. Brand: SIEX (Inert-gas, Fm-200). Servicing others brand such as (Inergen, Argonite, Chemetron, Hygood)
- Installation and Servicing of CO2 system.
- Installation, configure and servicing High Smoke Sensitivity Detector (HSSD) Brand: Vesda (VLF500 & VLF200)
Brand: SecuriRAS (Securiton ASD 531, 532, 535)
Brand: Cirrus Pro (CP100 & CP200)
- Servicing and testing for Sprinkler and Hose Reel Panel & Pump (Cut In/Cut Off)
- Service and Maintenance for Watermist System. Brand: (Fogtec & Hi-Fog)
- Service and Maintenance for Fire Extinguisher CO2 and ABC
- Manage in planning, management and coordinating of area of work.
- Site supervise and carried out of troubleshooting, testing, and commissioning of equipment at site.
- On-site solving problems / obstacles may arise at site.
-Performed Weekly and Daily report to Project Manager.
-Performed Service report if there any out of scope work urgently before PO come in. Assistant Engineer
Renesas Semiconductor KL Sdn Bhd
Jun 2015 - Sep 2015 (4 months)
Assembly Engineering Department
- Assist Engineer at Production line
- Assist Engineer monitoring defects at Production line
- Monitor daily progress and identify problem at Production line and report to the Engineer
- Attend daily Progress Meeting Control
- Prepare & design new compartment for scrap resin at Production line Technician
PFC Engineering Sdn. Bhd.
Nov 2012 - Feb 2013 (4 months)
Machinist
-Fabricate damage part from the client.
-Monitor all the equipment in good condition
-Identify the machinery damage or breakdown and report the damage and breakdown.
-Maintenance the part.
-Balancing the shaft.
Muhamad Amir Syukri Mohamed - page 4
Education
Universiti Malaysia Perlis
Bachelor's degree, Manufacturing Engineering
2013 - 2016
Universiti Malaysia Perlis
Diploma, Manufacturing Engineering
2010 - 2013
Licenses & Certifications
Graduate Engineer - Board of Engineers Malaysia
G1142795A
Niosh-TM Safety Passport (NTMSP) - NIOSH Certification Sdn Bhd Issued Nov 2021 - Expires Nov 2024
NTMSP027238M
Niosh-Tenaga Safety Passport (NTSP) - NIOSH Certification Sdn Bhd Issued Apr 2022 - Expires Apr 2025
TNB09199602-06
Skills
CNC Programming • Computer Numerical Control (CNC) • Conventional machining • High Smoke Sensitivity Device installation/configure/commissioning • Fire Protection Engineering • Fire Protection Standards • Addressable/Conventional Fire Alarm System • Site management • Basic Electrical Troubleshooting • Microsoft Office
CGPA : 2.72
CGPA : 3.00