Post Job Free

Resume

Sign in

Drilling Supervisor

Location:
Grapevine, TX
Posted:
April 06, 2017

Contact this candidate

Resume:

Morris Jay Blackburn

Address: **** ******** ********* ***** *****

Tel: 817-***-****

Email: aczore@r.postjobfree.com

Nationality: American

DOB: 21st February 1953

Personal Statement

I have over 34 years experience in the Oil and Gas Industry, with knowledge of Cementing, Sand Control, Stimulation, Tools & Testing, MWD/LWD, Directional Drilling, and Drilling Supervisory positions in many areas of the world. I am experienced with land and offshore operations. As of the last few years, I have been more involved in HPHT narrow margin wells. I was involved them management of drilling a HTHP/MPD, exploration oil well offshore Cameroon. Drilled 12 ” section with no issues. But there was no offset data, only best guess PP and FG by reservoir engineers. We had to routinely do dynamic Formation Pressure and Formation Gradient tests using the MPD to keep a lookout for increasing trend in the Pore Pressure.

When the downturn hit, I did rig assessments for HPHT well control equipment. I began to advise, mentor, and train HPHT drilling techniques for well control procedures in the North Sea with the likes of Gas de France, Nexen, and TAQA. You really learn the HPHT well control skills when you teach them to the drilling crew on the rig floor. I feel now I can be of use as a HPHT DSV in a real sense of the word. As a HPHT DSV in the past, I was really confident with MPD, using it to determine PP and FG. But, I was too busy with normal DSV work, i.e. safety, logistics, work instructions, and meetings to really be involved. I have always been good with using gamma/resistivity/PP trends from my LWD/DD days, but now I can really work with the geologist more closely. I will be able to build confidence in the HPHT well control techniques, i.e. stripping, flow checks, and dummy connections. After all, HPHT is really just the same drilling practices we have always used in large margin wells. You now have to pay serious attention to detail for HPHT. I can be another set of eyes for well flow back trends in my office while attending to DSV normal activities.

Education & Qualifications

University Physician Assistant certificate in Medicine

(Certified in Cardiology and Thoracic Surgery in the State of Texas)

Richland Junior College Associates Degree in Applied Electronics

Skills

IT Proficiency Solid knowledge of Microsoft Office- Including Word, Excel,

and PowerPoint. Trained in DIMS/OpenWells/WellView/IDS.

Driving Full Clean UK & USA Operators Licence

Languages Intermediate speaker of Spanish with good skills in reading and writing.

Work Experience

July 2015 – Jan 2016 Consultant Senior Drilling Supervisor

TAQA North Sea, Aberdeen UK.

I worked in the office from the beginning of planning the HPHT/H2S subsea abandonment with the John Shaw Semi. I went to all the planning/morning meetings in the office and wrote the HPHT section of the Well Abandonment for well control.

I went to the John Shaw to do a well control audit to assess the well control critical equipment for use on the well.

I created five presentations to create a “reassuring confidence” in the drilling team onshore/offshore showing, exactly, how we planned to keep the rig safe. It was decided to use a cleanup package to burn off H2S and condensate safely.

I had direct input offshore on all drilling instructions, morning, and planning conference calls. I coached the drilling team for handling HPHT well control techniques throughout the completion of abandonment, strip drills, well control drills, and communication skills.

December 2014 – July 2015 Consultant Senior HPHT Drilling Supervisor

Salos-Sunesis Ltd, Aberdeen UK.

I was HPHT Drilling Supervisor/Advisor for GDF on Galaxy 2 Jack up coming into the Pore Pressure ramp.

I was a Drilling Supervisor/HPHT advisor on the Blackford Dolphin from DWOP to completion of the well for Nexen.

I was the lead Performance/Strategy coach for the “Back to Basics and Startup Strategy” for the MonArb Assets for Talisman in the North Sea.

August 2014 – December 2014 Consultant Day Drilling Supervisor

Marathon Oil North Sea, Aberdeen UK.

Management of well abandonment/sidetrack and a grassroots well offshore North Sea.

Semi: WilPhoenix

June 2014 – August 2014 Consultant Day Drilling Supervisor

Noble Energy, Equatorial Guinea.

Management of one well abandonment/sidetrack well offshore EG. Very difficult well to kill, lots of communication between annuli. Completed project.

