JUDY A. NAVARETTE

Address: No. ** Purok *, Nagbacalan, Ramon, Isabela,3319

Contact No.: 095******** / 097********

Email Address: ad03h4@r.postjobfree.com

WORK SUMMARY

Highly skilled HVAC/R Maintenance Technician with twenty five (25) years experience in inspecting, servicing, repairing and installing various types of heating and cooling, centralized, industrial and commercial air conditioning and refrigeration equipment and all types of cooling system.

AREAS OF EXPERTISE

-Equipment Installation - Troubleshooting and Diagnostics

-Electrical and Mechanical Repairs - Preventive Maintenance

-Outstanding Customer Service - Safety and Compliance

-Repair and Troubleshooting Electronic

Board (system)

WORK HISTORY

1)Company : FCF MINERALS, Runruno Gold-Molybdenum Project

Position : Senior HVAC, Ref. & Aircondition, Electrician Technician

Date : June 12, 2017 up to present

Main office : Makati City

Location : Brgy. Runruno, Quezon, Nueva Vizcaya

Tools & equipment handled:

HVAC Tools:

1.Gauge manifold assy. 9. Ratchet 1 set

2.Vacuum pump. 10. Positive & negative screw driver 1 set

3.Acetylene/oxygen torch 11. Adjustable wrench

4.Clamp meter 12. Recovery machine

5.Multi tester (analog) 13. Flaring & swaging tools

6.Digital tester 14. Tube cuter

7.1 set box wrench 15. Diagonal side cutter & long nose and

8.1 set open wrench 16. Other tools for HVAC

Job Description :

Arrange all equipment tools and permit like; Job/Work Order, Job Safety and Environmental Analysis (JSEA), and Working at Heights Permit. Preparing also before starting the site work, most specifically safety goggles, hand gloves, safety shoes, hard hat safety, transmitter radio for communication and daily uniform and harness.

Installation of new split type inverter airconditioning unit;

Repair and troubleshoot electronics board inverter, and replace spare parts if necessary.

PMS quarterly of all units of aircondition, check outlet and electrical control panel of all breaker of ACU;

Repair and troubleshoot ice maker machine, check electronics program, solenoid valve and coil, flow of water and temperature control, check freon gas and amperes for compressor;

Repair and troubleshoot industrial air dry compressor, check the program and lose electrical circuit control panel;

Repair and troubleshoot all equipment in kitchen and mess hall like; boiler heater, bain marie heater, micro oven, conve oven, rice steamer, bakery oven, bakery machine, etc.;

Repair and troubleshoot freezer and chiller cold storage room, and checking temperature gauge;

Repair and troubleshoot upright freezer, chest type freezer, and refrigerator, no froze refrigerator, check amperes, freon gas and check leakage all joining copper tube;

PMS all ceiling fan and electric fan, replace damage;

Repair and troubleshoot all washing laundry machine, check belt motor, alignment door gasket, electrical circuit and programming control board;

General cleaning of all unit, filter, evaporator and condenser using the high pressure water pump;

Maintain the cold temperature inside the building; check the amperes, leakage and repair charging Freon;

Make sure the control panel board has no lose connection wire;

Repair and calibrate spare parts, condenser fan motor, blower fan motor and check the belt motor;

Check the low side and high side pressure switch;

Performs routine and preventive maintenance as needed for the purpose of ensuring the ongoing functioning of HVAC systems;

Repairs heating and airconditioning systems and/or components like pumps, motors, air handlers, fan coils, piping, etc. for the purpose of ensuring a comfortable work environment;

Request equipment and supplies for the purpose of ensuring availability of the necessary installation and/or repair;

Responds to emergency situations during or after hours for the purpose of resolving immediate safety concerns.

2)Company : Mohsen Somaa Restaurant

Position : HVAC Airconditioning & Refrigeration Maintenance Technician

Date : June 20, 2016 to May 21, 2017

Location : Tahlia St., Rawda, Jeddah, Saudi Arabia

Tools & Equipments Handled:

Electronic Tools & Equipment:

1.Extension wire (15 meters) 12. Refrigerant charging scale

2.Portable welding machine 13. Digital C-clamp meter (AC750)

