Electrical Engineering Test Cases
Resume:
ANOOP SIMHA BOLLAMPALLI
**********.***********@*****.***
Summary:
An enthusiastic graduate in electrical engineering having around two years of experience in providing services in Network/Electrical related areas and looking for a position on testing to put my abilities and learning skills to best use and make my effective contribution to the organization.
Hands on experience in Test plan creation, Writing and Updating test cases, Logging defects.
Created and maintained RTM for functional specifications, for mapping requirements to Test cases.
Experience in Effective Root Cause Analysis.
Knowledge of Software Development Life Cycle (SDLC).
Experience in working as a quality engineer.
Performed Robustness Testing on Power mode (ACC, OFF, ON, START) scenarios.
Hands on experience on CAN, LIN, AutoCAD, LabVIEW communication tools like CANOE, CANalyzer, MATLAB.
Hands on experience in writing positive test cases and negative test cases.
Experience in calibrating Speedometer, Tachometer, Fuel and Temperature gauges.
Knowledge in testing and verification involving screens and their transition in menus like AM/FM-HD Tuner, CD, AUX, Audio Settings, Feature Volume and other features related to Audio Control Module.
Knowledge in testing navigation features like Map View, Destination Input, Route guidance.
Knowledge in testing connectivity features like Bluetooth, phone, wi-fi, apple car play.
Knowledge on development of the CANOE panels for different cluster modules and testing them.
Experience in handling the electrical test equipment’s like Oscilloscope, Signal generator, Logic Analyzer, power supply, Volt meter, Current meters, Insulation Resistance meter, multimeters.
Education:
Master of Science in Electrical Engineering April 2016 Wright State University Dayton, OH GPA 3.5
Bachelor of Technology in Electrical Engineering May 2014 Jawaharlal Nehru Technological University India GPA 3.765
Certification:
Cisco Certified Network Associate August 15, 2016
CISCO ID: CSCO13057398
Technical Skills:
Network technologies
TCP/IP, WAN/LAN, VLAN, STP, ACL, NAT, HSRP, GLBP, VRRP, VPNs, IPsec, switching, IPv4, load balancers
Routing Protocols
RIPv2, EIGRP, OSPF
Simulation Tools
Packet tracer, GNS3, Xilinx, P-Spice and MATLAB, AUTO CAD, CADENCE, CAN, CANoe, CANalyzer, LabVIEW.
Programming Languages
MATLAB, Verilog, VHDL, Simulink, Embedded C, PSpice.
Operating System
Windows Server 2003/2008, Windows 8/7/XP, LINUX
Work Experience:
Grader (Electrical Engineering) Sept 2015 – Dec 2015
Wright State University
Worked as a grader in the Electrical Engineering department.
Assisted professor in validating the students’ quizzes and assignments.
Electro Pneumatic Contactors Tester
Electric Loco Shed
Involved in Requirement analysis, Test Plan creation, Writing Test cases, Logging the defects, Updating Test cases.
Preparing the functional test cases and functional checklist after analyzing the requirement.
Worked on Instrument Clusters.
Worked on the testing products and verification of the performance.
Developed the CANOE panels for different cluster modules.
Performed the testing on the instrument clusters.
Tested the performance of contactors.
Tested and verified the voltage and current required by using Voltmeter and Ammeter.
Calibrated the Oscilloscope in the electronics laboratory.
Testing the quality of the contactors.
Calculated the efficiency of contacts.
Maintained day to day testing reports.
Improved the percentage of contact between the contactors.
Network Test Engineer Intern
R L Sun Systems July 2016 - Present
Configured and Installed the Cisco routers in LAN/WAN.
Configured routing protocols like RIPv2, EIGRP, OSPF.
Worked on Cisco Layer 2 switches.
Configured and troubleshoot VLAN, VTP and STP.
Worked with the basic communication protocols like TCP/IP.
Managed IP addressing and implemented IP Access Lists.
Tested the functioning of routers and switches.
Verified the routers, switches and various physical layer products before the release.
Verified the routes of different networks by using command lines.
Automation Workshop Experience: ( National Institute of Technology, Warangal )
Writing Test cases, Testing, Reporting and Interacting with the developers for Radio &Navigation.
Performed Black box testing on head unit for checking the functionality of portable devices with the help of Bluetooth, USB and AUX.
Involved in testing the audio features like FM and AM radio.
Implemented validation testing for navigation module.
Written Positive Test Cases, Negative Test Cases
Tested VR for Navigation features such as enter destination, change route, cancel the route.
Academic Projects:
No Load and Full Load test on 3 phase Induction Motor: Studied the effect on the output of a 3-phase induction motor with load and without load. Measured the RPM, Current, Voltage using the instrument cluster consisting of speedometer and tachometer, and a multimeter. Observed the changes in these parameters when adding and deducting the load using Rheostat.
Auto Intensity Control of a Street Light using LED’s based on Time: Designed a street light using LED’s. Installed Micro Controller on PCB to control the intensity of light. Soldered all the components like capacitor, LED’s on Printed Circuit Board. This is related to embedded systems and it is used to control the usage of Electrical energy.
Shockodyn: Used shock absorbers of bike to generate electrical energy. Electrical Energy is produced from the movement of shock absorbers of bicycle. Dynamo is used to generate the electrical energy. Produced energy is stored in the form of charge by using a capacitor.
Enhanced Interior Gateway Routing Protocol Implementation: Designed a network with interior gateway protocol EIGRP. Worked on console and remote configuration of Ethernet/serial interfaces by implementation of EIGRP routing protocol and managed IP addressing. Initiated Telnet sessions and implemented password security.
Trunking Protocol Implementation: Designed and configured a switches with different VLAN’s and implemented STP (Spanning Tree Protocol) for the communication between the different VLAN’s in the switched network.
Project on High performance 4-bit Pipelined Parallel Adder: Using Cadence Virtuoso Editor designed and simulated layout of the High performance 4-bit Pipelined Parallel Adder. This circuit is done by designing the D-flipflops using two phase non-overlapping clock generator, clock tree and 4 bit FA24T using cadence tool set and then calculated the highest clock frequency at which 4 bit pipeline parallel adder can run and produce correct outputs at D-flipflops.
Project on 4-bit Binary Adder with less number of transistors: Using Cadence Virtuoso Editor designed and simulated the layout of the Fast and low power dissipated 4-bit Binary Adder. This is done by using 24 transistors instead of 28 transistors this lead to the low power dissipation and increases the speed of the circuit.
Course Work: Computer Networks, Computer System Organization, FPGA, VLSI Design, VLSI Testing, RF Signal Amplifiers, Embedded Systems, Power Electronics, Electrical Machines, Basic Switching Theory and Lab, Switching Theory and Logic design, MP&MC, Nano Technology, Engineering Drawing.
Contact this candidate