JU: Atwood Aurora

Jan 2014 – June 2014 Consultant Day Drilling Supervisor

Maersk, Aberdeen.

Management of appraisal/development wells offshore Aberdeen.

Semi: WilPhoenix

October 2013 – Jan 2014 Consultant Day Drilling Supervisor

DNO, Dubai.

Management of a single well abandonment/sidetrack offshore Oman. (4% H2S)

JU: Noble David Tinsley

March 2013 – October 2013 Consultant Day Drilling Supervisor

BG India, Mumbai.

Management of drilling six ERD oil wells offshore Bombay from inception. These were quite complex wells as we had to be very efficient to keep the well clean behind the BHA to 20 degs as we had lots of cuttings drilling at higher ROPs. Project completed.

JU: Ensco 54

Nov 2012 – Jan 2013 Consultant Day Drilling Supervisor

Bowleven Plc.

Management of drilling a HTHP/MPD, exploration oil well offshore Cameroon. Drilled 12 ” section with no issues. Just came out for the DM to help train personnel for HPHT using MPD, since I had just spent 8 months utilizing MPD in India. I already had a job BG India as a DS, so I didn’t stay to finish.

JU: Atwood Aurora

May 2012 – Nov 2012 Consultant Drilling Superintendent

Hindustan Oil Exploration Company Ltd. (ENI)

Management of H.O.E.C. Well Intervention with coil tubing on two wells, and drill multilateral, MPD, ERD gas well offshore India on JU over platform. These wells were possible HP gas wells with near/total losses. We used MPD and pumped downhole and down the string with the rigs mud pumps. The hardest part was maintaining BHP when the hole tended to pack-off due partial losses. Well completed on time. The only project for HOEC that year.

JU: Perro Negro 3.

Nov 2011 – May 2012 Consultant Day Drilling Supervisor Providence Resources

Management of Providence Resources Singleton single multilateral ERD well in West Sussex, UK Land. Finished well.

Rig KCAD T49 land rig

July 2011 – Nov 2011 Consultant Night Drilling Supervisor Dubai Petroleum Establishment

Dubai, UAE

Management of Dubai Petroleum projects to well abandonment/sidetracks and new drill multilateral oil wells offshore Dubai with the Noble David Tinsley Jack up. Moved on due to character/safety conflict with management.

March 2011 – July 2011 Consultant Day Drilling Supervisor Perenco Petroleum Ltd.

Douala, Cameroon

Management of Perenco Petroleum BAF project to drill three exploration oil wells offshore Douala with the Pride Cabinda Jack up. Drilling with a tripod system, the first time used with Perenco. Completed project (3 Exploration wells). These well were HP and required careful handling with 8000-10,000 psi PP possible.

December 2010 – Jan 2011 Consultant Day Drilling Supervisor Novatek Petroleum Ltd.

Cairo, Egypt

Management of Novatek Petroleum project to drill an exploration gas well off Port Said with the Scarabeo 4 semi. Worked on the project for Novatek to oversee operator ENI to keep costs and drilling activities under control. Temporary work while waiting on Cameroon work.

October 2010 – Dec 2010 Consultant Day Drilling Supervisor Northern Petroleum Ltd.

Hampshire, England

Management of Northern Petroleum project to drill a deviated oil well on land in Hampshire. Worked on the project from the start with well construction, logistical planning, and rig assessment to completion. Completed Northern Petroleum’s only project that year.

July 2010 – October 2010 Consultant Day Drilling Supervisor EDF Energy Hole House Farm Project

Cheshire, England

Management of EDF Energy Drilling Revolution project at Hole Farm to redrill, workover, or drill new gas storage wells. Rigless completions.

Nov 2008 – March 2009 Consultant Night Drilling Supervisor Apache Corp North Sea

Offshore Aberdeen, Scotland

Management of Apache’s Drilling project offshore Aberdeen in the Forties field to casing drilling, redrill, workovers, re-enter existing wells off a platform. Moved on due to health reasons.

Mar 2007 – April 2008 Consultant Night/Day Drilling Supervisor Addax Petroleum Nigeria Ltd.

Offshore Calabar and Port Harcourt

Management of Addax’s Drilling ERD project offshore Calabra to drill horizontal landing wells off a jackup over a platform. I worked nights and days on a two jackups and nights on the Semi drilling, gravel packing, and completing development wells, and drilling Appraisal wells.

