Project Engineer

PROFESSIONAL SUMMARY

Project Engineer (BS Engineering & Business) with over 9 years of experience including plant facility process, manufacturing and consulting engineering. Manage and coordinate projects between departments and outside contractors. This has included: plant facility design & layout of piping & equipment; plant layout flow process; HVAC systems; electrical systems & control panels; pumps; filters; and high speed pharmaceutical automation conveyors. Understanding and designing of plant facility ammonia and glycol process systems. Strong AutoCAD skills in 2D & 3D and over 15 years of experience in computer aided drafting. Writing and updating FDA pharmaceutical Standard Operation Procedures (SOPs) manuals for pharmaceutical equipment and AutoCAD drawings.

Possess a Master’s Degree in Architecture from Dong-A University, in Busan, South Korea where I have studied two years of traditional and modern Korean Hanok architecture. Developed two Hanok home design projects and a master thesis “Application of Design Method New Contemporary Hanok (Korean Traditional Housing) for the American Market.” Additional design project was a 5-story modern middle school in Busan South Korea. Experience in commercial and residential architectural design. Experience in Asian Style exterior and interior architectural design. Knowledgeable in International Building Codes and Chicago Building Codes

PROFESSIONAL EXPERIENCE

Pick N Save-Kroger (Mega Mart) Watertown, WI 12/2016-Current

Part-Time, Grocery Stocker/Bagger: Grocery Store

Grocery Stocker, product placement

Understanding of shipping and receiving process

Customer assistance

Golden Industrial Refrigeration, Wales, WI 05/12/2016-12/2016

Contract, Design Engineer: Facility Ammonia & Glycol Refrigeration Design Company

Utilized AutoCAD in designing plant facility Ammonia & Glycol Refrigeration system layouts

Design mechanical equipment components and design section and elevation drawings

Update and redlined P&IDs, chillers, evaporators, compressors, and process tanks drawings

Developed isometric relief drawings and relief calculations spreadsheets

Created IIAR B109 equipment data sheets.

Update and create equipment SOPs and Preventative Maintenance procedures

Create P&IDs for oil pipe production lines in 2D and isometric layout

Full time Student in South Korea studying for a Master’s degree in Architecture. 08/2012-01/2016

Phoenix Solar Panel, LLC., Schaumburg, IL 05/2011-07/2012

Founder and President: Residential Solar Panel Installation Company

Develop a new residential solar panel installation company

Manage and write up purchase orders, quotes, and review solar panel systems to clients

Utilized AutoCAD in designing solar panel system layouts, mechanical components, electrical systems, and create new/modify solar panel system components

Developed building permit drawings for solar panel installation

Purchase equipment and inventories management

Create business website and brochures

Organize trade shows and fairs to promote company business

Contractual Consulting Engineer from 12/2006 – 11/2011 for the following Companies:

Citgo Refinery, Lamont, IL 11/02/2011-11/29/2011

Consultant, Plant Facility Designer: Petroleum Company

Utilized AutoCAD in designing system layouts, mechanical components

Update and redline P&IDs, oil distillation and, process tanks drawings

Create P&IDs for oil pipe production lines in 2D and isometric layout

PharMEDium Services, LLC., Lake Forest, IL 10/2010-03/2011

Consultant, AutoCad Designer: Pharmaceutical Company

Coordinating facility layouts and equipment with plant managers and vendors

Validation of pharmaceutical drug dispensing pumps and equipment for production line

Utilized AutoCAD in designing system layouts, mechanical components, electrical systems, P&IDs, and liquid dispensing machines for automated systems

