Quality Control Inspector/ CNC Machinist
Resume:
Richard D. Smith
Quality Control Inspector /CNC Machinist
Alvin, Texas 77511
Cell: 979-***-****
*************@*****.***
OBJECTIVE
I’m seeking full time work as a Quality Control Inspector or a CNC Machinist.I enjoy Inspection work and also Setting up and running CNC Machines.
At present I work for NAPA as a Company Driver.
I’m ready to get back to my Trade as a Quality Control Inspector, I also have done Audits for Schlumberger.
Or getting back on a CNC Machines.
Precision Tooling / Metrology
Experience with the following precision tools
O.D. Micrometers, I.D. Micrometers, Analog and digital Calipers, Depth Micrometers, Dial
Bore Gages, Profilometers (roughness gage), Gage Pins, Gage Blocks, Gagemaker tooling such as Rolls to check O.D. or I.D Threads. Groove Gages, Blade Micrometers, O.D. Anvil Micrometers, UV Gage Wall - Thickness, Optical Comparators, Micro-Hite Gages, Mitutoyo CMM, Starrett CMM, Wall Thickness Micrometers, Tooling with these names Starrett, Fowler, Brown & Sharpe, Chinese brand tooling. Micrometers, Tri-Bore gages, Dial Bore Gages, 0-1” travel indicators and also test indicators with 015 travel. Inspecting parts to the .0001 of a thousandths. And using Fowler, Brown & Sharpe, Also using a Hardness gage to verify material is the correct hardness (Normally class C Rockwell) and reviewing the Material Certifications to make sure we are machining the correct material. I have my Certification in (GD&T Tolerancing). I have training in using Metric blueprints or common SAE Decimal blueprints. I’m familiar with many threads from API, standard unified fine or rough, CAM-P threads, New VAM,VAM ACE, Buttress,Hydril double start threads.I have experience with
with NDT,Dye penetrant testing for Porosity, cracks or flaws in the material especially in
API threaded areas. Ultrasonic wall thickness gages (Mitutoyo, Fowler)
I also have experience running a Zeiss CMM. I have a lot of experience inspecting various materials such as Inconel, Stainless steel 300 and 400 series, Carbon steel, Titanium, various Aluminums Nitronic 60, Nitronic 50. Egg shaped parts, Tapered parts as well as other normal issues with precision machining and fabrication. And more precision tooling commonly used in most machine shops.
SUMMARY OF EXPERIENCE
Machined and Inspecting Precision parts in Metric or Inch. Commonly down to .0001 of an inch or closer.Inspecting close finishes per print (12 – 63 ). Also very close tolerance radii 1 - 360 .
I have extensive experience with both Machining and Inspecting of Seismic tooling while working for Western Geophysical.
I also have extensive experience with Downhole tooling, such as Safety Valves, FRAC / Perforating, Well Completions, Sand Control tooling I learned while working at Schlumberger.
I also have job shop experience with parts and tooling from the Oil & Energy Industries, Electronic, Aerospace, Chemical Industries.
Companies such as Halliburton, NOV, Weatherford, Schlumberger and Western Geophysical.
My LinkedIn account will give you a good look at my experience and skills
https://www.linkedin.com/in/richard-d-smith-303533102https://www.linkedin.com/in/richard-d-smith-303533102
https://www.linkedin.com/in/richard-d-smith-303533102
https://www.linkedin.com/in/richard-d-smith-303533102
SUMMARY OF HISTORY
I have 10 + years working as a Quality Control Inspector.
I have 17 years setting up and running CNC Lathes and Mills
I also have experience in small to medium size companies as well. I have my Certification in (GD&T Tolerancing). I have training in using Metric blueprints or common SAE Decimal blueprints. I’m familiar with many threads from API threads measuring the form, depth, O.D.size also using the GageMaker tooling to check thread stand off. standard unified fine or rough, CAM-P threads, New VAM,VAM ACE, Buttress,Hydril double start threads. I have experience with
e with NDT, Dye penetrant testing for Porosity, cracks or flaws in the material especially in
API threaded areas. Ultrasonic wall thickness gages (Mitutoyo, Fowler)
I also have experience running a Zeiss CMM. I have a lot of experience inspecting various materials such as Inconel, Stainless steel 300 and 400 series, Carbon steel, Titanium, various Aluminums Nitronic 60, Nitronic 50. Egg shaped parts, Tapered parts as well as other normal issues with precision machining and fabrication.
WORK HISTORY
Houston Foundry & Machine
Jan.2015-August.2016
Houston, Texas
Quality Control Inspector Laid off - Low Oil Prices
I was responsible for all First Articles and Final Inspections. Also the company's’ calibration of all precision measuring tools.Some companies refer to this as M&TE. I also tagged and documented any parts that were out of tolerance (NCR, MRB). I would report all my measurements either good or bad to the production manager. (SOP) The manager would get back with me on what needs to be shipped or with a Non-conforming part or parts to USE AS IS, REWORK or Scrap. I would segregate the parts to be shipped. And the Machinist would fix the reworkable parts and the scrap went into the recycle area.
