Jimmy Balmaceda Linao

acy4m4@r.postjobfree.com

Mobile # +966-**-***-****

Skype id: acy4m4@r.postjobfree.com

SENIOR PROCESS OPERATOR

** ***** ** **********

EXECUTIVE SUMMARY

Professional experience:

With 17 years of experience in the field of operations in 5 different process plants, very well in analysing, reviewing and troubleshooting skills relating to resolving operational technical problems and Proficient in reading the Process Flow Diagram (PFD) and Piping & Instrumentation Diagram (P&ID). Knowledgeable in operating (DCS) Distributed Control System and interpreting logic diagram. Highly competent in operating industrial plant machines such as pumps, compressors, gas turbines, utilities and other process equipments.

Technical knowledge:

1. Routine Checks of all Equipment and Units to ensure that they are Functioning Correctly in Accordance with Standard Operating Procedure.

2. Reporting all Equipment and Instrument Defects and Leaks Immediately to my Executive Engineer and take Possible Corrective Action.

3. Checking and Recording in the Plant Log Sheet Each and Every Hour a variety of Reading such as Oil and Gas flow, Temperature and Pressure and Record usual Occurrences after reporting them to my Executive Engineer.

4. Start, Check and Stop Pumps Locally According to Instructions or in case of Emergency.

5. JSA-JOP SAFETY ANALYSIS like pre Tour Job Safety, Work Permit System, Group Meeting, Tool box Talk and LOG OUT/ TAG OUT.

6. Isolating Draining, Purging and Handing over Equipment for Maintenance on Inspection and Check the Equipment for its Correct Operations When the Maintenance job is completed.

7. Carrying out the Routine weekly Run test of Equipments like Emergency Diesel Generator, Diesel and Electrical Fire Pumps, etc.

8. Unloading Chemicals into Tanks for Injections Start and Adjust the Flow rate of Chemical Injection Pumps as Required.

9. Checking the water/oil interface level in Sumps Tanks and operate their Pumps locally when they required.

10. Initiating and Lead Fire Fighting or other Emergency Actions in my Area until it is taken over by Higher Authority.

Interpersonal skills:

1. Self-confidence

2. Positive attitude

3. Communication

4. Team player

5. Critical thinking

6. Time management

7. Multi-tasking

8. Flexibility

9. Accept feedback

10. Strong work ethics

EDUCATION AND TRAINING

EDUCATION:

Year :

BATAAN POLYTECHNIC STATE UNIVERSITY

Bataan, Philippines

2001-2003

Course: Two-Year Trade Technical Curriculum (Major in Automotive Technology)

Year :

UNIVERSITY OF SANTO TOMAS

Manila, Philippines

1986-1991

Course: Bachelor of Science in Architecture

Year :

PENINSULA SCHOOL

Limay, Bataan

1982-1986

TRAININGS:

N6.6 Continuous Polymerization Operator Job Training

N6.6 Utilities Operator Job Training

N6.6 HTF and Waste Water Unit Operator Job Training

ENVIRONMENT PERMIT REQUIREMENT AWARENESS

ISOLATION OR REMOVAL OF PRESSURE RELIEF DEVICE

LEAK DETECTION AND REPAIR

LIFE SAVING RULES (LSR)

OPENING PROCESS EQUIPMENT AND PIPING

SAFETY SYSTEM BYPASS

TENETS OF OPERATIONS AWARENESS TRAININGCODE OF CUNDUCT & ETHICS

CONFINED SPACE ENTRY (SSW Permit Approvers and Area owners)

FORKLIFT TRAINING

LOCK TAG AND TRY (Authorized Employee)

SCABA/SABA GENERAL TRAINING

FLOWSERVE MECHANICAL SEAL TRAINING

GEHO PUMP (PISTON DIAPHRAGM PUMPS WITH HEAT BARRIERS) OPERATION AND TROUBLE SHOOTING

CHEMICAL RISK / MANAGEMENT

JOB SAFETY AND ENVIRONMENTAL ANALYSIS

QUANTITATIVE RISK ANALYSIS

HEALTH AND SAFETY GENERAL TRAINING

BASIC FIRST AID

PERMIT TO WORK SYSTEM`

OERTM OFFSHORE EMERGENCY RESPONSE (TEAM MEMBER)

