Mechanical Engineer

JESSE TEMORES, P.E.

Chicago, IL, Cell Phone: 312-***-****, E-mail: *********@***.***

JOB OBJECTIVE

An engineering or management position that will challenge and enhance my experience, knowledge, and skills.

EMPLOYMENT INFORMATION

03/17 to 10/17 Sr. Analytical Engineer (Contractor) Incobrasa Industries (Biodiesel Producer), Gilman, IL

Analyzed large industrial mechanisms and structural assemblies. Operated Inventor Professional 2017, AutoCAD Mechanical 2017, SpaceClaim 18.1, and Ansys 18.1. Performed FEA stress, thermal, buckling, modal, & dynamic motion simulation analysis. Components analyzed include: mechanisms, sheet metals, structural, & machined components.

01/17 to 02/17 Sr. Project Engineer (Contractor) Kulicke & Soffa Industries, Santa Ana, CA

Designed electronic packaging equipment for the semiconductor industry. Operated NX 9 (Unigraphics), Pro/E Wildfire 4.0, Pro/E Mechanica, & Minitab 17. Utilized Matrix 10 & Teamcenter 10. Design work includes: high speed and high precision robotic components with motions in the X, Y, and Z axis directions.

06/15 to 07/16 Sr. Project Engineer (Contractor) Rolls-Royce Corporation, Indianapolis, IN

Designed turbomachinery engine components for civil and military aircrafts. Operated NX 9 (Unigraphics), Ansys 14, & Minitab 17. Utilized FMECA & Teamcenter 10. Performed FEA stress, thermal, modal, harmonic response, forced vibration, and fatigue analysis. Design work includes: FAA compliant structures, casted, forged, & machined (GD&T) components.

11/14 to 01/15 Sr. Analytical Engineer (Contractor) Fairbanks Morse Engine, Beloit, WI

Analyzed large industrial piston engines for use in nuclear power plants as a backup power source. Operated SolidWorks Premium 2014 and Mathcad Prime 3.0. Performed stress, thermal, modal, & seismic vibration analysis. Components analyzed include: pressure vessels, sheet metals, structural, & machined components.

08/12 to 05/14 Sr. Project Engineer (Contractor) Rolls-Royce Corporation, Indianapolis, IN

Designed turbomachinery engine components for civil and military aircrafts. Also, designed utility power generator components. Operated NX 7.5 (Unigraphics), Ansys 14, Matlab R2013, & Vanguard Studio. Utilized DFMEA, SAP, & Teamcenter 8. Performed FEA stress, thermal, modal, harmonic response, & forced vibration analysis. Design work includes: FAA compliant structures, casted, forged, & machined (GD&T) components.

10/10 to 08/12 Sr. Project Engineer (Contractor) General Electric (Renewable Energy Headquarters), Schenectady, NY

Designed solar panel systems. Operated Inventor 2010, AutoCAD 2010, MathCAD 14, & Ansys 12. Performed FEA stress, buckling, & modal analysis. Utilized CFX 12 and Fluent 12 for computational fluid dynamic (CFD) analysis. Design work includes: ASCE compliant structures, machined (GD&T) components, custom extruded metals, & custom rolled form metals.

07/10 to 09/10 Sr. Project Engineer (Contractor) Idaho National Laboratory, Idaho Falls, ID

Designed nuclear energy grade equipment. Created engineering documents for the U.S. Department of Energy. Operated Inventor 2010, AutoCAD 2010, & Ansys. Performed stress analysis. Design work includes: High pressure & high temperature vessels, structural, & machined (GD&T) components.

01/10 to 07/10 Sr. Project Engineer (Contractor) Parker Hannifin Corporation, Machesney Park, IL

Designed accumulators for use in military, earth moving, & refuse vehicles. Operated Inventor 2010, AutoCAD 2010, Ansys 12.0, & AMESim 8.1. Utilized DFMEA, MSS, & Lotus Notes 6.5. Performed stress & high cycle fatigue analysis. Design work includes: ASME compliant high pressure vessels, hydraulic & pneumatic systems, piston & bladder cylinder systems, structural, machined (GD&T), & sheet metal components.

09/05 to 10/08 Sr. Project Engineer Lechler Inc., St. Charles, IL

Project manager of atomization & spray nozzle systems for use in industries that include: power plants, food, pharmaceutical, paper, agricultural, & metallurgical. Lead engineers, drafters, & shop personnel in the design, fabrication, inspection, testing, & installation of pressure vessel systems. Visited customers & vendors. Operated AutoCAD 2007, Inventor 11, Pro/E Wildfire 4.0, Pro/E Mechanica, & Ansys. Performed stress, cooling, & heat load analysis. Utilized Productstream & FEPA 4GL. ISO 9001 compliant. Design work includes: ASME & AWS compliant high pressure vessels, valves, plastic prototyping, hydraulic & pneumatic systems, structural, machined (GD&T), & sheet metal components.

