Electrical Engineer

SUMMARY

Twenty years of diversified experience in operation, management and engineering, design offshore power generation & distribution systems for production TLP, Hull, SPAR and FPSO, Drilling Jack-up Rig & LPG FPSO, design, fabrication and system integration test for subsea control system, subsea umbilical, Turret & BOP Controls System, and onshore pre-feed for transmission substation. Experience includes operations, construction, maintenance, commissioning and project engineering in upstream, midstream, downstream based on industry standards such as ABS, NEMA, ANSI, ASTM, ASME, NETA, DNV, SOLAS, CFR, GOST, NACE, API & IEC. Proactive interface management HSE culture. (Valid BOSIET & HUET Certificate)

PROFESSIONAL EXPERIENCE

WKD Company, HOUSTON, TEXAS. 10/2015 – At-Present

WKD provides operations, design, construction and commissioning services for offshore oil & gas platforms topside, subsea and onshore commercial facilities.

Lead I/E Specialist (Contractor)

Performed electrical inspection and field survey for Mabee gas compressor station field (midstream).

Prepared conceptual feed study and calculations for Mabee gas compressor station field to provide backup Solar power for critical loads, using solar panel & micro-inverters systems.

Executed feed study for offshore Pemex-Akal-platform power generation and distribution, equipment sizing such as PWR generator, MV Transformers, UPS, MV/LV SWGR and fault calculation, cable sizing and tray routing and motor control centers.

Upgraded offshore Penn State oil & gas production platform Subsea Production Control well interlocks & Shutdowns, Cause & Effect Chart & Subsea Tree Diagram and commented operations installation procedures.

Commented Conger brownfield I/E DWG’s and controls systems, CTR’s, procurement, cost estimates, planning schedules, technical bid evaluations, Data sheets for SWGR, MV XFMR, UPS, MCS, HVAC, F&G system & subsea tree packages.

Verified JSA & LOTO procedures and issued Hot work permits & assisted commissioning team implementing startup.

Root cause failure analysis for gas flotation Cell skid, flare boom ignition system, glycol flow meters and P&ID markups.

Supported big capital projects and assisted writing maintenance, startup & operations manuals and procedures.

Wood Group PSN, Houston, Texas 05/2014 – 09/2015

Operation services, management & engineering of offshore oil & gas production operations and services.

Principal I/E Engineer, Gulf of Mexico (Represent Hess Corp)

Upgraded offshore Baldpate oil & gas production platform F&G system, redundant SIS PLC system, E. Gen auto load /Sync, MV lightning surge suppression system, control & pneumatic valves, pressure & flow Transmitters, Wells Wireless Pressure Transmitters, air compressor system and assessed process packages safety integrity levels and root cause failure (upstream).

Supported GOM offshore operations for production reliability, well pipeline integrity and HAZOP implementation.

Performed brownfield Electrical/Instrumentation and controls design, procurement, construction, commissioning & hot permits.

Performed Arc flash study and relay protection setting to reduce incident energy levels and clearing time to reduce safety risk.

Performed Startup & Commissioning for Corrosion Inhibitor pump, Turbine power Generator, E.D. Generator and SWGR.

Managed offshore I/E equipment Inspection in Hazard Area, maintenance documentation with SAP, cost budgeting & planning.

Contributed in Energy Isolation Kaizen and removal of ESD/F&G inhibits and overrides based on Bow & Tie study.

Reviewed Subsea Production Control Well Interlocks & Shutdowns, Cause & Effect Chart & Subsea Tree Diagram.

Provided project functional governance, cost estimates, planning, scheduling, engineering & construction man hours.

ExxonMobil, COMPANY, Houston, Texas 08/2012 – 9/2013

Operation services, management & engineering of offshore oil & gas production operations

Project Electrical Engineer (Contract thru NES Global)

Managed electrical offshore Brownfield design & construction for Kizomba B & C FPSO in Angola, block-15 Per DNV & ABS (upstream).

Managed electrical design for LER Modules, MV XFMRS & power turbine Generators, multi-phase gas compressors, MV motor pumps for gas compressor expansion station for Chayvo, GIC & Odoptu-II projects in Sakhalin, Arctic Russia (midstream).

Assisted design of modular approach for Chayvo Onshore Processing Facility with oil & gas separation process and with capacity of approx. 250,000 barrels of oil and 800 million cubic feet of gas per day exported a distance of 25 km from the shore.

Performed design conformance for subsea umbilical from Bavuca & Kakocha wells to KIZ-B to existing drilling centers.

Modified & added for KIZ-B&C FPSO, UPS, TUTA, MCS, EPU, HVAC, 250 HP methanol pump, subsea umbilical &Turret.

Reviewed and approved technical bid evaluations for UPS, MCS, HVAC, 250 HP methanol pump and subsea umbilical packages.

