Mechanical Engineer Project

REYNALDO D.DIAZ

U*** MB-**, Pamayanang Diego Silang, Ususan Taguig City, Philippines

Mob No. +639*********

* ********@*****.***

Skype: gabrob2013

MECHANICAL ENGINEER- HVAC, Fire Protection, Water Treatment & Plumbing

Summary of Experience and Profile

Mechanical Engineer with over 18-years of professional/work experience in MPF Estimation, Site Implementation and Project Management including services Design.

With experience in EPC contractors and Building Services in High Rise Building, Commercial, Residential, MPF fit out works, Kitchen Ventilation & Data Centers.

Experience Pure Water Treatment (Purification, Filtration and Water Softening) including Sewage Treatment System

Having experience working Standard in the following countries: USA, Singapore Middle East (Dubai Abu Dhabi) & Philippines

Experience in the field of HVAC/ACMV (Chilled Water Plant, VRF system, Kitchen Ventilation and Precession Air conditioning System, Plumbing/Drainage and Fire Sprinkler including Pool Filtration system and Water Filtration Purification.

Experience in Testing and Commissioning of MPF Equipment & System, preparation of test reports and documentation.

Experience in BIM work supervision, and preparation of Combined Services Design (CSD) and preparation of Combined Builders Work (CBW).

Familiar with local and International Construction Code and Standards like NFPA, ASHRAE, IPC, ASPE, SPATA and other BSEN Standards. Also has knowledge in LEED Certified Building Construction and Design Sustainability.

Experience in managing engineers, 3D modelers and drafters

Design Drawing, Shop drawings and detailing required for permit and site installation

Familiar and experience in the field of Quality Control, Quality Assurance and Safety Procedures. Also has skill and experience in areas of work estimation/quantity take off, preparation of Method Statement (MS), Inspection and Test Plan (ITP) and Risk Assessment (RA) and other technical reports and documentation

Experience in Aconex that provides the most widely used cloud-based, multi-company project collaboration solutions for construction engineering and Project Management

Experience in design and evaluation for code and standard compliance including review of technical submittals in reference to Contract and Technical Specifications.

Experience and familiar with PEZA documentation and permit process and requirements

*Note: MPF – Mechanical (Air conditioning and Ventilation), Plumbing/Sanitary and Fire Sprinkler

Professional Exposures

Company : MR Engineering Consultants Inc. (Work from home country)

Position : Senior Mechanical Engineer (Design Building Services)

Inclusive Date : May 2015 to Present

Duties and Responsibilities

Manage Design Engineers and drafters in Providing Detailed Design and Drawing packages for Drainage, Plumbing and Drainage, Pool Filtration System and Fire Sprinkler system.

Develop ecofriendly design by utilizing waste energy into useful one

Assist in planning Mechanical system and related building service project goal

Coordinate engineering services implementation to ensure code and other requirements compliance

Attend online calls, local meetings and conference calls for our overseas clients

Establish work plan considering resources of various phases of work

Provide technical advice and resolve problem to ensure that progress is within the project timeline

Validate and checking design for Mechanical and Sanitary System

Assist and Direct team members in delivering engineering design and related things based on projects scope of works

Company : Goudie Associates (Architectural & Fit-out)

Position : Senior Mechanical Engineer

Inclusive Date : April 2015 to May 2016

Duties and Responsibilities

Overall Planning and Management including preparation of Detailed Design and Drawing packages for ACMV, Plumbing/Sanitary Works and Fire Sprinkler system

Oversee Site requirement, coordination, progress of installation and documentation up to project hand-over

Review and recommend system suitable to the current condition of the project

Check implementation to ensure code and other requirements compliance

Attend local meetings and conference calls for our overseas clients

Oversee proper documentation in compliance with local authority and PEZA requirement

Establish work plan considering resources of various phases of work

Provide technical advice to contractors and Architects to resolve problem at site and achieve project timeline

Attend Testing and Commissioning Works at site prior to project hand-over

Assist and Direct team members in delivering engineering design and related things

Company : EcoSolutions Multidisciplinary Engineering Consultancy

Position : Senior Mechanical Engineer (Design Building Services)

Inclusive Date : July 2014 to April 2015

Duties and Responsibilities

Manage Junior Engineers in Providing Detailed Design and Drawing packages for ACMV, Plumbing and Drainage, Pool Filtration System and Fire Sprinkler system.

Develop eco-friendly design by utilizing waste energy into useful one

Assist in planning Mechanical system and related building service project goal

Coordinate engineering services implementation to ensure code and other requirements compliance

Attend local meetings and conference calls for our overseas clients

Establish work plan considering resources of various phases of work

Provide technical advice and resolve problem to ensure that progress is within the project timeline

Validate and checking design for Mechanical, Fire Sprinkler and Sanitary System

Assist and Direct team members in delivering engineering design and related things based on projects scope of works

Company : BYME Singapore Pte. Ltd

Position : Mechanical Engineer (Design Building Services.)

Project : Singapore National Stadium

Inclusive Date : January 2011 to June 2014

Duties and Responsibilities

Manage and prepare Shop Drawing packages for ACMV, Plumbing and Drainage, Pool Filtration System and Fire Sprinkler system.

Manage and provide Combine Builders Work (CBW) & Combine Service Design CSD.

Manage and supervising BIM works (CAD and 3D Modeler) and other Engineer working in other department

Responsible in Coordination works with client Main Contractor (Draggage Singapore), and to other Architect and Engineers.

Responsible of Quality Control and Code checker at site for MEPF System

Assigned as ACMV Engineer in site Production Team as Site Engineer & Testing and Commissioning Engineer.

