WILFREDO PESANTE CHST

Email: acxbd7@r.postjobfree.com

Cell: 646-***-****

Qualifications: Proficient in UEPA, OSHA 1926/1910, NYC DOB, FDNY fire safety, NFPA codes and NYCT 1S regulations. Competent and knowledgeable of heavy equipment safety and developing and executing on a wide range of environmental and safety solutions, including engineering in project control functions and data collection, research and reports.

Certifications Include:

BCSP: Construction Health and Safety technician (since 1/2015

OSHA: 30 Hour Certified, 32 Hour Scaffold Erector Training (since 2008)

DOB: 40 Site Safety Manager Hour Training (current as of 3/2015)

NYCT MTA: Track Training (since 1998)

FDNY: Construction Fire Safety Manager (since 2/2012)

SSPC: C-3 Supervisor/Competent Person for de-leading of Industrial Structures

NYS DOL: Asbestos Inspector (licensed since 1985)

ASSE: Member (since 2009)

Employment History:

Currently: Safety Dynamics LLC. 335 Calyer Street Brooklyn N.Y.

Position: Safety Engineer/Safety Supervisor

Duties: Over seeing all aspects of construction safety associated with the following MTA projects:

Contract 43749 - Elevator, Roofing & Façade Upgrade, Perimeter Protection & War Memorial Relocation at 130 Livingston St. in the Borough of Brooklyn (Contractor Lanmark Group Inc.)

Contract A-35994/A-36086 Smith & 9th & 4th Avenue & 10 Street station rehabilitation (Contractor F&S/CFS)

Contract C-42000 Culver Line Viaduct, Phase III (Contractor Fox Industries)

Develop site specific plans by detailing hazards and corrective measures in order to ensure foreseeable hazards are addressed.

Establish for compliance with the site specific plans with contractors and sub- contractors using appropriate communication procedures in order to prevent accidents.

Ensure Safe Work Plans (SWP) adhere to OSHA 1926, NYC DOB chapter 33 and NYCT 1S safety specifications in corporation with contractor and sub-contractors in order to ensure foreseeable hazards are identified and addressed.

Perform work site assessments in accordance with specific plans using walk-throughs in order to verify compliance and identify hazards and potential hazards on the work site.

Conduct safety meetings and daily tool box talks and records readily available for review

Provide daily safety logs to on site Project Manager

Maintain Safety Data Sheets and list of hazardous chemical

Conduct new employee orientation, review contractors Accident Prevention Program & Hazardous Communication Program including the new Globally Harmonizing System

Review Emergency Response Procedures and conduct Emergency Evacuation drills

Maintain records of contractor employees training records and schedule training as needed

Inspect workers certifications and provide training when required & provide hot work permits as needed for hot work activities

Ensure Track Safety regulations are adhered to and MTA flagging is in place prior to allowing track access and coordinating with NYCT MTA during G.O.s and work train activities

Ensuring MPT set-up is installed and maintain as per NYC DOT regulations

Over seeing scaffold erecting projects above 40 feet, inspecting daily and maintaining records

Industry Safety LLC (353 Randall Avenue, Bronx N.Y.)

Position: Contractor Safety Engineer 2012 - 2015

Duties: Overseeing the safety of all aspects of construction work associated with the following MTA projects

Rockaway Flats Emergency Repair, (Contractor TC Electric/J-Track)

Dyre Ave Signal System Modernization in the Borough of the Bronx (Contractor JTJ Contracting)

Developing site specific safety plans by detailing hazards and corrective actions in order to ensure that foreseeable hazards are addressed along the Right of Way

Ensure that the Safe Work Plans adhere to OSHA 1926, 1910, NYC DOB Chapter 33 & NYCT 1S Safety Specifications in corporation with contractors and sub-contractors in order to ensure that foreseeable hazards are identified and addressed working on the Right of Way on track

Performing work site assessments on heavy equipment in accordance with site specific plans using a walkthrough and inspections in order to verify compliance and identify hazards and potential hazards on the work site

Conduct weekly safety meetings and tool box talks

Conducted emergency evacuation drills

Inspect workers PPE on a daily and ensure workers utilizing the proper PPE as per work activities

Conduct accident/incident investigations and distribute to GC and MTA CPM safety division

Review contractor material MSDS and maintain records on site for review with workers as required

Ensure Track safety regulations are adhered to and MTA flagging is in place prior to allowing workers track access and coordinating with MTA during G.O.s and work train activities

Over seeing the construction of several buildings ranging from 3 to 12 story buildings from the ground up on the street and along the Right of Way of the NYCT subway system at Dyre Avenue project

2008 – 2009 & from 6/12 - 12/12

Creative Environmental Solutions (1 Penn Plaza, New York, NY)

Contractor Safety Engineer

Over-seeing safety of all aspects of construction work associated with the following MTA projects, Over-coat Painting of the Elevated Structure from Alabama Station to Cypress Hill Station Jamaica Line in the Borough of Brooklyn & Facility Roof Repair & Replacement at 7 Locations in the Boroughs of Brooklyn

Conduct bi-weekly safety meetings and tool box talks

Provided daily safety reports to on site project manager

Verified that all construction equipment operators licenses are valid and current

Conducted emergency evacuation drills

Provided safe work plans for MTA projects

Inspect workers PPE on a daily basis

Fill out and review all accident reports before submitting

Conduct safety orientation for workers prior to start work

2007 - 2008

Warren & Panzer Engineering (228 East 45 street, New York, N.Y.)

