Structural Engineer (Offshore) with 16 Years Experience
Resume:
CURRICULUM VITAE
NAME : MOHAMMAD SHAFQUAT KHAN
DATE OF BIRTH : 28/08/1976
NATIONALITY : INDIAN
EDUCATIONAL QUALIFICATIONS
M. Tech. from I. I.T, Roorkee, India - 2001
B. Tech. (Civil) from A.M.U, Aligarh, India - 1999
COMPUTER EXPOSURE
SACS 5.6, MSC / Nastran, MS Office, Math Cad.
SYNOPSIS OF PROFFESSIONAL EXPERIENCE
16 Years of Structural Engineering experience in Design and Detailed engineering, Construction of Offshore structures. This includes Conceptual, FEED, and Detailed EPC phase of engineering on various Greenfield and Brownfield Projects as well as Operating Company experience in Offshore Oil and Gas Industry. It includes:
Providing Technical / Engineering Support for Structural Works to the Field Operations under Asset Division.
Providing PMC services during FEED and EPC Stages of the Project.
Review of Client Technical Documentation and Requirements in PMC role.
Structural Engineering of Jackets and Topsides for New Fixed Offshore Platforms, Brownfield Modifications for Existing Platforms including Re-Assessment of Existing Jacket and Decks, and Topside Modules associated with FPSOs.
In-Service Analyses (Inplace, Fatigue, Seismic, Push-over & Blast Analysis) and Pre-Service Analyses (Upending, Lifting, Load-out, Transportation & On-Bottom Stability Analysis).
Weight Control Report, Local FEM checks.
Preparation of Specifications, Material Requisitions, Technical Bid Evaluation of Vendor Offers, Review of Vendor Data and Drawings.
Bid Engineering, Interface Coordination with Marine, Fabrication Yard, Other Engineering Disciplines and Client.
Perform Construction Engineering related activities such as check of Fabrication Drawings and miscellaneous structural design works.
Good knowledge of various International Codes such as AISC ASD, API RP2A- WSD and DNV Codes & Standards.
CHRONOLOGICAL DESCRIPTION OF PROFESSIONAL EXPERIENCE:
November 2014 – December 2016 : ABU DHABI MARINE OPERATING COMPANY (ADMA-OPCO),
ABU DHABI, U.A.E.
Position Held : Structural Engineer, Engineering Support Team,
Zakum Operations Technical Support Division (ZKOTSD)
Major Projects Handled:
Replacement/Refurbishment of Boat landings in ZWSC and ZCSC.
Chemical Injection Facilities and Solar Panel Platform on ZK-WHTs (2nd Phase)
Revamp of HVAC System in PGB of USSC & ZWSC
Installation of MPFMs, Phase-III in ZK-WHTs.
Upgrade of Fuel Gas System in ZCSC-UP
Accommodation Expansion at US & ZK
Replacement of Cranes at ZWSC-ZAP and ZCSC-EP & UP
Replacement of 11kV Switchgear at ZWSC-PGB
Replacement of Timber Helideck with Aluminum on WHTs
Responsibilities include providing Operational Technical Support for Structural Works to Zakum Field Operations including Engineering, Projects, and Maintenance support services. This included:
Develop Engineering Packages (Scope of Work, Specifications) and provide Technical Support to Project Team during EXECUTE. This involved review of Contractor Design Documents, Detail Drawings, Technical Queries and Variation Orders.
Develop scope for engineering studies and manage services provided by external Engineering Consultant.
Carryout Technical Evaluation of Contractor / Supplier Bids / Proposals.
Carryout engineering studies, site visits and provide structural works package to Engineering Work Requests (EWRs) and Plant Modification Requests (PMRs) raised by Site.
Initiate Budget Request / AFE for agreed engineering studies requiring external resources. Monitor and Cost Control for all budgeted engineering studies.
Provide Statement of Requirements including design basis for Project managed by other Divisions.
Provide Repair Package for Structural Anomalies / Work Orders including Detail Drawings as required by Maintenance Team for carrying out Refurbishment works.
Review of ADMA-OPCO new and revised Standards/ Specifications / GDL.
Participation in Risk Assessments / Risk Register Meetings.
December 2012 – November 2014 : TEBODIN MIDDLE EAST LTD, ABU DHABI, U.A.E.
