Mechanical Engineer
Resume:
DANANG SETIA WARDHANA
Career Summary
I was working as QC Mechanical Inspector in Sapura Kencana Petroleum previously was an Assistant H/Up Mechanical Engineer and Assistant Engineer Mechanical Completion/Pre-Commissioning in PT McDermott Indonesia. I have experienced as a Mechanical Supervisor Mechanical Completion on Offshore, Inspection for Mechanical Equipment or Machinnery Installation. Understanding of Project Information Management System (PIMS), Inspection Test Record (ITR) and Discipline Acceptance Certificate (DAC), Raising and closing the punch list coordinate with client and vendor .Monitoring and doing alignment of centrifugal pump to motor and I am understanding of P&ID and D&ID, HVAC system and Turbines system. I have experienced in UT Flaw and UT Gauging, familiar with AWSD1.1,ASME VIII ( Acceptance criteria), API RP686 ( Machinery).I certified with CSWIP 3.1 Welding Inspector #107530. I Have a computer literate such as MS Excel. Good in English passive and active, responsible, quick adapt and able to work in under pressure situation with minimum supervision.
Experiences
February 2014- June 2016
QC Mechanical Inspector
ISBL MODULE BECHTEL WHEATSTONE PROJECT
Sapura Kencana Petroleum Sdn Bhd
Summary of duties and responsibilities
Inspection of material receiving of mechanical equipment based on ITP
Reviewed the MIR Material Inspection Report and MIDR Material Inspection Deficiency Report
Checking and reviewed the P.O and MTO
Inspection of mechanical equipment installation in accordance with client spec and ITP.
Inspection and checking the equipment installation preparation such as DC, Leveling, Support installation, etc.
verification of material during MVR Material Verification Report
Visual inspection for welding defect after fit-up
Inspection and checking the material certificate, material traceability and dimension checking prior to fit up.
Doing surveillance during process of installation and erection support and equipment.
Performed Inspection based on check sheet for ITR ( Inspection Test Record) after equipment installation in accordance with spec and standard requirement.
Otober 2013-February 2014
Assistant Hook-Up Engineer Mechanical-Structure
Kepodang Petronas Carigali Muriah Project
PT. McDermott Indonesia, Batam Fabrication Yard, Indonesia.
Summary of duties and responsibilities
Task sheet preparation for Hook Up base scope and carry over work
Task sheet preparation for punch list carry over work
Estimating man hours for hook up phase base scope and carry over work
based on Standard Base Unit.
Monitoring the hook up activity on offshore scope
Preparing MTO ( Material Take Off)
February 2012-October 2013
Assistant Engineer Mechanical Completion
KJV Gorgon PAR’s/PAU’s Project
PT. McDermott Indonesia, Batam Fabrication Yard, Indonesia.
Summary of duties and responsibilities
Visual inspection for complete and correct installation.
Internal inspection of tanks and vessels.
Alignment.( Rim and Face Methode)
Load testing of lifting equipment.
Bolt tensioning.
Dimension control.
Preservation.
Issuing and coordinate with client regarding worksheet for equipment preservation schedule
Input progressed of preservation activity
Getting involved in joint inspection for new equipment received.
Witnessed for any mechanical equipment installation and ensure its in accordance with the spec requirement.
Attended in Mechanical Coordination Meeting with client representative and production.
Issuing MR ( Material Requisition) for any material or equipment that support mechanical completion activity
Planning and coordinate the Mechanical Completion daily activity based on the production installation progress to meet the schedule.
Encourage sub ordinate to aware and implemented the safety working environment and safety work practices.
Establish close communication and teamwork with other disciplines to ensure overall successful completion
February 2009– October 2011
Mechanical Supervisor
Platong II Chevron Thailand Project
PT. McDermott Indonesia, Batam Fabrication Yard, Indonesia.
Summary of duties and responsibilities:
Responsible for the successful completion of the mechanical disciplines scope during fabrication, installation and mechanical completion. To coordinate, supervise and manage a team of production electrical and instrument engineers in preparation and executing the projects but not limited to the following activities.
Inspection and supervise the installation HVAC system at project PLATONG GAS II CHEVRON THAILAND with client and vendor.
Review the P&ID and D&ID for all equipment and raising the punch-list regarding the issue.
Supervise and pre-comm all the mechanical equipment in accordance with the project specification.
Preparing the ITR document for MC and give notification to the client
And update in the PIMS program/database
To review and verify that all Mechanical Equipment were completed erection by construction
To monitor the progress against the MC schedules to ensure work activities are completed as per schedule.
