CURRICULUM VITAE
ASHOKREDDY R
S/O MADHAVAREDDY R
POST KARUR
TALUKA SIRUGUPPA
DIST BELLARY EMAIL ID : acxx6e@r.postjobfree.com
583121 PHONE NO : 994-***-****
CAREER OBJECTIVE:
To get employed in a company, where I can work in a challenging environment,and I don't put my effort not only for interviews but also in my work with full of effort for the growth of the company.
EDUCATION QUALIFICATION:
B.E in INSTRUMENTATION TECHNOLOGY (2009-2013) from P.D.A.C.E. Gulbarga with CGPA CGPA 7.94 aggregate (71.9%).
II PUC : Board of Karnataka Education 73.83% aggregate.
S.S.L.C from Karnataka board with 84.48%
TECHNICAL CERTIFICATION
COMPANY : TECHSHORE INSPECTION SERVICES
STATUS : DIPLOMO IN OIL AND GAS TECHNICIAN
DURATION :06 MONTHS
TOTAL EXPERIANCE : 3 YEARS
TYPE OF WORK
1.Well head operation and maintainance
2. Separator operation and maintainance
3. Knowledge of Exploration
4. Knowledge of types of well heads primary,secondary and tertiary
5. Knowledge of operation of
* Beam pump
* ESP(electric submersible pump)
* PCP(progressive cavity pump)
* GAS LIFT
* ENHANCED OIL RECOVERY (Co2 lift)
* THERMAL RECOVERY
* CHEMICAL FLOODING
6. KNOWLEDGE OF MANIFOLD
7.KNOWLEDGE OF STATIC EQUIPMENTS
* FIXED ROOF TANKS OPERATION
* FLOATING TANK OPERATION
8.KNOWLEDGE OF TRAYS AND COLUMNS
9.KNOWLEDGE OF ROTATING EQUIPMENTS
* . KNOWLEDGE OF PIG (PIPE INTERNAL GAUGING)
* INTELLIGENT PIG OPERATION FROM STARTING TO END OF OPERATION
* ALL PUMPS /COMPRESSOR OPERATION AND MAINTAINANCE
1.CENTRIFUGAL PUMP AND COMPRESSOR
2. RECIPROCATING PUMP AND COMPRESSOR
3. PISTON PUMP
10. KNOWLEDGE ON VALVES
* BALL VALVES
* BUTTERFLY VALVES
* NON RETURN /CHECH VALVES
* CHOKE VALVES
* PILOT VALVE AND RUPTURE DISC
* PNEUMATIC VALVE
* NEEDLE VALVE
11.KNOWLEDGE OF HYDROCARBON COMPOSITION AND CHEMICAL REACTIONS
KNOWLEDGE OF
* TRUE VAPOUR PRESSURE
* POUR POINT
* DEW POINT
* FLASH POINT
* API GRAVITY
* CRUDE OIL FRACTIONAL DISTILLATION
* CORROSION, EMULSION .
* LEL AND HEL
12. GAS EXTRACTION AND SWWETENING KNOWLEDGE OF
* AMINE SWEETENING SYSTEM
* GLYCOL DEHYDRATION SYSTEM
13. KNOWLEDGE OF INSTRUMENTATION
* KNOWLEDGE OF PROCESS VARIABLES
PRESSURE, TEMPERATURE, LEVEL, FLOW, VIBRATION,SPEED
* THERMOWELL
MAINTAINANCE AND CALIBRATION OF
1.THERMOCOUPLE
2. RTD
3. PYROMETER
4. PRESSURE TRANSMITTER
5 .FLOW TRANSMITTER
6. LEVEL TRANSMITTER
7. DENSITY TRANSMITTER
8. VIBRATION TRANSMITTER
9. SOLENOID VLAVES
PROGRAMMING KNOWLEDGE
PLC AND DCS PROGRAMMING AS MENTIONED BELOW
have completed my 3 months training in Industrial Automation i.e..
