To get actively involved in a challenging and rewarding position with opportunities to use my

skills, display initiative and assume responsibility. And also gain knowledge in other areas of work for my continuous career improvement.

A. QA/QC Engineer “Civil, Structural and Architectural Works” ALYSJ JV “Aktor Greece, Larsen & Toubro, Yapi Merkezi, STFA and AL Jaber Engineering. Project: Doha Metro –Gold Line Underground Project “Qatar Integrated Rail Project” November 1, 2014 to Present

DUTIES & RESPONSIBILITIES:

• Inspect both the Temporary and the Permanent Works, including delivered Materials, in order to verify implementation of the method statements, ITPs and Quality Control procedures.

• Reports to Quality Manager on all issues affecting quality control and assurance

• Prepares monthly Quality Status Report

• Witness Inspections and Tests on Site

• Issuance, review and follow-up of Non Conformity Reports

• Management and Follow-Up of Client’s complaints (Non-compliance)

• Closing of NCRs

• Prepares Daily Pouring Monitoring.

• Monitors progress of the works.

• Coordinates with the Site Engineer regarding the comments to be rectified and give proper suggestion for immediate rectification and some problems that needs coordination with the consultant for the proper execution of the particular activity.

• Ensures up to date copy of approved drawings and specifications are available at site during inspection and review if there is any revision.

• Raise Non-conformance Report when a deficiency is found. Recommends corrective and preventive actions. Possible solutions to the problems being encountered at site to the chief engineer and construction manager.

• Inspection of materials used in the construction as per approved Material Approval Request

(MAR), Civil, Structural and Architectural works materials.

• Coordinate Inspection release with the client’s representative.

• Prepares Daily Inspection Report.

• Attend weekly coordination meeting with production and subcontractor.

• Conduct inspection of installation/fabrication in accordance to approved shop drawings.

• Implement proper documentation of every inspection conducted and ensure that all Inspection and Testing Plan (ITP) are properly filed including attached checklist, approved drawings, test results, etc.

• Witness and review testing such as, NDT, pull out test, wet film thickness and dry film thickness for painting, for backfilling such as field density test, plate load test. Inspects road works such as laying, in-situ density, coring Test of asphalt bituminous course from base to wearing.

• Prepare Quality Record Package Listing (QRPL) to be submitted to client’s representative for project hand over.

• Conducting Final Inspection / Punch listing and snag listing prior to project hand over by using SnagRweb.com

• Responsible for documentation and on-site closure of punch list and snag. CAREER GRAPH: 20 years of extensive experience in construction industry specialized in Quality Control and Assurance, Inspection in Metro Railways, Airport, High-rise Buildings, Car Parks, Towers, and Road & Highways construction as gained across projects in Middle East countries and Philippines.

OBJECTIVE:

JONATHAN S. DESIERTO

QA/QC Engineer

Email Address: ad00qt@r.postjobfree.com,

ad00qt@r.postjobfree.com

Mobile Number: +974-********

B. QA/QC Engineer “Civil, Structural and Architectural Works” TAKENAKA CORPORATION

Doha, Qatar Branch

Project: HAMAD INTERNATIONAL AIRPORT CP 19

MARCH 2011 TO October 2014

DUTIES & RESPONSIBILITIES:

• Inspects and monitors progress of construction from civil to architectural works as per inspection test plan, project specification, approved drawings, method statement, site instruction and material submittal.

• Inform site engineers immediately for any comments for further action, any major comments inform to QCM immediately.

• Attend weekly coordination meeting with production and subcontractor.

• Prepare daily report and snagging list of the completed structure for preparation in the finishing stage.

• Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the Senior Quality Assurance Engineer.

• Attend to various testing of materials and workmanship and test all material and works installed pass the standards and specifications.

• Review and approval of Method Statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) as submitted by Contractor and ensure its compliance with all contract requirements. Ensure all Quality Control Records are kept up to date & filed.

• Review and approval of Materials, related to discipline, ensuring compliance with contract requirements and submitted as per approved Project Construction schedule.

• Conduct inspection for structural steel erection, from fabrication to final painting. And submit for Final Structural Fabrication and Field Dossier.

• Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations to Construction Manage.

• Work as a coating inspector ensures that all the procedures indicated in the method statement and the manufacturer instructions on their product literature has been followed.

• Conduct material inspection and prepare reports, insure material submittal approved, No defects, fabrication documents, expiration date of the materials, point of origin of the Materials and as per approved shop drawing. Regular spot checks of material delivered to site, related to discipline, and direct the relevant Inspector/ Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.

• Make sure that CONTRACTOR has submitted the Method Statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) prior to starting the relevant activity. Inspection & Test Plans and other Quality Verification Forms address all necessary information outlined in the project specification or in the Manufacturer recommendations.

C. QA/QC Engineer “Civil, Structural and Architectural Works” OGER ABU DHABI L.L.C.

ABU DHABI U.A.E

Projects.

1. ABU DHABI FINANCIAL CENTER PROJECT

4 TOWERS (TOWER 1 & 2 32 Storey and TOWER 3&4 36 Storey) 2 CARPARK 6 STOREY, 2 LEVEL RETAIL, STOCK EXCHANGE BUILDING AL SOWWAH SQUARE

AL SOWWAH ISLAND, ADU DHABI, U.A.E.

June 2009 to March 2011

2. CHURCHILL TOWERS PROJECT

3B+G+3P+42/56 STOREY COMMERCIAL/OFFICE (42 FLOORS)

& RESIDENTIAL (56 FLOORS) BUILDING

BUSINESS BAY, DUBAI, U.A.E.

September 2008 to May 2009

D) PROJECT ENGINEER

MBB CONSTRUCTION (2001 - 2008)

Pob. Norte, Sta. Maria, Ilocos Sur, Philippines

E) PROJECT COORDINATOR

Two-Storey Residential Building (2000- 2001)

Cong. Eric D. Singson Residence

Country Villa’s Subdivision

Quezon City, Metro Manila, Philippines

F) SITE ENGINEER

First Northway Development & Construction Corporation (1998-2000) Candon City, Ilocos Sur, Philippines

PERSONAL BACKGROUND:

Name : JONATHAN S. DESIERTO

Address : Doha, Qatar

Address (Philippines) : Sitio Padayao, Dirdirig, Burgos, Ilocos Sur, Philippines Contact Number : +974-*******

Passport Number : P5514151A

Email Address : ad00qt@r.postjobfree.com

Sex : Male

Height : 5 ft. & 3 inches

Age : 44 years old

Date of Birth : 07 January 1975

Nationality : Filipino

Dialects : English, Tagalog, Ilocano

Civil Status : Married

EDUCATIONAL BACKGROUND:

College : 1992 -1998

Saint Louis College

San Fernando City, La Union, Philippines

Degree: Bachelor of Science in Civil Engineering

Secondary : 1988-1992

Saint Paul College of Ilocos Sur

Bantay, Ilocos Sur, Philippines

Elementary : 1982-1988

Padayao, Elementary School

Burgos, Ilocos Sur, Philippines

Technical Skills:

A. With Qatar Driving License

B. Computer Literate

1. Microsoft Office Word

2. Microsoft Office Excel

3. Microsoft Office PowerPoint

4. Microsoft Office Picture Manager

5. Internet, ACONEX– online Document and SnagRweb.com

Contact this candidate