Position Held : PMC Structural Engineer
Major Projects Handled:
ADMA-OPCO ZWSC +100MBD Modification Project
This EPC Project comprised the modification works required at ZWSC in order to handle additional 100 MSTBPD oil productions from Thamama IV and V. The structural scope of work includes the new deck extensions and strengthening at existing CSP and RP platforms and the connecting Bridges B5 and B8. Additionally, the scope includes the new Bridge B14 & LCR Building to be supported on new Bridge Support Towers S10 and S11.
ADMA-OPCO USSC Slops and Drains Project
The structural scope of work includes the new deck extensions and modification works required at existing 36”MOL Platform and Bridge B7 due to Slops and Drains to be modified at USSC.
Responsibilities as PMC Structural Engineer included review of ADMA-OPCO Technical Documentation and Requirements. It includes review of the Structural deliverables produced by the Contractor, Technical Queries, and Variation Orders. To interpret ADMA-OPCO Specifications & Standards, Scope of Work intended for the Project and direct the Contractor accordingly.
May 2008 – November 2012 : NATIONAL PETROLEUM CONSTRUCTION COMPANY (NPCC), ABU DHABI, U.A.E.
Position Held : Senior Structural Engineer
Major Projects Experience:
ADMA-OPCO ZWSC +100MBD Modification Project
Worked as Lead Structural Engineer on this Project.
Responsibilities include review of structural analysis reports, carrying out engineering check of structural drawings and review of inter-discipline drawings, interface coordination with other engineering disciplines, marine, fabrication yard, subcontractors and client. Perform construction engineering related activities such as check of fabrication drawings and miscellaneous structural design works.
ZADCO Jarnain & OS-IIA Platforms Project
The scope of the work includes the design, engineering, procurement, fabrication, onshore commissioning, load out, sea fastening, transportation. The work includes a tripod jacket and bare deck at Jarnain field (Depth 35.0m) and Tripod jacket at OS-II field (Depth 13.0m).
Responsibilities included performing various In-Service (Inplace, Fatigue) and Pre-Service Analyses (Lift, Load-out, Transportation, On-Bottom Stability) and design, preparation of design reports, calculations and Material Take-offs, providing Technical assistance to Lead Engineer in miscellaneous structural design works, carrying out engineering check of structural drawings and Yard engineering activities.
ADMA-OPCO Integrated Gas Development Project (IGD-HAP Project)
The project comprised of New Habshan Platform (HAP) at USSC, New remote Flare Tower (HAP Flare), new interconnecting Bridges (B24 and B25) and Support Structures (S11 and S12) between HAP and the existing USSC, Modifications to existing structures at TA-NGTP Bridge B14 / B15, and Bridge Support Structure S4. The scope of the work includes the design, engineering, procurement, fabrication, load out, transportation and installation of HAP deck by float-over method.
Responsibilities included performing various In-Service (Inplace, Fatigue) and Pre-Service Analyses (Lift, Load-out, Transportation, On-Bottom Stability) and design, miscellaneous structural design works, preparation of structural design basis and specifications, material requisitions, technical bid evaluation of vendor offers, design reports, calculations and Material Take-offs, providing Technical assistance to Lead Engineer in carrying out engineering check of structural drawings and review of inter-discipline / vendor drawings, on-site technical assistance to Yard during fabrication & erection.
Maersk Oil Qatar Al Shaheen Field Development Project
Major responsibilities included design of various components used in the fabrication of the Deck which includes secondary beam, Access Platform, Pipe support & Dropped Object study. Material Handling Philosophy which includes Monorail, Pad eyes, lifting Lugs & Trolley movement, Preparation of design reports & calculations, providing on-site technical assistance to Yard during fabrication & erection.
July 2006- April 2008 : NAMA MOTT MACDONALD, ABU DHABI
Position Held : Senior Structural Engineer
Major Projects Handled:
ADMA-OPCO Addition of 10 New Wells on Existing ZAKUM WHT’s Project
It involved addition of 10 new wells on 5 exiting well head towers namely ZK-26A, ZK-35, ZK-37, ZK-62 & ZK-95. Work included In-place analysis for jacket and deck, boat fender design, miscellaneous structural design works related to new deck extensions, weight control report preparation, along with 100 structural drawings for modification and extension of platforms on above mentioned well head towers.