Attend Design Coordination Meetings at Site & Liaise Subcontractor/Suppliers and Engineers, Drafters and Site Supervisors

Review of important documents like RDS, specifications, Design Shop drawings, Code of Practices, and Equipment manufacturer’s manual.

Assist to Authority Inspection and Actual System Test prior to Temporary Occupancy (TOP) of the Project

Company : PELL FRISCHMANN-Canseco. Ltd (Engineering Consultancy)

Position : Mechanical Engineer (Building Services)

Project : Tiger Woods Gulf Course Development, Mix Buildings at Raha Beach

Inclusive Date : March 2008 to June 2009

Duties and Responsibilities

Undertake Design of Plumbing, Drainage and Fire Sprinkler works to include Chilled Water piping and Plant Room Equipment Chilled Water Pumps, Cooling Towers, Chillers, FCU and AHU, DX and VRV/VRF system, Hot Water System and Pool Filtration System.

MEP Coordination works relative to Architectural, Structural and Landscaping design

Prepare conceptual design to establish important design aspect & space planning like provision of Plant Rooms, Shaft or Riser’s Ducts, as well as routing of Plumbing and Fire Protection services

Design detailing and related calculation of Plumbing and Drainage Services and part of ACMV system

Evaluate or review contractor’s drawings and material submittal

Attend to contractor’s Request For Information or RFI’s and

Overall coordinator for MEP Building Services to establish routing and level of respective services

Company : Hill International (Project Management), Dubai UAE

Position : Assistant Superintendent

Project : The Palm Jumeirah Villas

Inclusive date : Nov 2005 to November 2007

Duties and Responsibilities

Responsible of Site Coordination and Supervision of HVAC, Sanitary/Plumbing and Fire Protection works in Palm Jumeirah Island, to ensure that work be implemented in accordance with approved plans and specifications

Responsible for monitoring daily activities at site to ensure that priority works is being taking care off

Technical support to the workers at site

Follow-up progress of work to ensure that accomplishment is within the schedule

Attend daily meetings with the contractors and consultants to discuss technical issues and other relevant problems, arises at site

Responsible for Quality inspection and code compliance

Responsible for preparing list of critical items and corresponding work programs

Company : D.A. Abcede and Associates, Philippines

Position : Mechanical Engineer

Inclusive Date : Nov.1996 to Nov.2005

Project Completed as Mechanical Engineer project In charge

Gateway Mall (World Class Shopping Mall)

Araneta Center Site Utilities (Underground Piping & STP)

Robinson Place Ermita (Shopping Mall)

SM – Makati (Shopping Mall)

SM – IBM Computer School Building

The Orient Square (42 Storey and 7 Basements) –offices and residential

Araneta Center Central Sewage Treatment Plant (Electro – Mechanical)

Duties and Responsibilities

Primarily responsible for review and design evaluation of Sewage Treatment System, HVAC, Fire Sprinkler, Plumbing and Drainage

Reviewing or re-engineering of plans and specification for a possible reduction of project cost, prior to start the work

Responsible of Quality Inspection and to make sure that installation and procedure is in accordance with the code and standards

Responsible for reviewing changes on bid plans, construction drawings, contract, specification local code compliance and corresponding cost evaluation

Responsible for site Supervision to include participation of Testing and Commissioning team

Responsible in doing quantity take off and project cost estimation

Responsible of organizing meeting with consultant and contractors to discuss technical site issues and other relevant construction conflicts

Upon contract completion, responsible of preparation/gathering close-out documents and other necessary documents prior to hand-over

Other work as required with my position

Company : United Engineers Corporation, (HVAC Contractor)

Position : Cadet Engineer

Inclusive Date : Jan.’96 to May’96

Duties and Responsibilities

Review architectural and structural plans for preparation of HVAC conceptual design

Prepare calculation like pipe and duct sizing

Evaluating and estimating of Plumbing and Drainage Plans and specification

Recommend / prepare technical design data for Plumbing and Drainage

Preparation of work programs and schedule

Preparation of necessary tools, equipments and materials

Managing proper manpower deployment at site

Attended technical coordination meetings

Monitoring and supervising implementation of work to ensure good quality work.

Scholastic Achievements/Affiliation

Bachelor of Science in Mechanical Engineering (BSME) from University of Eastern Philippines.

Registered Phil. Mechanical Engineer with PRC License

Member of Philippine Society of Mechanical Engineers (Makati/Singapore Chapter)

Trainings/ Seminars Attended

Seminar on Fire Protection Design, TYCO Philippines

MEP Revit Customized Training

Short courses in AutoCAD 2010

Training on Fans and Blower Application

Training on Valve Sizing and Flow Metering

Fan fundamentals for commercial applications

72 hours course on Lathe Machine operation

Short course on Plumbing & Fire protection Design

Training on Split AC evacuation and Charging

VRF System Design

Auto-CAD 2010

Training for Aconex

Attendance for HVAC open Forum

Construction Management

HVAC Efficiency and Refrigeration Management

Alternative Dispute Resolution/Arbitration in Bldg. Construction

OTHER SKILL

Heat Load Calculation (Manual and Hourly Analysis Program)

Sprinkler System Manual Calculation

VRF/VRV Design Tool (Design of Equipment and Refrigerant Piping)

Sprinkler Hydraulic Calculation (Manual)

AutoCAD MEP

Driving

Personal Details

Date of Birth : 18 January 1971

Marital Status : Married

Driving License : Holding a Philippines and UAE Driving License

I hereby certify that all of the above information is true and correct to the best of my knowledge and belief.

Reynaldo D. Diaz

RME, PRC License No. 0049254

Contact this candidate