HYDROGEN SULFIDE BREATHING APPARATUS (H2S/BA)

TROPICAL BASIC OFFSHORE SAFETY INDUCTION EMERGENCY TRAINING (TBOSIET)

INDUSTRIAL FIRE FIGHTING TRAINING

BASIC INDUSTRIAL CALIBRATION

MVC PRODUCTS SAFETY HANDLING

STORAGE/HANDLING TANK TRUCK AND BULK RECEIVING OF PETROLEUM PRODUCTS

BASIC PROBLEM SOLVING PROCESS AND CONTROL

QUALITY WORKPLACE USING 5 S

LUBRICATION SEMINAR

JETTY/MARINE EMERGENCY RESPONSE TRAINING

VISION/MISSION/CORE VALUES

BASIC SAFETY

ANSI PUMPS AND MECHANICAL SEAL SEMINAR

TLV STEAM TRAP MANAGEMENT

PERSONAL DETAILS

Date of Birth: February 11, 1969

Nationality: Filipino

Marital Status: Married

LANGUAGES

Language : ENGLISH Level: excellent

Language : TAGALOG (Filipino) Level: excellent

Language : FRENCH Level: beginner

WORK EXPERIENCES

04/16 PRESENT

10 MONTHS PETROCHEMICAL CONVERSION COMPANY LTD. (CPCHEM)/

SENIOR OPERATOR / OPERATOR TRAINER

Tasks:

Developed a variety of learning methods and techniques are included in the Training Guide to address the three senses in which people receive information:

Visual - Pictures, text, drawings or other aids that allow the learner to see and register.

Auditory - Actual sounds, explanations and discussions to support what has been seen.

Kinesthetic - Hands-on touching and adjusting to confirm what has been seen and heard.

Incorporating all three of the senses enables the trainee to learn more quickly and to retain more information.

The Training Guide developed serves as a roadmap providing directions to what should be learned, where the resources can be found, and how to study, practice, learn and ultimately qualify in the position.

To maximize learning opportunities for trainees

Special Instructions Regarding the Activities and Knowledge Objectives

Coaches and Evaluates Trainees.

06/16 12/16

7 MONTHS SAUDI POLYMER CORPORATION (CPCHEM)/

OPS SUPPORT for TURN-AROUND / START-UP (SPECIAL ASSIGNMENT)

Tasks:

Supported operations in shutting down and starting-up the Ethylene unit. Furnace and Compressor units.

Participated in updating the progress of the Turn-around.

Served as SAFETY COACH while the unit is down.

Make sure all task are done in a timely and safe manner.

08/15 04/16

8 MONTHS PETROCHEMICAL CONVERTION COMPANY LTD. (CPCHEM)/

PRODUCTION OPERATOR

Tasks:

Maintain proper operation the Nylon 6, 6 Unit.

Communicate/coordinate with others

Perform routine management of equipment within operating guidelines. Major equipment includes:

1. Heat Transfer Fluid

2. Continuous Polymerization

3. Pelletizer

4. Utilities

5. Waste Water

6. Adipic Acid

7. Salt Reactors

Interpret sample results for the Nylon 6, 6 Unit

Evaluate Nylon 6.6 operational and mechanical problems and affect solutions

Monitor safety and safety systems. Control equipment and processes within environmental regulations and standards

Maintain outside operating equipment, systems and processes within operating parameters

Perform the associated board operator steps to startup / shutdown unit and equipment

Respond to emergency operations during equipment outages and upset conditions

Respond to emergency upsets and shutdowns

Participate in training

10/13 08/14

10 MONTHS SHERRITT AMBATOVY NICKEL PROJECT/

PROCESS TRAINER

Tasks:

Developed the knowledge and skill check wherein a trainee is put in a task or performs a task and put themselves to the test under the guidance of the trainer. Reinforcing procedure (SOP) and consideration how to perform the task is an indication of how the trainee understands the task.