APEX Manufacturing
Apr. 2014 - Dec.2014
Quality Control Inspector / Supervisor
Stafford, Texas
I was responsible for all First Articles and Final Inspections. Also the company's’ calibration of all precision measuring tools.Some companies refer to this as M&TE. I also tagged and documented any parts that were out of tolerance (NCR, MRB). I would report all my measurements either good or bad to the production manager. (SOP) The manager would get back with me on what needs to be shipped or with a Non-conforming part or parts to USE AS I S, REWORK or Scrap. I would segregate the parts to be shipped. And I would supervise the machinist and help with troubleshooting when the machinist was having issues with the machine, and getting the problem fixed so we were making good Quality parts.
Engelbrecht Manufacturing
Jan. 2013 - Feb. 2014
Rosenberg, Texas
Quality Control Inspector / CNC Machinist I Quit we are still friends.
I was responsible for all First Articles and (M&TE) Calibration of the Companies and Machinist precision tooling. Other responsibilities were checking the machinist in-process data sheets. Another responsibility was writing of a NCR and segregating the parts, and also tagging and documenting any parts that were out of tolerance. And I set up and ran a Okuma Lathe.
SCHLUMBERGER
FEB. 2001 - NOV. 2012
Alvin, Texas Laid-off
Quality Control Inspector ( 8 years)
CNC Machinist ( first 4 years and 6 months)
I was responsible for Incoming Inspection and First Articles and (M&TE) Calibration of the Companies and Machinist precision tooling. Other responsibilities were checking the machinist in-process data sheets. Another responsibility was writing of a NCR and segregating the parts, and also tagging and documenting any parts that were out of tolerance.
Before being a Quality Control Inspector. I ran CNC machines. Schlumberger at Ardmore St. in Houston
I would receive my Planner /Router with my program and Blueprints and Tool list and, I would go get the Material and make sure it was correct per drawing and Router. I would load and set all tooling, prepare soft jaws or use hard jaws. Make sure all inserts were correct. And I would run the part or parts and make sure that all Dimensions were correct and all finishes were in tolerance. I machined completion parts for 2 years and moved up to the Safety Valve Dept. for 2 years and 6 months and set up and ran closer toleranced parts. Then I asked to be transferred to SRC Rosharon as a Quality Control Inspector.
Western Geophysical
Feb. 1988- Oct. 2000 The Plant Closed Down
Alvin, Texas
CNC Machinist
My High School recommended me for the 2 year Government sponsored apprenticeship, working for Western Geophysical. I was very fortunate to be picked for this Training, it was a paid training into a skilled trade that would support me and my family. The main objective was to train me and 9 other students to be Journeyman Machinist, We also took a Metal Trades class at Alvin Community College. I/we trained 6 months on CNC Lathes and 6 months on CNC Mills. The remaining year I learned and worked on a Brake Press, and deburr, and Inspection, and also Assembly. I set up and ran a Variety of different types of CNC Machines. Mori Seiki TL-5
CNC lathe, Mori Seiki TL-5, SL-6, SL-4 FANUC controls,Okuma,old Allen Bradley tape feed,Yasnac, Mazak with Mazatrol control CNC lathes, and CNC mills. I also was trained on Manual Machines, Bullard, and a Bridgeport mill.
EDUCATION
THIS IS A LINK TO MY TRAINING AND CERTIFICATION
https://drive.google.com/file/d/0B3FA1DHi-cEkLW1zeVJucU94UWs/view?usp=drivesdk
Alvin Community College, Alvin, Texas
1 year college, technical or vocational school
Technical: metal trades
GPA: 2.8
Graduated 1987 Alvin High School
Metal Trades Jan 15, 1985 - Jan 15, 1987
Alvin High School
Vocational training in Metal trades
Apprenticeship Journeyman Machinist Certification
GD&T training Certification
Engineers Edge, Houston, Texas
Mazatrol Programming Certification
Mazak Corporation, Texas
QHSE Certification
ATF Licensed
Clearance for handling Explosives License
Computer Skills
Email Software (Outlook,Google, Safari, Thunderbird, etc.)
Internet Browser (Internet Explorer, Firefox, etc.)
Peripheral Devices (Scanners, Printers, etc.)
Personal Computers
Word.Processing Software (Word,. Pdf, WordPerfect, etc.)
Additional Computer skills with ERP Intuitive 8.5 and E-matrix, writing Data sheets, writing NCR's or MRB
Additional Skills
ASME Y14.5-2009 GD&T Tolerance Certification. QHSE Training, Lean Management
ISO 9000:2008 Training, SIX SIGMA Training (Yellow Belt). 5S training, STOP training, Mazatrol EIA Training
Certification. CPR, Overhead Crane, Forklift
Driver's License Class C - Standard Driver's License
References
Jose Garcia
Mechanical Designer
Schlumberger
********@***.***
Victor Navarro
Schlumberger
Machine shop supervisor
********@***.***
Brian Engelbrecht
Engelbrecht Manufacturing
(Owner)
Susan Brader
BHI Corporation
(Owner)
Contact this candidate