Post Graduate Diploma in Industrial Automation (PGDIA) from Prolific Systems and Technologies Pvt. Ltd., Bangalore which includes:
PLC’s - Allen Bradley (Micrologix, SLC 500 Series)
Siemens (S7-200&S7-300)
Mitsubishi
Omron
GE-Fanuc
SCADA - Wonder ware (In touch version 9.5),
Siemens (Win CC Version 7.0)
Drives - ABB ACS 150
DCS - ABB AC 800F
Instrumentation
Work experience:
Company : M/s Janki Corporation limited, Bellary.
Department : Instrumentation
Job Designation : Assistant Engineer
Experience : Working as Senior INCHARGE PLC and DCS programmer and Field
Instrumentation Engineer since JANUARY 2014 TO JUNE 2016
Key responsibilities
Preparation of IO list.
Checking of all DI’S, DO’S, AI’S & AO’S.
Soft ware installation.
Redundancy checking.
Worked on Function block libraries.
Worked on graphics libraries.
Worked on hardware libraries.
Tags assigning and linking with program.
Implementation of logics for all the equipment as per the process.
Any hardware configuration changes in the panels.
Interfaced profibus communication between SIEMENES PLC and ABB DCS
I have designed SCADA pages, implemented various interlocks in plant.
I) Alarms creation
ii) Trends creation for process parameters
iii) Events creation.
Forcing or changing the analog parameters.
SOFTWARE TECHNICAL SKILLS.
1.ABB AC800F FREELANCE(ALL VERSION).
2.C,C++ & SQL(AS BACKGROUND VARIABLE).
3.FBD PROGRAMMING.
4.LADDER PROGRAMMING.
5.COMPACT HMI 800F.
HARDWARE EFFICIENCY
1. ABB AC800F FREELANCE CONTROLLER ERECTION AND DOWNLOADING PROGRAM FOR IT.
2. S800 I/O MODULES.
3.ABB VFD.
PROTOCOL
Rs 485 in profibus and rs232, rs422 and rs485 in modus
IN IORN ORE FINES BENEFICATION AND PELLET PLANT.
IN IOFBP Working & Programming with ABB DCS which works with following features .
1.Programming software: CONTROLLER BUILDER AC800F
2.Runtime software: DIGVIS
3. Version :9.2
4.Power supply Module type :SD812F
5.Ethernet module type :EI813F
6.Profibus module type :FI830F
7.Serial inter face module type: FI820F
ACHIEVE MENTS IN DCS
1.Written program for CVDF(CERAMIC VACCUM DISC FILTER) as per process condition to operate it in automatic mode & created new GRAPHICS page for it.
2.Written program for calculating the Average shit value of DT(DENSITY TRANSMITTER) for minimum setpoint of 1.0 kg/cm2.
3.Attened all the problems that occurred and solved them and made interlocks wherever its necessary.
IN PELLET PLANT Working & Programming with SIEMENS which have following features .
1.TYPE :S7-400,VERSION 5.1
2. Programming software : SIMATIC MANAGER
3.Runtime software : WINCC EXPLORRER
ACHIEVE MENTS IN SIEMENS
* Written logic for GRAVMETRIC SETPOINTS for WEIGH FEEDERS with own
calculations.
* Created logic for the TG (TRAVELLING GRATE) to run in auto mode successfully.
Projects completed:
3.2 Ø Two Stage Gaisifier Coal Gas Plant:
Erection, commissioning of Pressure, Level transmitters, RTD & Thermocouples
Termination wiring of VFD’s Schneider altivar-31 of different motor ratings.
PERSONAL SKILLS:
Excellent verbal and ability to deal with people diplomatically, willingness to learn team facilitator hard worker and Also quick learner, hard worker, desire to work in a team.
PERSONAL PROFILE:
NAME : ASHOKREDDY.R
FATHER’S NAME : MADHAVAREDDY.R
NATIONALITY : INDIAN
DATE OF BIRTH : 20 JUNE 1991
LANGUAGES KNOWN : ENGLISH,HINDI,KANNADA,TELUGU
MARITAL STATUS : SINGLE
Declaration: I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars. ASHOKREDDY.R