02/05 to 06/05 Sr. Project Engineer Thomas Engineering Inc., Hoffman Estates, IL

Designed automated pharmaceutical equipment. Operated AutoCAD 2002, Inventor 9, and Algor 17 (FEA). Finite Element Analysis includes: linear & nonlinear stresses, static & dynamic stresses, buckling, mechanical vibration, computational fluid dynamics (CFD), and heat transfer. FDA and GMP compliant. Utilized AS400 & MS Office. Design work includes: tablet coating equipment, rotating mechanisms, pneumatic & HVAC systems, atomization & spray, structural, machined (GD&T), sheet metal, & perforated components.

02/03 to 01/05 Project Engineer Oshkosh Specialty Vehicles, Harvey, IL

Designed mobile medical trailers equipped with CT, PET, MRI, mammography, cardiac catheterization, and lithotripsy systems. Managed projects from inception to completion. Operated AutoCAD 2002, Mechanical Desktop 6, Inventor 6, MathCAD 11, Block Load 3, Ansys 7.1, NE Nastran 8.2, and Algor 15. Performed stress, cooling, & heat load analysis. Developed engineering standards. ISO 9001 compliant. Utilized MS Office. Design work includes: HVAC systems, structural, machined (GD&T), and sheet metal components.

02/00 to 12/02 Project Engineer Northern Indiana Commuter Transportation District, Michigan City, IN

Designed passenger rail car equipment. Team leader of projects. Operated AutoCAD 2000. Developed engineering standards & procedures. Performed stress analysis and fluid flow analysis. Trained team members. Implemented safety standards. Utilized MS Office. Design work includes: DC to AC propulsion conversion, air brake modifications, HVAC modifications, hydraulic & pneumatic systems, structural, machined (GD&T), and sheet metal components.

02/99 to 02/00 Mechanical Design Engineer Atlas Material Testing Solutions, Chicago, IL

Designed material testing equipment. Project Manager of products. Operated AutoCAD R14 & Mechanical Desktop 3. Utilized MFG PRO, MS Project, & MS Office. ISO 9000 compliant. Project Managing includes overseeing: mechanical & electrical design, purchasing, & manufacturing. Design work includes: simulated weather chambers, polymer, textile, & fire testing equipment, sheet metal & machined (GD&T) components, and hydraulic & pneumatic systems.

07/96 to 02/99 Mechanical Design Engineer Whiting Corporation, Monee, IL

Designed metallurgical, crane, & railroad service equipment. Operated AutoCAD R13 & Pro/E R18. Performed stress analysis. Design work includes: furnaces, transfer cars, ladles, car hoists, drop tables, portable jacks, overhead cranes, & hydraulic systems.

06/95 to 07/96 Mechanical Engineer Ability Engineering Technology, South Holland, IL

Operated AutoCAD R12. Fabricated ASME compliant pressure vessels for use in vacuum, pneumatic, hydraulic, & cryogenic systems. Assembled, soldered, brazed, & tested industrial devices. Operated wide variety of machining and manufacturing tools.

EDUCATION

Master of Science, Aeronautical & Astronautical Engineering, Purdue University, West Lafayette, IN, 1994

Bachelor of Science, Aeronautical & Astronautical Engineering, Purdue University, West Lafayette, IN, 1992

Significant courses: Turbomachinery, Thermodynamics, Fluid Mechanics, Heat Transfer, Chemistry, Compressible Gases,

Electromagnetics, Electrical Circuit Analysis, Control Systems, Dynamics & Vibration, Structural Analysis, Aerodynamics,

Combustion, Atomization & Spray, Nuclear Fission & Fusion, Fortran, Propulsion, Advanced Calculus, Economics

CERTIFICATES/SKILLS

Professional Engineer License, Mechanical Engineering, States of Illinois & Indiana, January, 2003

Inventor Level 1 and Level 2 Courses, Hagerman & Company Inc., 2007

Algor 14 (FEA) Introduction Course, Algor Inc., October, 2003

Pro/E R20 Introduction and Fundamentals of Drawing Courses, Parametric Technology Corp., 1998

Trilingual (English, Spanish, & Portuguese)

Contact this candidate