Ensure relative discipline work is completed in complete compliance with project safety policies and procedures.
Ensure PPE requirements are strictly enforced. Be an active participant in the safety program and achieving safety goals.
Monitor field construction activities to ensure all the equipment are met in compliance with drawings, specifications, and relevant codes.
Be actively involved in Mechanical Completion final sub-system inspection prior to MC acceptance of sub-systems.
Establish close communication and teamwork with other disciplines to ensure overall successful completion.
Pre-Commissioning for mechanical equipment in Offshore
Completion of mechanical equipment for carry over work in offshore scope.
Closing Punch List and document the Progress for Carry Over Work scope in offshore
Issuing Permit to work (PTW) as Performing Authority.
Doing maintenance for Wilden Pump to support Preservation Team in Gorgon Project.
March, 1998 - February, 2009
Equipment Engineering
PT. Advanced Interconnect Tech .
Summary of duties and responsibilities:
Repairing and trouble shoot for any equipment have major breakdown in mechanical/electrical
Ensure all system are in good condition,
Verification and analyze the problem and give corrective action in accordance with client spec. Working as a team with sub ordinates,superior and client to develop good communication.
Encouraged the sub ordinate to always give a continuous improvement
Buy-off the new equipment
September 2008-October 2009 UT INSPECTOR
PT PAKARTEK ENGINERING
Freelancer
Summary of duties and responsibilities:
Performed UT plating and stiffener on ship MSC Rosella in PT. Pan united, Tanjung Uncang Batam using Krautkramer.
Performed UT Hatch Coaming and HatchCover on ship MSC Rosella in PT Pan United, Tanjung Uncang Batam using Krautkramer
Performed UT Flaw of A-Frame at PT. Pan United Batam using USM-35.
Doing UT Flaw to detect lamination defect of Plate in PT Pan United Shipyard Indonesia
UT Flaw of Y Bracket at H 185 using USM 35 In Drydocks World Pertama in accordance with ABS rule.
UT Flaw at Hull 191 on Drydocks world for Crane Colomn in accordance with AWS rule using USM35 Krautkramer
UT Flaw at Hull 932 on ASL Shipyard Pte Ltd for Crane Colomn in accordance with AWS rule using USM35 Krautkramer
UT Flaw of engine support on ship SIMGOOD 1 in PT Dharma Samudra Marindo ( DSM) in accordance with Bureau Veritas rule..
Education
Polytechnic University of Indonesia
Majoring in Mechanical Engineering
Professional Certification-
CSWIP 3.1 Welding Inspector Lv2 #107530; BOSIET/HUET # 101848
Courses
1. English course ( PPIA/LIA Foundation)-intermediate level 1998
2. Foremanship/Leadership training 2005
3. NDT Ultrasonic Testing/ASNT Level II ( Ikbal M-Yoss) 2008
4. IIF Training ( Incident Injury Free) 2010
5. Permit To Work Training 2010
6. Confined Space Training 2010
7. Design of Pressure Vessel 2011
8. Piping Department Layout 2011
7. BOSIET/HUET Training by Opito International 2011
8. CSWIP 3.1 Welding Inspector Level 2 2015
Codes and Standards (Familiar with)
AWSD1.1, ASME VIII, ABS Rules. API 686 (Machinery Installation), API 660
Firms
Feb 2014- Jun 2016 Sapura Kencana Petroleum Sdn Bhd
Feb 2009 – October 2014 PT. McDermott Indonesia, Batam
Mar 1998 – Feb 2009 PT. Unisem/Advanced Interconnect Tech.
Sep 2008 – Oct 2009 PT. Pekartek Engineering
Computer Literature
Windows Applications
(Microsoft Word, Excel, Power Point, Outlook,)
PIMS/Project Information Management System
Language
Fluent in English and Indonesia
Expected Salary
Negotiable
References
Mr. Daniel Pakpahan (Sr Piping Inspector at +601*********
Sapura Kencana Petroleum Sdn Bhd )
Personal Details
Name : Danang Setia Wardhana
Home address : Cluster Puri Legenda Blok A6 no 6
Batam Center, Batam Island
Phone : +62-813-****-****
Age/Birthday/Place of Birth : 40 years /Jakarta, Indonesia
Nationality : Indonesian
Passport No : B 1568319
Date of issue / Date of expiry : 23 August 2015/23 August 2020
Total years include Current Employer :, 17 years and 10 months
Contact this candidate