ADMA-OPCO Wellhead & Manifold Tower – UDS “Optimum Design & Standardisation” Select Stage Study
It involved standardization of Deck for simple well head towers, junction towers for 16 conductors and manifold towers for 12 and 16 risers. It also involves the standardization of Jacket for all above deck in water depth range from 5.0m to 35.0m. Inplace analysis of Deck and Jacket were carried out.
ZADCO Gas Injection Topside Facilities – EPCM Services for UZ Full Field Development Thamama II – WAD Phase 1
It involved installation of new topsides systems on existing WHT’s PW-32, PW-62, PW-68, PW-109 and ZW-90 and on a new platform PW-54A for gas injection for reservoir pressure maintenance using the Water Alternating Gas (WAG) Injection concept.
Responsibilities include all design works related to new deck extensions required for gas injection facilities, such as Global Inplace analysis to check the adequacy of the existing platform topsides for all the above Wellhead Towers, checking of structural design drawings, MTO preparation, and site visits to collect necessary data.
July 2001- June 2006 : TRIUNE PROJECTS PVT. LTD. NEW DELHI, INDIA
Position Held : Senior Structural Engineer
Major Projects Handled:
Deputed to SAMSUNG HEAVY INDUSTRIES, Geoje Shipyard, South Korea (Sep.2005-Jun 2006) for the following offshore Projects:
- Sakhalin II Phase II Project Facilities Design of LUN-A and PAB Topsides (Client: SEIC)
Design activities carried out were Sea-fastening Design, Mooring Analysis and design, Load-out Analysis and barge local strength analysis for various load-out sequences of topside from the yard onto the barge.
- West E-Drill Project (Client: Smedvig)
Involved in analyses and design of crane pedestal, crane boom rest, burner boom, dropped object analysis and temporary supports design for erection blocks of semi-submersible drilling rig platform using MSC/Nastran and SACS Software.
Deputed to AKER KVAERNER E & C, Singapore (Dec.2004-Feb.2005) for basic engineering for Panyu4-2/5-1 Wellhead Platform FEED Modifications Project.
The job involved the analysis & design of Jacket and Topsides for Inplace, Dynamic and Seismic conditions, using SACS Software Package.
Bongkot Field Development Project – Phase 3C Offshore in the Gulf of Thailand (Owner : PTT Exploration & Production Public Company)
Performed Inplace, Lifting, and Transportation Analyses for Bridge Support Platform (BSP) and Sour Process Platform (SPP) Topsides for M/s. Aker Kvaerner, Singapore.
ERHA FPSO Project
(Client: SAIPEM, France; Owner : Exxon Mobil)
Project involved Analysis & design of topsides modules (8 Nos.) to be installed on the hull of FPSO. The modules were analyzed and checked for Inplace, Lifting and Transportation conditions. The analysis and design were carried out using SACS software package.
Local Analysis and Design for Pipe Support, Equipment Supports, Equipment Supporting Platforms, Access Platforms etc. Verification of Secondary framing beams, Nodes Connection design.
Deluge System at SA, NA Platforms, Bombay High
(Client: ONGC)
Central Processing Platform No. 3 (CPP3), Topside Facility (above MSF)
(Client: Keppel Fels, Singapore; Owner: Vietsovpetro / Petechim, Vietnam)
MISCELLANEOUS DETAILS
PASSPORT NO : J6498665
VALID UPTO : 04th MAY 2021
DATE OF BIRTH : 28th AUGUST 1976
FATHER’S NAME : RAMZAN ALI
PERMANENT ADDRESS : C-33, BASANT VIHAR, DELHI ROAD,
SAHARANPUR, U.P., INDIA – 247001
CORRESPONDENCE ADDRESS : P.O.BOX 73754, ABU DHABI, U.A.E.
CONTACT NOS. : +971-**-******* / 6692340
EMAIL-ID : ********@*******.***
CURRENT LOCATION : ABU DHABI, U.A.E.
SKYPE ID & SKYPE EMAIL : shafkhan76 & ********@*******.***
REFERENCES
1.Mr. KINTALI S N GUPTA,
Engineering Support Team Section Leader,
Zakum Operations Technical Support Division,
Abu Dhabi Marine Operating Company (ADMA-OPCO),
Abu Dhabi, U.A.E.
Contact No. +971-**-*******
2.Mr. RIZWAN BEG,
Lead Structural Engineer,
National Petroleum Construction Company (NPCC),
Abu Dhabi, U.A.E.
Contact No. +971-**-*******
Contact this candidate