Schedule and organized all HS training required of all personnel and ensure that they are all up to date in all trainings.

Assess all Malagasy operators and ensure plant SOP s are being followed, safety as always is being address, and define to them their weakness, areas needed for improvement and design a training that suits their needs.

Organized and facilitate the daily operation toolbox meeting and ensure the on duty is aware of the on-going and pending maintenance activity, critical monitoring and housekeeping, address any safety concern and ensure every personnel is ready and safety in place before going in the field.

Evaluate their competency and design a test package that provide motivation for learning and help them improve their skills and ability.

Train and coach Malagasy operators shift task -, and provide discussion regarding the activity or training done.

Gives the trainee an option to engage in the training process, asking question at different steps in the procedure which is a good way to embed evaluation with teaching.

Conducts evaluation to trainees, should become continues level and stages of learning.

05/11 09/13

2 YEARS/ 4 MONTHS SHERRITT AMBATOVY NICKEL PROJECT/

PRODUCTION/FIELD OPERATOR

Tasks:

Responsible in the field operation of 348,000 tonnes/month of ore through the PAL autoclaves, exceeding the 70% nameplate capacity, which has made Ambatovy become the world s largest lateritic nickel mining, processing and refining group.

Witness and Participate in pre operational verification and testing activity on all equipments which includes vibration test, load test and loop checking.

Ensures that the POVT (pre operational verification and testing) activity complies to the vendors specification and recommendation.

Conduct and perform equipment isolations in high pressure acid leach section during POVT activity in compliance to PTW system (Permit to Work System).

Conduct and formulate standard operating procedure for high pressure acid leach circuit for start-up, shutdown and normal operation.

Participate during plant walk down and give some recommendations for process improvement.

Participate and perform punch listing during plant walk down to ensure that all equipment and instruments adheres to piping and instrumentation diagram given by the contractors.

06/10 05/11

11 MONTHS MAERSK OIL QATAR/

PRODUCTION OPERATOR

Tasks:

Witness and participate the pre-commissioning of the 14,000 barrels/day of oil production platform at GPC yard in Musaffa, Abu Dhabi, UAE. Works include punch listing, line hydro testing, air blowing of line for IA and Nitrogen.

Participate in the commissioning of the following equipments; (2 x 6.25 MW Gas Turbine Generator, Gas Sweetening Unit, Gas Dehydration Unit, Vapor Recovery Unit, 2 x 9.5 mmfscd Gas Injection Compressor, Custody Transfer Metering Skid, Nitrogen Membrane Plant, 2 x 5.5 KW Emergency Diesel Engine Generator, Air Compressor)

Responsible in the Field operation of 14,000 barrels of crude oil/day from Well Head, Separators, Gas Injection Compressor, Gas Turbine Generator, Gas Dehydration and Sweetening Unit, Vapor Recovery Unit, Water Injection system and Plant Utilities in a weekly rotation basis per area.

Calculate and monitor chemical injection rate to ensure that chemical injection target is attained. Chemical injection include to Corrosion Inhibitor, De-Emulsifier, Methanol Injection, pH control, anti-foam injection in GDU/GSU contactor, oxygen scavenger, pre-Chlorine injection and anti-scalant.

Adjust plant operating parameters as required, validates instrument signal and take immediate response to unusual operating condition.

Ensuring work permit requirements are meet and coordinate to concerned group individual.

Performed first line of maintenance task. Maintenance job limited to suction strainer cleaning, level transmitter flushing, lube oil filling in running pumps and arresting minor leak.

Performed other duties required to achieve maximum productivity.