EH&S Representative and Field Engineer

Conduct inspections and AHERA re-inspections within the NYC and Westchester County school systems and private corporations within the NYC area.

Reviewed and advise on contractors’ work procedures and specifications.

Coordinate and supervise asbestos contractor work activities.

Create asbestos abatement designs.

Insure workers are utilizing proper abatement containment, removal methods and procedures.

Troubleshoot problems on work sites and attending weekly meetings with clients to discuss scheduling, work progress and resolutions of specific special field issues.

2002 – 2007

Stone & Webster/SHAW E and I (1 Penn Plaza, New York, N.Y.) 212-***-****

EH&S Representative, Lead & Asbestos Inspector and Field Engineer

Environmental specialist on lead and asbestos projects within New York City Transit (NYCT)

Review and advise on contractor work specifications.

Coordinate and supervise asbestos and lead contractor work activities.

Create asbestos abatement designs and conduct safety audits on lead and asbestos projects.

Ensure workers are utilizing proper abatement containment, removal methods and procedures.

Provide daily logs of work activities and inspection of Hazard Waste Storage Areas on lead projects ensuring proper documentations and monitoring lead abatement workers PPE usage.

Managed the demolition of the Hudson Oil Refinery in Cushing Oklahoma incorporation with the United States Army Corp of Engineers and the Oklahoma EPA/DOL

BEM Systems Inc. from 1998–2002 (Chatham, N.J.)

Project Monitor and Field Manager

Checked the integrity of decontamination units and critical barriers.

Maintained records of field conditions and events taking place during asbestos removal projects.

Inspected the projects work areas to ensure code compliance.

Inspector

Visual assessments of asbestos containing materials at various NYCT properties, collecting samples using AHAERA sampling protocols.

Identified and quantified ACM along with NYCT department of OSS and EED project managers.

As an on site consultant at the NYCT central

Prepared consultant designs, NYS-SSV applications and drawings for bidding and prepared contractor cost estimate and NYCT WAR request. office conducted drafting, managed contractor/consultant contracts and work specifications.

Special Skills

Fluent in Spanish, sharp, innovative and quick to adapt.

Maintains sense of humor.

Computer literate. (Microsoft Word, Excel and Power Point)

Advanced Training and Education

Leighton Associates

Safety Dynamics, LLC

Member of the America Society of Safety Engineers (ASSE)

Ando International

Board Certified Safety of Professional (BCSP)

Projects:

NYCT CONTRACT: C-43749

CONTRACTOR: LANMARK GROUP INC. From: 1/5/2015 to Present Position: Safety Engineer

ELEVATOR, ROOF & FACADE UPGRADE PERIMETER PROTECTION and WAR MEMORIAL

RELOCATION at 130 LIVINGSTON PLAZA BUILDING in the BOROUGH of BROOKLYN – $25 Millions

CONTRACTOR: JTJ CONTRACTING From: 4/1/2013 to Present Position: Safety Engineer

NYCT CONTRACT S-32773

DYRE AVE. SIGNAL SYSTEM MODERNIZATION IN THE BOROUGH OF THE BRONX – $220 Million

CONTRACTOR: J-TRACK From: 1/5/2013 – To: 5/13/13 Position: Safety Engineer

N.Y.C.T. CONTRACT C-31673 WO# 50

ROCKAWAY FLATS EMERGENCY REPAIR – $60 Million

CONTRACTOR: ALLIED PAINTING From: 6/23/12 - To: 12/6/12 Position: Safety Engineer

NYCT CONTRACT C-33131

OVERCOAT PAINTING OF ELEVATED STRUCTURES FROM

ALABAMA STATION TO CYPRESS HILL STATION JAMAICA

LINE IN THE BOROUGH OF BROOKLYN – 5 Million

CONTRACTOR: TC-ELECTRIC From: 2/5/12 - To: 6/17/12 Position: Safety Engineer

NYCT CONTRACT C-33850

STEINWAY TUBE DUCT REHABILITATION AND CIRCUIT

BREAKER HOUSE CONSTRUCTION IN THE BOROUGHS

OF MANHATTAN AND QUEENS - $25 Million

CONTRACTOR: LANMARK GROUP LLC. From: 8/09 - To: 10/11 Position: Safety Engineer

NYCT CONTRACT 30815 RHABILITATION

OF 3 SUBSTATIONS SUB-STATIONS IN THE

BOROUGHS OF MANHATTAN & BRONX – $20 Million

CONTRACTOR: USA ROOFING From: 10/1/08 – 8/09 Position: Safety Engineer

CONTRACT C-34773 FACILITY ROOF REPAIR & REPLACEMENT

AT 7 LOCATIONS IN THE BOROUGH OF BROOKLYN AND QUEENS – $6 Million

Contact this candidate