Verified relay coordination, dynamic stability, fault & load flow studies & construction material for KIZ-B & Odoptu-II projects.

Witnessed MCC, UPS FAT & provided punch list & added special testing tools & specification into commissioning procedures.

Brownfield design, procurement, construction, installation using Microstation 3D CAD & Navistar 3D modeling viewer for FPSO cable tray routing and installation in compliance with HSE and ExxonMobil specifications design and installation guidelines.

Assisted commissioning team to implement the brownfield electrical philosophy changes into the commissioning procedures.

Wrote startup procedures for SWGR, UPS & MCC systems based on ARC Flash study & PPE requirements for safe execution.

Chevron COmpany, Houston, Texas 05/2010 – 09/2012

Operation services, management & engineering of offshore oil & gas production operations and services.

Lead Electrical Engineer(Contract thru Swift)

Brownfield expansion for onshore power distribution semi substation 12.4KV / 2.4KV for Dollarhide natural gas compressor Injection station in Midland, TX & Shivers CO2 Compressor Inj & Natural Gas pipeline Compression stations in Carthage, TX.

Interfaced with Rusk Utility Companies to install electric poles and transmission lines and power transformers to feed Shivers station 14.4KV reclosers, 12.4KV/480VAC power transformer, switchgear, MCC, auto reclosers, poles and surge arresters.

Performed equipment inspection & electrical field survey, wrote & performed electrical system start-up procedures (midstream).

Prepared technical bid evaluation sheets for Reciprocating Compressor with 3000HP induction motor (WPII).

Supervised maintenance team for electrical repairs, commented on maintenance report & enforced H2S safety procedures.

Integrated brownfield design system to existing power management load shedding system and updated commissioning procedure.

Verified JSA & LOTO procedures & assisted commissioning team implementing startup & energized testing in brownfield mode.

Provided onsite leadership for safe execution of startup & turnover electrical systems, including inspection checks & loop testing.

$5 Billion big capital project “SNX” fixed platform in Angola (upstream).

Supported Brownfield design of Lomba Subsea Power Cable Umbilical to N. Nemba platform per ISO 13628-5 & IEC60502-01.

Managed design of PWR generation 20Mw, Switchgear BLDG & equipment, Diesel &Turbine Gen, power load shedding system.

Signed off over 400 EPC design drawings & vendor DWG packages in Detail Engineering Phase (1-4) for SNX & SNA.

Executed SNX & SNA design, procurement, FAT & Construction, MOC, HAZOP based on Navistar 3D model.

Assisted SNA project with the Chevron - Daewoo commercial bidding contracts verification and technical requirements changes.

Commented and approved technical bid evaluations for all electrical systems based on Chevron technical specifications.

Reviewed & complied with Chevron General and Safety In-Design Specification for SNX & SNA fixed platform design.

Traveled & managed DSME construction in Okpo, S. Korea & attended generator & SWGR F.A.T & package inspections.

Assisted commissioning team in writing electrical startup & safe execution procedure for generator, switchgear, MCC & XFMR.

Participated in Green & Brownfield construction, installation & FAT schedule planning & oversight for overall electrical system completion, implementing lesson learned from past Chevron projects to meet commissioning & startup schedule on time.

Performed ETAP stability, flow, Arc flash and fault studies verification & Sign off & Assisted Cathodic protection design.

JAPAN DRILLING COMPANY/Exmar, TOKYO, JAPAN. 08/2009 – 01/2010

Drilling operation services of Offshore Drilling Rigs, Semi-submersibles, & Ships for Drilling, & storage.

Senior Electrical Engineer (Contract thru Exmar)

Performed F.A.T & pre-commission for facility drilling “Sagadril II” Jack Up in Beaumont, TX before shipped to U.A.E.

Provided punch list for initial system completion acceptance process for safe execution for the final system completion.

Provided onsite leadership in insuring safe execution of pre-commissioning for the electrical drilling & power systems.

Calculated & sized Mud pumps, Top drive and Draw Works motors for Sagadril II facility drilling electrical system.

Verified SCR & VFD design drawings, load flow, short & Harmonics analysis using EDSA for Sagadril II Jack Up.

TECHNIP USA, HOUSTON, TX. 02/2008 – 04/2009

Technip provides engineering and construction services for offshore and onshore oil & gas industries.

Senior Electrical Specialist (Offshore/Onshore Production Topside Power Distribution System/Subsea Umbilical)

Lead engineer for gap period after feed study phase II for S’ND & SAUX fixed platforms (Chevron project) (upstream).

Performed bid packages for switchgear building, Generator, Gas Compressor, and uninterruptible power supplies.

Designed Power Center Building for “Valero Port Arthur Refinery” Project including switchgear/Motor Control Center Equip (downstream).