03/08 05/10

6 YEARS/4 MONTHS LIMAY LOCAL GOVERNMENT UNIT/

MUNICIPAL ENGINEERING OFFICE (BUILDING INSPECTOR)

09/02 01/08

6 YEARS/4 MONTHS PETROCHEMICAL CORPORATION of ASIA PACIFIC/

OPERATOR for POLYMERIZATION- DCS TANKFARM BOARDMAN

Tasks:

Lead the field operators in the operation of the Polymerization section on a shift basis including:

1. Purification Towers

2. Catalyst and co-Catalyst unloading

3. Propylene Recovery system (Distillation)

4. Fuel and Heptane Tank farm

5. Low and High Pressure Boilers

6. Demineralized Water System

7. Cooling water and Tower System

8. Instrument

9. Conveying Air Compressor

Carried out effectively the start-up and shutdown procedures on polymerization in accordance with written Standard Operating Procedure.

Monitors and operates regularly of process equipment and record hourly process parameters.

Maintain good housekeeping and observes safety and practice all the times.

Constant monitoring in the operation of the Tank farm Section on a shift basis including Propylene Vertical Centrifugal Pumps, Screw Compressor Refrigeration Unit, Flare System, Utilities such as High and Low Pressure Steam Generators, Plant and Air Compressor, Fire Fighting Alarm System, Control Valves (Piston and Diaphragm Actuated) and Marine Unloading Arm.

Updating log sheet for proper recording of all necessary data on regular basis, daily updating of tank inventory especially during transferring and unloading of propylene.

Prepare the tank farm facility according to the type of cargo (Pressurized or Refrigerated C3H6).

Ensure safe and smooth the receiving of propylene shipment and uphold good housekeeping within the tank farm area.

Coordinates with the Maintenance Department regarding repairs and work requests.

Ensure SAFETY FIRST at all times.

04/96 07/02

7 YEARS/ 3 MONTHS LIMAY GRINDING MILL CORPORATION / LBHTI

FIELD OPERATOR

Tasks:

Carried out effectively the start-up and shutdown procedures on cement manufacturing in accordance with written Standard Operating Procedure.

Monitors and operates regularly of process equipment and record hourly process parameters.

Maintain good housekeeping and observes safety and practice all the times.

Constant monitoring of operation on a shift basis including Centrifugal Pumps, Screw, Plant and Air Compressor, Fire Fighting Alarm System, Control Valves and Marine Unloading Arm.

Updating log sheet for proper recording of all necessary data on regular basis

Coordinates with the Maintenance Department regarding repairs and work requests.

Ensure SAFETY FIRST at all times.

06/93 03/96

2 YEARS/ 9 MONTHS NCDAVID CONSTRUCTION/

SAFETY OFFICER

Tasks:

Safety Policies: Developing and implementing safety policies helps employers reduce accident-related costs and prevent losses due to a decline in productivity. The safety officer determines what policies are needed and solicits input from managers and workers. Once a policy has been finalized, the safety officer alerts workers about the change and monitors compliance. He may also ask each employee to sign a statement acknowledging receipt of the information.

Workplace Inspections: Safety officers inspect interior and exterior work areas to determine if there are any safety hazards. During these inspections, a safety officer looks for broken equipment and damaged equipment, slip-and-fall hazards and other potential hazards. The officer also observes workers to ensure that they are wearing required personal protective equipment and following company safety policies. In the construction industry, safety officers check the stability of scaffolding, ensure that workers use hard hats and protective footwear, and check to make sure employees operate construction equipment in a safe manner.

Accident Investigations: When a workplace accident occurs, a safety officer conducts an investigation to determine why the accident happened. The officer may question witnesses, inspect the accident scene and take pictures of any property damage. Once the officer determines the cause of the accident, he writes a report detailing the cause and provides recommendations that can help prevent future accidents.

Training and coaching: include fire prevention plans, hazardous materials handling and machine guarding. Safety officers identify training needs, develop appropriate training programs and deliver training to employees. Also solicit feedback from workers and use that feedback to improve existing programs or create new ones.

03/90 06/93

3 YEARS/ 3 MONTHS NCDAVID CONSTRUCTION/

PURCHASER

Contact this candidate