There was a lot of SIMOPS work due to drilling with a jackup over a platform where live wells were flowing.

As of Nov 2007 I worked on the semi Scarabeo 3 offshore Port Harcourt drilling appraisal wells.

Moved on due to health reasons.

Nov 2006– Mar 2007 Consultant Night Drilling Supervisor

Kerr McGee Petroleum Ltd.

Bohia Bay, China

Management of Kerr McGee’s Drilling project to drill horizontal ERD wells off a workover platform.

Starting at ground level performing shakedown reports and actioning equipment modifications changing from workover to drilling mode with Chinese rig crews and all associated equipment. Upgrading everything from logistics to HSE to smooth out the transition. Finished first well and it was a success.

When Anadarko took over, it was decided to suspend this project due to logistical issues and cost. I finished the six-month contract.

Feb 2001- Nov 2006 Staff Senior Deepwater Directional Drilling Supervisor

Baker Hughes MedAfrica INTEQ

Angola, Nigeria, and Mauritania

Assigned to Deepwater clients: Woodside, ExxonMobil, Esso, Total, Agip, and BP. Operation to represent BHI in the role of Lead DD in the Core Team. The primary aim of the Team was to ensure a consistent approach to directional drilling performance improvement throughout Operations.

I was responsible for ensuring all the directional and hole cleaning from jetting conductor to TD was used with the latest RSS technology.

My role involved well design and drilling program reviews, ensuring that lateral learning was transferred effectively and that new rotary steerable technology was implemented in a controlled/staged manner.

I have drilled 17 x (2000m+) wells, from jetting conductors and running two strings of AutoTrak to TD while dragging Quad LWD strings.

Typical well: Jet Conductor, unjay from Drill-ahead tool, turn to desired direction while building to 3-5deg Inc for a gravity toolface with motor assy. Then continue with AutoTrak with Quad combo to well TD.

Deepwater installations worked on: Ensco 5006 (ex Pride North America), Stena Tay (ODN Tay IV), West Navigator (RamRig/ dual derrick), and Jack Ryan.

Jan 2000 – Feb 2001 Staff Directional Drilling Express Engineer

Schlumberger Anadrill D & M

Kingdom of Saudi Arabia

DD/MWD/LWD engineer combined running Directional, Gamma, and Resistivity while Directional Drilling on Arab “D” wells. Product Champion for DD Express.

PowerDrive Product Champion

May 1997 – May 1998 Staff Directional Driller 1

Baker Hughes INTEQ

South of Muscat, Oman

Directional Driller (2nd man) drilling ERD horizontals, S profiles, and J profiles in the south of Oman.

Lead Directional Driller on performance drilling holes.

Dec 1995 – Feb 1997 Staff MWD Engineer

Halliburton Drilling Service

GOM, Louisiana, and Texas, USA

Trained in Louisiana, GOM, and Texas as a MWD Engineer.

Dec 1987 – Dec 1995 Staff Multi Service Engineer

Schlumberger Oilfield Services

China, Oman, Saudi Arabia, and Aberdeen Scotland

Cementing, Sand Control, Stimulation, Rig Audits, Desc Engineer for clients, and rig installation supervisor.

May 1985 – Dec 1987 Staff and Consultant Multi Service Engineer

BJ Services Ltd.

Aberdeen, Scotland and Thailand

Cementing, running downhole tools, and working on a stimulation vessel.

April 1982 – May 1985 Staff Dual Service Engineer

Halliburton Services

Kingdom of Saudi Arabia

Cementing and Drill Stem Testing onshore and offshore.

Professional Training

Drilling engineering for ERD, High Angle & Complex wells with Merlin ERD Ltd. (2016)

IWCF Supervisor – Combined Level 4(Expires Nov 2018)

RGIT HUET UKOOA course (Expires June 2018)

Offshore Medical UKOOA OPITO (Expires May 2018)

Interests/Activities/Positions of Responsibility

I enjoy running and keeping fit.

I travel extensively with my family.

Tim Davies Drilling Superintendent aczore@r.postjobfree.com

Derek Harrold Drilling Superintendent aczore@r.postjobfree.com

Tim Morton Drilling Manager aczore@r.postjobfree.com

Brian Burford Drilling Supervisor aczore@r.postjobfree.com



Contact this candidate