3.Electric drill gun 14. Analog C-clamp meter

4.Electric grinder 15. Anemometer

5.Volt – OHM meter with mega OHM scale 16. Capacitor tester

6.4-Port digital manifold with micron gauge 17. Compressor analyzer

Vortech valves (R134A/R410A) 18. Hydrometers & Psychrometer

7.Industrial HVAC electronics charging meters 19. Infrared thermometer

8.Water leak detector 20. SPK3-IR & Probe Pocket

9.Flash light thermometer

10.Trouble light 21. Testo H2 Humidity Stick

11.Refrigerant leak detector 22. Super heat & subcooling meters

and gauge

Mechanical Tools & Equipment:

1.Tool box 47. Nut driver set – standard & metric

2.Safety glasses 48. Box wrench set

3.Work gloves 49. Open wrench set

4.Oxygen/acetylene torch 50. Master cool (yellow & gray) /refrigerant

5. Nitrogen recovery tank

6. Turbo torch 51. Air compressor motor with accessories

7. Utility knife 52. Pump motor – high pressure water

8. Steel brush 53. Rotary valve vacuum pump motor

9.Standard gauge manifold and hose and accessories

10.C&D Valve CD2056 R-410A adapter 54. Diagonal pliers (150mm)

11.Tape measure 55. Insulated combination pliers (150mm)

12.Caulking gun 56. Insulated nose pliers (150mm)

13.Wire strippers 57. Swivel hand torx set

14.Tin snip left cutter 58. Flat edge screw driver set

15.Couplers 59. Philip screw driver set

16.Hand oil pump 60. Gear & pulley remover

17.Charging cylinder 61. Pro-set pinch-off plier tools

18.Refrigerant tank (3kg-5kg-10kg) 62. Chisel (20mm)

19.Piercing pliers 63.1set of Rochet/offset&straight service wrench

20.Hammer 64. Tube cutter and size model

21.Rubber mallet - BTC-200 black max mini tube cutter

22.Round file (150mm) - BTC-200R black max ratchet tube cutter

23.Flat rough file (200mm) - BTC-400 heavy duty tube cutter

24.Vise grip 65. Pro-set premium 6” to 12” ball valve

25.Bench vise hose extension

26.Small ball peen hammer 66. BFT850K-BM imperial flaring tool kit

27.Vernier caliper 67. Adjustable handle wrenches 8” and 10”

28.Piercing injection valve (R-12 & R-134A) 68. Lever tube bender (universal ratchet)

29.Quick coupler connector adaptor R-410A 69. Tech. set 45 swaging tool kit

30.Wire crimping tools 70. Pro-set tube expander & swaging set

31.Straight snips 71. Pro-set torque wrenches gauge 1 set

32.Impact driver 72. Pro-set universal 6 sided fin comb tools

33.Tongue and groove pliers 73. Tube bender(180” 3in1/90” 3in1/ 4 3in1

34.Allen wrench set – standard & metric 74. Cutter knife and blade

35.Brazing aluminum rod with flux

36.Brazing silver & copper rod with flux

37.Brazing bronze rod with flux

38.Slip joint pliers

39.Pipe wrench (ridgid 3105 offset) 29-67mm

40.Stillson pipe wrench (12” and 24”)

41.Thumbturn pipe wrench 6.5”

42.Chain and strap wrenches

43.Ritchie yellow jacket/service wrench hex

key adapter set

44. PVC cutter

45. Torch welding kit complete with tanks

46. Hack saw and several blades

Job Description :

General cleaning of all unit, filter, evaporator and condenser using the high pressure water pump;

Maintain the cold temperature inside the building; check the amperes, leakage and repair charging freon;

Make sure the control panel board has no lose connection wire;

Repair and calibrate spare parts, condenser fan motor, blower fan motor and check the belt motor;

Check the low side and high side pressure switch;

Performs routine and preventive maintenance as needed for the purpose of ensuring the ongoing functioning of HVAC systems;

Repairs heating and air conditioning systems and/or components (e.g. pumps, motors, air handlers, fan coils, piping, etc.) for the purpose of ensuring a comfortable work environment;

Request equipment and supplies for the purpose of ensuring availability of the necessary installation and/or repair;

Responds to emergency situations during or after hours for the purpose of resolving immediate safety concerns.

