Mechanical Technician
Resume:
ROBERT LARS*N
Unit # ***
Nashua, NH 03063
Email *************@*****.***
OBJECTIVE: To obtain a position with in electronics manufacturing company where I can utilize my experience and skills.
SKILLS
Electronics Terminology
Component Identifications
Component Values
Under Microscope Assembly
Printed Circuit Board Assembly
Rework / Repair Techniques
Wire Stripping Techniques
Point-to-Point Wiring (ECO)
Surface Mount Technology (SMT)
Through-Hole
Fine Pitch
IPC-A-610D
EQUIPMENT USED
Oscilloscopes, Fluke meter, Power supply, Ovens, Multimeter, Frequency counter, Spectrum analysis,
Computer go to no go test, Test procedures, Engineering drawing, Schematics, Blue prints, Assembly drawing,
Bill of material, Micrometer, Calipers, Plug gauges, Indicator micrometer, Nikon scope, Power assembly
tools, hand assembly tools and Microscope.
WORK EXPERIENCE
CCS Salem NH / Express Empolyment March to August 22, 2016. Panther Group August 22, 2016 to MARCH 10, 2017.
Job is to data entry off peoples person information for the credit bureau on a system called E-Oscar.
Nel-Tech Labs, Inc. Derry NH, Leddy Group October 31, 2014 to November 17, 2014
Assembler: Duties were to stuff PC boards with electronic parts.
Game Salute, Londonderry NH. June 2014 to August 1, 2014
Assembler: Duties were to assemble board games and do some packing for shipment.
MacClean Automation Systems, Merrimack NH./ Express Employment September to November 2013
Inspection and Mechanical Assembly.
Duties were to inspected cans for rust and size, and mechanical assemble cans. I used a go and on go test. The
cans are used in a electric cigaret.
Burbank Corporation, Wilton NH, Express Employment July 2012.
Mechanical Assembler: Duties were to assemble small plastic parts.
Symmetry Polyvac, Manchester, NH Express Employment, March 2011
Mechanical Assembler: Duties were to assemble medical trays for doctors.
EPE, Manchester, NH Affordale Solutions, December 2010
Mechanical Assembler: Duties were to assemble module to be tested.
METTLER TOLEDO, Bedford Ma. December 2009 to January 2010
MICOTECH STAFFING GROUP:
Cable Assembler: Duties were to build cables and pack cables.
SCULLY SIGNAL COMPANY, Wilmington, Ma.. January 2005 to February 25, 2008
PLACEMENT PROS,Westford, Ma. July 2004 January 2005
Tester: Duties were to build, test and temperature tests prodes. Equipment used were
Oscilloscopes, meters, power supply and ovens. Probes are use to measure liquids levels in
Tanks. Like oil tanks. I also did the final system test on the prodes. A Go and No Go Test.
ABBOTT LABS MEDISENSE/Manpower, Bedford, MA
Material Handler (Labeling Cage): February 2003 to February 13. 2004
Duties are to make kit lots for the packing of the diabetes meters. The procedure for kitting the lots is that you must follow the bill of material list and FDA regulations.
Mechanical Assembler: November 11, 2001 to April 4, 2002
Job duties were to mechanically assemble medical devices.
MEDISENSE/ Pro Services, Bedford Ma
Inspector: September 1996-January 1997/ March 1994- May 1994
Responsible for functional and quality testing of medical devices, such as blood glucose tester.
COGNEX COIRPORATION/TOTAL TECHINCAL SERVICES, INC., NATICK, MA
Test Technician: September 15, 2000-March 30, 2001
Job duties were to test 5000 and 4600 systems with a test system call COG-OP. This system is
A GO and NO GO test system. I also do some troubleshooting of the system some time. Another job duty is to enter rework data and MRB data of 5000 and 4600 systems into a data system QIS.
FLIR SYSTEMS/TOTAL TECHINICAL SERVICES, INC., North Billerica, MA
Calibration Technician: September 1999 -September 1, 2000
Job duties were to calibrate 300,350,390,600,700 Thermacams and Ultra Cameras.
Equipment used were computers, black bodies, ovens, and universal programmer
that programs IC chips.
ANALOG DEVICES/EDA INC., Wilmington, MA
Test Operator: March 1997 - SEPTEMBER 1998
Responsible for the electronic testing of various integrated circuits through a variety of test platforms and circuit handlers. Operate Daymarc, and Aseco ( 170,130 & TL 50’s) handlers. Enter data into CTS, LTS, and LTX systems. Responsible for evaluating test results and coordinating work flow. Package and visually inspect parts. Responsible for following operating and safety procedures.
VARIAN CORPORATION/Tech Aid, Lexington, MA
Mechanical Assembler: February 1996- May 1996
Assembled and tested vacuum gauges.
POLAROID/Tech Aid, Needham, MA
Test Technician: May 1995- January 1996
Maintained and troubleshoot the Helios machine to component level; The Helios Machine (called Helios Model 810 Laser Imager) allows you to print different laser images on dry film.
AMP CORPORATION/Kelly Services, Westford, MA
Incoming Inspection of machine first parts. September 1994- March 1995
Tested fiber optic connectors for lengths, depths, and sized. Operated equipment such as micrometers, calipers, plug gauges, indicator micrometers and Nikon scopes.
WHISTLER CORPORATION/ Tac Temps Corp., Westford MA March 1993- January 1994
PC Assembler: Repaired radar detectors by fixing the wave-guide and assembling the surface-mount PC board.
Bench Technician: 1986-1987 Duties were to test, repair, assemble and troubleshoot
PC surface-mount boards to the component level of the radar detectors.
EDUCATION
MIDDLESEX COMMUNITY COLLEGE, Bedford. MA.
Associates Degree in Liberal Arts and also did extensive studies in electronics.
WENTWORTH TECHNICAL SCHOOL, Lexington, MA
Received a Certificate in Computer Electronic
2011 PLS Electronic Training Program Tyngsboro, MA
Completed: Certificate “Hand-on” Electronic Training Program
IPC-A-610D Certified
PC SKILLS:
MS Windows 2007 Pro, MS Office 2000, MS Outlook Express, MS Windows XP, MS Word, MS Publish.
REFERENCES FURNISHED UPON REQUEST:
Contact this candidate