Create new/modify architectural backgrounds, facility layouts, and equipment

3D Parametric Design and 3D Solid Modeling

Organized drawing list, specifications, and developed drawing setup SOPs manuals

The Engineering Studio Inc., Park Ridge, IL 09/2008-06/2009

Mechanical/Plumbing/Fire Protection Designer: Consulting Engineering Design Firm

Coordinating project drawings for issuance, permit, bids for each discipline

Communicate with managers for updated project status and issuance

Set up drawings with Architectural backgrounds for the different disciplines

Create mechanical, plumbing and fire protection drawings

Create riser diagrams for each discipline

Calculate plumbing loads, fixture units, GPM, and pipe sizes

Calculated mechanical duct works for CFMs air flows

Organized drawing list, specifications, and developed drawing setup SOPs manuals

Environmental System Design Inc., Chicago, IL 12/2006-04/2008

Consultant, Cad Coordinator: Consulting Engineering Design Firm

Coordinating over 20 different projects for issuance

Communicate with project managers for updated project status and issuance

Set up drawings with Architectural backgrounds for the different disciplines

Redlining, plotting drawings in house and out of house

Create 3D Building Models from Architectural Backgrounds

Create 3D piping, electrical, and mechanical equipment in AutoCAD ABS

Organized drawing list, specifications, & update electrical detail drawings

Project Engineer for the following Companies:

Morton Grove Pharmaceuticals Inc., Morton Grove, IL 5/2005-12/2006

Project Engineer: Pharmaceutical Manufacturing Company

Assist Manager of Engineering & Calibration, MGP Training Coordinator with Engineering Services Group training coordination, record retention and training matrix

Supervised outside contractors for installation of tanks, equipment for product lines, and installation of Load Cell Systems

Assist project managers with outside contractors, drawings, tracking equipment and inventories

Manage departments Preventive Maintenance schedules and task boards

Manage and data log spare parts and equipment for the production lines

Writing and updating Standard Operation Procedures (SOPs) that are compliant with FDA regulation

Utilized AutoCAD in designing system layouts, mechanical components, electrical systems, P&IDs, and liquid dispensing machines on automated conveyor systems

Certified to Manage and operate “Calibration Manager” data base software for equipment preventive maintenance schedules

Automed Technology Inc., Vernon Hills, IL 3/2004-12/2004

Project Engineer: Pharmaceutical Automated Machinery Company.

Assist project managers on site by helping manage and build conveyor systems

Tracking inventories, ordering parts, and standardizing drawings

Organized drawing blocks and drawings

Testing and validating machines in the production lines

Utilized AutoCAD in designing high speed conveyor systems and mechanical components

Updated changes in new design changes of parts and assemblies

Implement new ideas and procedures to improve the productivity of automated conveyor system

INTERN EXPERIENCE

Dean Foods Company, Rockford, IL During Summers and Winter breaks 6/1998-4/2001

Engineering Intern/AutoCAD Drafter: Food Manufacturing Company

Utilized AutoCAD systems in P&IDs, schematic ammonia refrigeration, and electrical systems

Updated yearly plant layout diagrams as required and bottle designs using SolidWorks

Studied management positions by interacting with managers

Toured plant processes and automated conveyor assembly lines

EDUCATION

Master’s of Science in Architecture degree

Dong-A University, Busan, South Korea

Sister School of Western Michigan University 3/2014-12/2015

Focus in Traditional and Contemporary Korean (Hanok) Architecture

Bachelor’s of Science degree, Business and Engineering, April 2003

Western Michigan University, Kalamazoo, MI 3/2001-5/2003

Focus in Computer Graphics and Engineering Management

Member of the Korean Student Association (2001-2003)

Southern Illinois University, Carbondale, IL 9/1998-12/2000

Studied Engineering and Business Administration

Member of Alpha Lambda Delta, National Honor Society for freshmen

Vice President of United Asian American Council (1999-2001)

ADDITIONAL SKILLS

AutoCAD 12-2015

ABS 3D Solid Modeling

Map 3 & 4 AutoCAD

3D Rendering

Sketch Up 2014

Architectural Drafting

AutoCAD Building Systems (ABS)

Skilled in creating 2D, 3D Design, isometric, P&ID layout drawings

Experience in Asian Style Exterior & Interior Architectural Design

Knowledgeable in International Building Codes & Chicago Building Codes

Proficient in all Microsoft Office & Office Windows 10 applications

Knowledgeable in industrial plastics, machinery, and polymers

Certified in open water and advanced scuba diving

LANGUAGE SKILLS

Korean Language Institution Program

Keimyung University, Daegu, South Korea 9/2012-1/2014

Taking Korean language courses for preparation for TOPIK exam.

4 years of Korean language (Intermediate Level)

Knowledgeable of the Korean culture (4 Years Lived in Korea)

Tutored Korean students in English

U.S. Citizen & Korean F4 Visa Holder

Contact this candidate