Created Cost-Time-Resources estimate & time schedule for Sanha Aux & South N’Dola projects design phase.

Sized power generator and created switchgear, motor control center, transformer and generator bid tabs and quotations.

Reviewed subsea umbilical spec for SAUX project per API 17E & verified V. Drop, Skin Effect & Charging Current Calc.

Mustang Wood group Engineering, Houston, TX 10/2002 – 02/2008

Alliance Engineering provides engineering, procurement and construction management services & commissioning.

Senior Electrical Engineer (Offshore/Onshore Production Topside Power Distribution System)

Feed to Detail Design phase for offshore electrical power generation system design for FPSO & offshore production platforms projects such as Sanha LPG FPSO (downstream), Frade FPSO, Magnolia (Conoco), Oveng / Okume (Hess), Kikeh (Petronas) & Perdido (Shell-upstream).

Assisted construction, pre-commissioning & start-up, PTW/LOTO for Magnolia (TLP) Project, Conoco Phillips in Ingleside, Texas.

Provided onsite assistance for startup & turnover of electrical systems, inspection checks, point to point termination check.

Created Interconnect and One Line Diagram for MV/ LV switchgear, motor control center, emergency generator and TLP hull.

Performed electrical Fault, Transient Stability, Load Flow Study using ETAP, cable tray sizing and breaker interlock philosophy.

Developed bid packages for UPS, 24/125VDC Chargers, 4160/480VAC MV L-Transformer, SWGR & BLDG, MCC, D. Generator, T. Generators, MV motor soft starter, heat tracing, PAGA, Nav-aids, Cathodic Protection lightning surge arrester.

Verification for Sanha LPG FPSO (Downstream) electrical design and equipment short circuit and FLA rating for future process expansion.

Performed F.A.T & inspection for MV MCC & SWGR, LV SWGR, VFD, UPS, XFMR, Diesel/Turbine generator, and LV MCC.

Pre-feed brownfield design 138 KV utility transmission lines for transmission substation including switching, controlling, step-down power transformer to sub transmission feeders with surge arresters, power circuit breakers and bypass disconnect switches.

Sized substation current transformers with multi-ratio bushing type for relaying and metering schemes.

Added manual operated grounding switches for substation maintenance & out-of-service periods with interlocks schemes.

Used voltage transformers with substation circuit & equipment protection, synchronization, & metering schemes.

Aker Solutions, Houston, TX. 12/2000 – 09/2002

Provider of Production of Oil & Gas Service and equipment to control pressures and direct flows at subsea wells.

Senior Subsea Controls Engineer

Conceptual Design subsea electrical production control system, including, Umbilical design, Subsea Wellhead and Christmas Tree for Mariner-K. Kong, Shell-Mensa & Samedan L. Ark projects based on API 17A/D/E/F/G.

Programmed PLC (Rslogix-5, 500 & 5000 A-B) to control chemical injection & HPU skids, flow meters & totalizers.

Designed & Manufactured MCS, SCM & SEM, HPU, created and performed commissioning and pre-deployment test procedures.

Supported installation of production subsea control system, umbilical installation, electrical flying leads, Jumpers, umbilical. termination heads & electric manifold & pre-tested electrical cables/electro/hydraulic/chemical Inj tubes in the umbilical system.

Cameron Controls, Inc., Houston, TX. 01/1999 – 12/2000

World-leading provider of wellhead, drilling, and production of oil and gas service.

Subsea Controls Engineer

Designed, specified & manufactured production subsea control system including MCS, SCM, SEM, EPU, HPU, TUTA, Umbilical, SDU, Manifold, UTA, flying leads, test plates and Well Trees for Triton Ceiba project based on API-17D/E/F.

Developed subsea umbilical FAT, SIT & Installation procedure & performed PWR V. drop & Comm signal attenuation dB study.

Performed production subsea system FAT, SIT, pre-commissioning & umbilical pre-load-out test, installation, test, and repair.

HYDRIL GE OIL & GAS COMPANY, HOUSTON, TX 10/1996 - 10/1998

World leading manufacturer and supplier of premium tubular connections for casing and tubing, high torque tool joints, blowout preventers, diverters, pressure control systems, drill stem valves and actuators, subsea drilling systems, high performance chokes and oilfield and custom rubber products.

Junior Drilling Controls Engineer

Assisted brownfield design of drilling and BOP preventer control system for six Transocean FPSOs.

Designed and manufactured ESD, Tool-pusher and Drillers control panels and issued schematics drawings.

Implemented drilling safety cause and effect guide lines to control design and complied with area classifications.

Performed in house drilling system FAT and SIT for customer approval system sign off.

EDUCATION: B.S. Electronics Engineering Technology, University of Dayton, Dayton, Ohio 12/ 1995

Contact this candidate