3)Company : Cool Expert Electronics, Refrigeration & A/C Repair Services

Position : Technician

Date : August 2009 – June 16, 2016

Location : Bugallon Proper, Ramon, Isabela, Philippines

Tools &Equipments Handled:

1.Work gloves 29. Tin snip left cutter

2.Safety glasses 30. Wire strippers

3.Safety shoes 31. High pressure water pump

4.Oxygen/acetylene torch welding kit 32. Piercing injection valve

complete with tank and hose 33. Trouble light and flash light

5.Tube cutter (small & big) 34. Screw driver set (straight & philips)

6.Flaring tools set 35. Adjustable wrench 8” & 10”

7.Manifold & gauge set with 5 ft. hose 36. Nut driver set (standard & metric)

and lass fitting (high and low side) 37. Swaging tools set

8.Multi-meter VOM with mega OHM scale 38. Vise grip

9.Electronic thermometer 39. Side cutter

10.Electric drill machine 40. Nose pliers

11.Electric grinder machine 41. Diagonal pliers

12.Tape measure 42. Open wrench set

13.Allen key set 43. Flat file

14.Caulking gun 44. Round file

15.Bench vise 45. Half round file

16.C-clamp meter (digital and analog) 46. Pipe wrench

17.Portable welding machine 47. Charging cylinder tank

18.Tube bender 48. Electric iron gun 220V 40 watts

19.Rotary valve/vacuum pump 49. Steel brush

20.Air compressor tank with meter & 50. Ratchet wrench/imperial tools

hose and spray gun (reversible ratchets)

21.Pro-set pinch off pliers tools 51. Utility knife

22.Piercing pliers valve 52. Turbo torch

23.Hand oil pump 53. Recovery refrigerant machine

24.Chisels 54. Hawk saw and several blades

25.Hammer 55. 1 roll 15 meters extension wire

26.Rubber mallet 56. Refrigerant tank (3kg-5kg-10kg)

27.Gear and pulley removers 57. Stillson pipe wrench

28.Refrigerant leak detector 58. Thumb turn pipe wrench

59. Chain and strap wrench

Job Description :

Repair all kinds of cooling system (freezer van, centralized aircondition, freezer, refrigerator, ice cube machine, ice cream machine, split type, package type, window type, water cooler, etc.)

Repair all kinds of electronics (television, DVD player, electric fan, automatic washing machine, etc.)

Repair car aircon and troubleshooting.

4)Company : International Ports Services Co. Ltd.

Position : Aircon/Gantry Crane Technician & Gantry Crane Electrician

Date : July 14, 2006 to December 14, 2008

Location : King Abdul Aziz Port, Dammam, Saudi Arabia

Tools &Equipments Handled: (same as listed in # 1)

Job Description :

Aircon Technician

Maintain and repair of aircon and electrical systems for ship to shore cranes, HSW straddle carrier and rubber tired gantry’s;

Repair container freezer and chiller;

Repair minor trouble like thermostat, relay, overload, expansion bar, heater, blower fan and electrical problem by using VOM tester, clamp ammeter and other tools;

Change oil compressor and charging Freon;

Calibrate and overhauling compressor;

Repair car aircon for company vehicle;

Preparing technical/service report.

Gantry Crane Technician

Responsible to carry out scheduled Preventive Maintenance Services as per Quay Crane service maintenance standard procedure; services for:

a.AC Drive Motors (Hoist, Trolley Traverse, Boom, Gantry Long Travel, Auxiliaries)

b.Master Drives (Siemens AFE drives, Inverter drives)

c.System Controls (Communication Bus Modules, Contractors, Solid State Relays, Sensors, Actuators, Interface Modules, PLC hardware)

d.Auxiliary Controls (Lightings and peripherals, CCTV)

e.Computer Hardware and Software (Siema, Simatic Touch Panel, Central Rack Station CPU, LAN-SICMA Network)

f.Elevator (Motor and controls with Frequency Converter)

g.Spreader (Motor, ASI modules, Bus modules, CAN-Open)

Gantry Crane Electrician

Performs planned preventive maintenance servicing of electrical control generators, motors, auxiliary controls of 8 ship to shore Gantry Cranes (MAN, KRUPP), 2 Railhead Cranes (MITSUI) equipped with Ward Leonard Controller and Thyristor drive converters.

Immediately respond to equipment breakdowns, flexible in responding to unseen circumstances and rectify faults at shortest period of time.

Electronic Technician, Crane Section

Performs preventive maintenance and breakdown troubleshooting of 2 Krupp, 2 Mitsubishi, 2 Liebbherr Quayside Gantry Cranes, equipped with Ward Leonard Controller and thyristor drive converter, 2 Impsa Gantry Cranes, equipped with static drive converter with PLC and Interbus system control, 6 Krupp Yard Cranes equipped with Ward Leonard Controller system and thyristor drive converters.

Carry out jobs allocated of the abovementioned equipments.

