Steve Norwood acxxlr@r.postjobfree.com Cell 602-***-**** Page 1 of 2

Significant Experience: 15,000 hours Pro E 2001 thru Creo 3, Modeling, Pro Sheet Metal,

Pro Piping, Pro Cabling and Top Down Design with Skeletons

Contracted to: GA-ASI (Predator B) Creo Parametric 3.0 Designer, Aug 2016 – Present

Windchill search assigned prototype drawings, parts. assemblies.

Create Work Space download files. Revise to Rev A & checkout.

• Make necessary changes to comply with production criteria.

• Incorporate any outstanding CN’s in Windchill Task Browser.

Check in files & upload files to Rev A share point for finally approval.

Utilizing Windchill 10.0 for file management. Adding company specifications and bom parts to WT parts.

Carlisle Interconnect Technologies Creo Parametric 2.0 Designer, Mar 2016 – July 2016

• Routing Harnesses using Pro Cabling utilizing copy geometry from electro/mechanical assemblies in aerospace industry to constrain connectors and components to skeletons.

Select components and spools (Cable, Coax, Fiber, Sleeving, Wire) from Electrical Components in PDM Link Windchill 9.0

Imbedding wire and cable info into harness through cable dialog box.

• Top Down Design using skeletons for part constrain and creation in assembly.

PDM Link Windchill 9.0

Simplified Reps for large assembly management.

Assembly drawings with automated bom’s.

Detailed drawings with GD&T.

Commscope Creo Parametric 3.0 Designer, Oct 2015 – Dec 2015

Top Down Design using skeletons for part constrain and creation in assembly.

Routed Harnesses using Pro Cabling utilizing copy geometry from mechanical assemblies for ref to constrain connectors and components to skeletons.

Caterpillar Creo Parametric 2.0 Designer, Nov 2014 – Oct 2015

Top Down Design using skeletons for part constrain and creation in assembly.

Routed Harnesses using Pro Cabling utilizing copy geometry from mechanical assemblies for ref to constrain connectors and components to skeletons.

Embedded Pro Diagram into Pro Cable.

Manufacturing module for Harness FP.

ELD (Electric Lines (Harness) Design

Part modeling, sheet metal, assemblies, drawing, harness & piping.

Simplified reps for large assembly management.

Team Center 10 for file management.

BAE Electronic Systems Creo Parametric 2.0 Designer, Sep 2014 – Nov 2014

Top Down Design using skeletons in for part constrain and creation in assembly.

Bom creation with 2-D repeat regions, rpt syms, automated balloons, and shown dimensions.

Routed Harnesses using Pro Cabling utilizing copy geometry from mechanical assemblies for ref to route harnesses.

Manufacturing module for Harness FP.

Simplified reps for large assembly management.

Use Windchill 10.0 for file management.

Coca Cola Freestyle Creo Parametric 2.0 Designer, Apr 2014 - Aug 2014,

Atlanta, Ga

• Working with Engineer’s to create, modify and document 3D models & 2D drawings for the Freestyle line of beverage machines.

Steve Norwood Page 2 of 2

(Continued) Operated PTC Creo 2.0 software and Windchill 10.0 PLM package to controlling Projects, documents, ECN’s, CT’s and Workspaces..

DRS Environmental Systems Inc Pro E WF4 Designer, Feb 2014 – Apr 2014

•Creating models, details assemblies with skeletons for defense program.

•Family tables, parametric BOM, 2-D repeat regions

•Annotations finish symbols, and GTOLS to produce engineering drawings use ASME Y14.5.

•Pro Cabling utilizing copy geometry from mechanical assemblies for ref to route harnesses.

•Simplified reps for large assembly management.

•Intralink 3.4 for file management.

Peerless Mfg Pro E WF5 Designer, Oct 2013 – Jan 2014

Creating mechanical engineering drawings in a production environment.

Utilization and modification of Pro/E assemblies, part models, family tables, 2-D repeat regions, parametric BOM balloons, and shown dimensions including. Annotations, finish symbols, and GTOLS to produce engineering drawings use ASME Y14.5.

Modeled and detailed machined and sheet metal parts.

File management system Windchill PDMLink 10.0

Sierra Nevada Corporation Creo Parametric 1.0 Designer, Feb 2012 – Sept 2012

Design partial engine assembly fixture that allows assembly to be raised, lowered and rotated so work can manipulated. Also modeled and detailed E/M Heater Bands that are attached to assembly to dry epoxies from tank. This assembly has Copper, Stainless Steel and Silicon sheets with heating pads sandwiched in-between. Pro Cabling involved providing heating pads with power.

Created mechanical engineering drawings in a production environment. Utilize shared copy Geometry in Harness Assembly for routing Pro Cable.

Utilization and modification of Pro/E assemblies, part models, sketches, family tables, 2-D repeat regions, parametric BOM balloons, and shown dimensions including. Annotations, finish symbols, and GTOLS to produce engineering drawings use ASME Y14.5.

Modeled and detailed cast, forged, and machined parts, piping and cabling. File management system

Intralink 3.4 & Windchill PDMLink 10.0

Carrier Pro E WF5 (Creo Elements) Designer, Nov 2011 – Dec 2011

Clipper Windpower Inc. Pro E WF4 & 5 (Creo Elements) Designer, April 2011 – June 2011.

Design One Inc. Pro E WF4 & 5 Designer, Jan 2010 – Mar 2011.

Pratt & Whitney Rocketdyne Pro E WF3 Designer Sept 2008-Feb 2009

BAE Land & Armaments, Mobility and Protection System’s Pro E WF3 Designer May 08-Sep08

General Dynamics, Woodbridge, VA Pro/E WF2 Designer Jan 08-Apr 08 Expeditionary Fighting Vehicle

NCSRT, Apex NC Pro/E WF2 Designer Aug 07 to Oct 07

General Dynamics, Ocala, FL Pro E WF2 Designer Jul 06-Nov 06

Mech Associates, Victoria, TX Pro E WF3 Designer Mar 06-Jun 06

General Dynamics, Scottsdale AZ Pro E WF2 Designer Oct 05-Feb 06

Siemen’s, Orlando, FL Pro E 2001 Designer Jan 05-July 05

EASI, St. Louis, MO PRO E 2001 Designer Aug 04-Nov 04

Professional Development & Education

Nimitz High School, Irving, TX Graduated 6/75

San Diego City College, S.D., CA, AA Degree Design / Drafting, Graduated 6/80

U.S. Army Trans School, Ft. Eustes, VA, Hélicoptèr Maintenance Certificate 4/82

Contact this candidate