Sr Piping Designer

Ebodio G. Dominguez aka BO

**** ********* **** #*

Billings, MT 59105

Cell: 310-***-****

E-mail: **********@***.***

Sr. Piping Designer

AutoCAD (CADWorx)

Microstation

Intergraph PDS

Objective

I am seeking a responsible position with a progressive organization offering challenges, opportunity and incentive (Direct and Long Term Assignment).

Summary of Experience:

Engineering Sr. Piping Designer: Experienced with the Supervision, engineering and drafting design room procedures of the multidiscipline and interfaces requirements. I have over 25 years’ experience in the Petrochemical - Refinery Plants - Oil Fields: Downstream: Tesoro, ConocoPhillips, Chevron, Texaco, and Upstream: Chevron, Oxy. I have extended field experience to Support, Supervise, and Direct New Construction from the Assembly and to Installation from start to end. Also I have worked on Pipeline Companies and Water Plants. I have supported the engineering field assignments related to production and process facility modifications on Projects and Steam Distribution Systems. Intergraph PDS experienced with Piping and Equipment Modeling Design Systems, AutoCAD – CADWorx and MicroStation Systems.

Education:

Industrial Drawing

Bakersfield College, Bakersfield, CA

BA Degree - Business Administration.

Coahuila University (1984). Torreon, Mex.

Professional Employment:

WorleyParsons, Billings, MT (01/04/16 – Present)

Engineering Sr. Piping Designer / AutoCAD (CADWorx)

Piping Project Designer: Responsible for the piping design on various projects for the following Refineries: CHS - Laurel, P66 - Billings, HESS - Tioga ND, TESORO Mandan ND, SINCLAIR – Wyoming/Utah. Also Design support with Checking on various projects.

Chevron North American Exploration & Production (HKA / Spartan) (10/03/11 – 05/12/15)

Engineering Sr. Piping Designer / AutoCAD (CADWorx)

Temblor Thermal Area (Upstream), McKittrick, CA: Sr. Piping Designer: Designed new Piping layout to replace and install new piping and Automation System on existing Gauge Setting Modules. Also design Piping and Equipment Layout for the installation of New Steam Splitigator. As-built and update P&IDs.

Mustang Engineering (9/15/08 – 9/30/11)

Engineering Sr. Piping Designer / AutoCAD (CADWorx)

Oxy Petroleum (Upstream), Bakersfield, CA (2/14/11 – 9/30/11): Sr. Piping Designer: Designed the New Piping and Equipment layout for the installation of 4 new FIN Fans at the Low Temperature Separation Plant 1 & 2. Installed New VRU Skid Compressor and replaced existing piping.

Tesoro LAR (Downstream), Wilmington, CA (9/15/08 – 2/10/11): Lead Group Supervisor: Help to establish a New Engineering Mechanical Design Group. Designed, Supported and Directed the field Construction Installation for the modification on existing piping on the T/A, Maintenance and New Construction (Capital and Small Project). Also assist with the engineering design for all Emergency Responses. As-built and update P&IDs and Inspection Isometrics to submit into Document Control.

T. w. Cooper. Torrance, CA (Part Time) (5/2003 - 2/10/11)

Structural Designer / MicroStation / AutoCAD

I produced Structural Layout drawings from the engineering calculation. Also I created Ortho Plot Plans, Sections and Details drawings for several projects of various companies.

WorleyParsons (Tesoro & Chevron Refinery) (7/16/07 – 9/12/08)

Engineering Sr. Piping Designer / AutoCAD

Tesoro LAR, Wilmington, CA: Lead Project Designer; Responsible for the verification & piping replacement on the Berms & Roads Crossing. Project Supervision for the relocation and daylight of the existing underground pipelines on various areas.

Chevron LAR, El Segundo, CA: Designed and Supervised New Construction Installation for the relocation of an existing pumps and process pipelines for the new SRGW Project (New Sulfur Unit).

ConocoPhillips LAR (Principal Tech Service). Wilmington/Carson, CA (7/1998 - 7/13/07)

Engineering Piping Designer / Microstation

Been Responsible for the design of the New Construction, Maintenance and Turn-Around Projects (Capital and Small). Also I assisted on the emergency responses. As-Built and Update P&IDs, Isometrics and Ortho’s from completed Construction and final drawings submitted into Document Control.

T. J. Cross Engineers. Bakersfield, CA (2/1997 - 7/1998)

Sr. Piping Designer / AutoCAD: Piping Layout Design of the 50,000 bbl Soft water Tank System for the AERA Facilities. Design support for the Pipe Routing and Manifolds Distribution of the Production Wells in the CHEVRON projects. AutoCAD Drafting support for the assignments of various projects.

Unocal LAR (ConocoPhillips). Wilmington/Carson, CA (9/1994 - 1/1997)

Piping Designer / Microstation

I was assigned to the field for the walk down of P&ID verification for various units and off-plot piping systems. Updated existing P&ID’s for Process Safety Management compliance. Isometric Drawings created from the existing piping of various producing units. Catch Basins and Sewer Systems field verification for the Los Angeles Refinery. I created a cell library for the Isometric drawings for the MicroStation.

Jacobs –Wolder (Unocal LAR). Signal Hill, CA (8/1993 - 9/1994)

Piping Designer / AutoCAD & Microstation

Walk down assignments to verify and updated P&IDs of various units and off-plot piping systems.

Four Corners Pipeline Co (arco). Bakersfield, CA *(8/1991 - 1/1992)** & (3/1993 - 8/1993)

Piping Designer / Technical Assistant / AutoCAD

I was assigned to As-built P&ID for various Process facilities. I created Isometrics for existing pipeline and pump stations from Kern County to Newhall Area. Produced plot plans, piping layouts, pumps and tanks.

Fluor Daniel, Inc. (Texaco Refinery), Bakersfield, CA (9/1992 - 3/1993)

Piping Designer / AutoCAD: Assigned to Texaco Refinery for the design, AutoCAD drafting and the creation of Isometrics and Orth drawings for the Tank Farm.

Brown & Root Braun, Inc. Alhambra, CA ** (1/1992 - 8/1992)

Piping Designer / Intergraph PDS: Responsible for the pumps design layout of the RAW FEED FCC Unit at ALASKA ARCO CO. Designed Piping, Equipment and Structural Layouts, using INTERGRAPH PDS on various petrochemical projects.

For skip dates See Four Corners Pipeline

Fluor Daniel, Inc. Bakersfield, CA (3/1987 - 7/1991)*

Drafter & Piping Designer / AutoCAD: Manual and AutoCAD Drafting of Isometrics and Ortho drawings for several projects. (P&ID’s, PFD’s, Piping Plot Plans, Mapping Plans, various projects)

Production Data, Inc. Bakersfield, CA (1985 - 3/1987)

Draftsman: Responsible for creating process production data diagrams from oil research data.

Special Training:

Computer Aided Drafting and Design (Intergraph), MICROSTATION 2D / 3D, PDS Equipment and Piping Modeling.

Brown & Root Braun, Inc. Alhambra, CA

Mechanical & Technical Engineering, Piping, Architectural, Industrial Drawing, Survey Mapping & Computer Aided Drafting and Design (AutoCAD).

Bakersfield College, Bakersfield, CA

Microsoft Office (Powerpoint, Word, Excel).

Profile:

US Citizen. I am fluent in English and Spanish (read, write and speak).

References:

Available upon request.

Contact this candidate