Simulate and calibrate electronic controls.

Performs periodic preventive maintenance servicing of these controls as per scheduled task.

Performs periodic load test to ensure safety of the allowed load of 38 tons.

Calibrate overload safety device.

Set standard parameter of controls to meet voltage/current demand of generators and motors within the range of its specification.

5)Company : Gulf Catering Company

Position : Foreman (Cold Storage Room) cum Driver

Date : December 2001 to February 2006

Location : Malaz, Riyadh, Saudi Arabia

Tools &Equipments Handled: (same as listed in # 1)

Job Description :

Maintenance for cold storage room (freezer and chiller unit);

Repair H-VAC unit and troubleshooting panel board;

Calibrating and overhauling compressor; troubleshooting and repair some parts;

Preparing technical/service report.

6)Company : National Irrigation Administration

Position : Building Electrician/H-VAC

Date : June 23, 1997 to November 30, 2000

Location : Cauayan City, Isabela

Tools &Equipments Handled: (same as listed in # 2)

Job Description :

Troubleshooting all kinds of electrical problems in the building;

Calibrating all controls, doing aircon repairs and all kinds of pumps including water pumps of NIA;

Repair and installation of aircondition, refrigerator, freezer and car aircon;

Preparing technical/service report.

7)Company : National Panasonic Matsushita

Position : Supervisor and Field Technician

Date : April 1994 to June 1997

Location : Santiago City, Isabela

Tools &Equipments Handled: (same as listed in # 2)

Job Description :

Repair refrigerator and freezer, water cooler and ice cube machine;

Install all kinds of cooling systems (centralized aircondition, split type, package type and window type);

Preparing daily maintenance report.

TRAININGS AND SEMINARS ATTENDED

1)SCAFFOLD ERECTION (Erect and Dismantle) Nov. 11-15, 2017

TESDA Nueva Vizcaya Provincial Office

Runruno, Quezon, Nueva Vizcaya

2)SHIP TO SHORE CONTAINER CRANES April 24-27, 2007

SIEMENS LIMITED

Dammam, Saudi Arabia

3)Trade Test & Training as Gantry Operator (Ranked as Class B) June 19, 2006

Fil-Trade Technical Consultants Inc. (Trade Test and Training Firm)

Makati City, Philippines

4)NO-FROST REFRIGERATOR “05 SERIES” SERVICE SEMINAR July 12, 2005

Panasonic Philippines – Customer Service Department

Ortigas Ave. Extension, Taytay, Rizal

5)SEMINAR-WORKSHOP ON METERING (VITRON)

METER AND RELAYING Sept. 10-14, 1998

National Power Corporation

Santiago, Isabela

6)SPLIT-TYPE AIRCONDITIONER SEMINAR June 9-10, 1995

(CS/CU-1203KPH)

Matshushita Electric Philippines Coporation

Cabanatuan City, Nueva Ecija, Philippines

7)REFRIGERATION AND AIRCONDITIONING December 17, 1993

Department of Labor and Employment

National Manpower and Youth Council

Tuguegarao, Cagayan, Philippines

CERTIFICATES AND AWARDS

●National Certificate III – RAC SERVICING (PACU/CRE) July 14, 2017

Certificate No. 170***********

●National Certificate II – SCAFFOLD ERECTION Dec. 15, 2017

Certificate No. 170***********

●Certificate of Eligibility – Building Wiring Electrician May 19, 1998

Certificate No. 98-02-02-03-007*

Civil Service Commission – Tuguegarao, Cagayan

●Certificate of Award (3rd Place in Refrigeration And Airconditioning) Sept. 20, 1996

9th Regional Youth Skills Olympics

Aparri School of Arts and Trades, Aparri, Cagayan

Trade Skills Certificate – 3rd Class in Domestic Refrigeration & Dec. 15, 1993

Aircon Mechanic

TESDA (NMYC) Complex – Taguig, Metro Manila

Certificate No. 02-393-1733

Educational Background

Vocational : TESDA (Technical Education and Skills December 1993

Development Authority) NMYC Complex

Course : General Refrigeration, Aircoditioning and Electrical Panel Board

Personal Data

Date of Birth : March 07, 1977

Place of Birth : Angadanan, Isabela

Civil Status : Married

Nationality : Filipino

Height : 5’5”

Weight : 154 lbs.

Gender : Male

Religion : Roman Catholic

JUDY A. NAVARETTE

Applicant

Contact this candidate