Crane Operator Equipment
Resume:
WILFREDO FLORES GUILA
*** ******** **. ***. *****, Balanga City
Bataan, Philippines 2100
Mobile No.: +639*********
Mobile No.: +639*********
Email Add: *************@*****.***
POSITION DESIRED
CRANE OPERATOR
HEAVY EQUIPMENT OPERATOR
CAREER OBJECTIVE
To further enhance my knowledge, skills, and competencies as Crane Operator
To make significant contribution towards the success of the company
To perform the assigned duties and responsibilities efficiently and effectively
To provide myself job satisfaction, as well as financial stability
SUMMARY OF QUALIFICATIONS
For more than 24 years of work experience on heavy industries like oil and gas, construction, mining, road project, housing project enable me to perform jobs with high standard of safety.
Can operate all kinds of crane and heavy equipments
CRANES HEAVY EQUIPMENTS
Cobelco 100 tons Back Hoe Caterpillar 330C, 330D, 330B
Colbelco 160 tons Pay Loader Caterpillar 966K, 972H, 980H
Tadano 25,30,35,40,45,50,80 tons Grader Caterpillar 12G, 14G, 16G
Groove 30,35,40,45,50,80 tons Bulldozer Caterpillar D7H, D8K
Kato 20,25,30,35,50 tons
Sumitomo 50 tons
Liebberr 50 tons
WORK EXPERIENCE
1.Position: Crane Operator
Duration: June 26, 2016 up to Present
Company: New Crest Gold Mining LTD
Company Industry: Gold Mining
Location: Lihir Island Papua New Guinea
Department: Rigging
Tadano 50 tons rough terrain
Tadano Mounted Truck 55 tons
Follow directions carefully. Operate crane under general supervision.
manipulate or depress cane controls to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
Repair crane as needed.
Inspect crane for safety issues on a daily basis.
Determine if any parts are malfunctioning.
Complete job tickets, service quality summaries, and all other necessary paperwork.
Lift, position and place machinery, equipment or other large objects at construction sites and industrial facilities.
Drive trucks to worksites and unload trucks.
Place blocks and outriggers to prevent capsizing when lifting heavy loads.
Move levers and pedals to rotate crane on chassis to raise and lower crane boom and to raise and lower load-line.
Bolt boom sections together to extend or modify boom for pile driving or high lifting.
Work with in precise limits and standards of accuracy.
Operate crane according to signals from helper.
Start and stop crane engine.
2.Position: CRANE OPERATOR/ TADANO 50 TONS
Duration: April 15, 2014 - May 30, 2016
Company: DAELIM Petron Bataan Refinery
Company Industry: Oil and Gas Refinery
Location: Limay Bataan Philippines
Department: Rigging
-Tadano 50 tons
Ability to understand and apply the information contained in the crane manufacture’s operating manual including load/capacity charts, diagram and apply all notes and warnings related to the charts to confirm the correct crane configuration to suit the load, site and lift conditions.
Ability to safety hoist, move and place materials and objects, using attachment, such as sling, electromagnet, graplle hook, bucket, demolation ball, and clamshell]
Understanding of load rigging procedures and the ability to determine how much materials can be safety hoist in each according to the crane’s capacity and the weather conditions, e.g high winds, crane configuration
Ability to monitor weather conditions and knowledge of conditions which require the crane operation to be shut down
Ability to correctly identify how much material can be safety hoisted in each load according to the crane’s capacity and the weather conditions, e.g. high wind
Operate crane under general supervision.
Manipulate or depress cane controls to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
Repair crane as needed.
Inspect crane for safety issues on a daily basis.
Determine if any parts are malfunctioning.
Complete job tickets, service quality summaries, and all other necessary paperwork.
Lift, position and place machinery, equipment or other large objects at construction sites and industrial facilities.
Drive trucks to worksites and unload trucks.
Place blocks and outriggers to prevent capsizing when lifting heavy loads.
Move levers and pedals to rotate crane on chassis to raise and lower crane boom and to raise and lower load-line.
Bolt boom sections together to extend or modify boom for pile driving or high lifting.
Work with in precise limits and standards of accuracy.
Operate crane according to signals from helper.
Start and stop crane engine.
Follow directions carefully
3.Position: CRANE OPERATOR
Duration: November 1, 2013 – April 8, 2014
Company: ALYAMAMA ENGINEERING COMPANY
Company Industry: Oil and Gas Refinery
Location: Iraq
Department: Rigging
-Tadano mounted truck 50 tons
Job Descriptions
Ensuring that the operator is well trained, licensed where required, experienced, and competent to operate the particular crane to which they are assigned on the particular job involved.
Providing ongoing, high-quality training and upgrading programs for all personnel to ensure a consistently high level of competence in all phases of the operations.
Having a thorough knowledge of the information contained in the crane's operating manual.
Being familiar with the crane's load chart. The operator must understand the correct meaning of all notes and warnings and be able to calculate or determine the crane's actual net capacity for every possible configuration of the machine.
Inspecting and maintaining the crane regularly as prescribed by both the owner and manufacturer.
Informing the owner of any problems, needed maintenance, or necessary repairs to the machine. This should be done in writing, preferably in the machine's logbook or inspection report.
Recording in the log or report the details of all inspections, maintenance, and other work done on the crane while in the field.
Supervising and training the apprentice if one is present.
Being aware of any site conditions that could affect the crane operation. Be particularly cautious around powerlines. The operator must refuse to operate if the crane, hoist rope, or load will come closer to a powerline than the absolute limit of approach specified in law.
Checking that the site is adequately prepared for the crane.
Reviewing the planned operation and requirements with the site supervision.
Finding out the load and rigging weight and determining where the load is to be placed. Although the operator is not responsible for determining the weight of the load, if the operator lifts it without checking the weight with site supervision, then the operator becomes fully responsible for the lift and any consequences that result.
4.Position: CRANE OPERATOR
Duration: June 26, 2012 - november29 2012
Company: KENTZ ENGINEERS & CONSTRUCTORS
Company Industry: Mining & Quarrying
Location: Moma, Nampula Mozambique, South Africa
Department: Rigging
-Liebherr 50 tons
Job Descriptions
Ensure that equipment is maintained with maximum efficiency and productivity by initiating corrective action and ensuring maintenance and engineering standards are adhered to.
Maintains safe operating conditions to protect people and property from injury by the moving equipment.
Ensure that the performance management process is utilized and performance meets the needs of the company and team.
Applied improve works procedures to ensure safety ang efficiency operation.
May be designated according to attachment as Clamshell Operator (any industry) I; Demolition-Crane Operator (any industry) I; Electromagnet-Crane Operator (any industry) I; Orange-Peel Operator (any industry) I. .
May lubricate motor and moving parts of crane.
Pushes and pulls levers and presses pedals in response to hand signals to rotate crane on chassis and raise and lower crane boom and loadline.
Starts engine and drives crane to work site, steering crane by moving levers and pressing pedals that control motion of crawler treads.
Operates diesel-, gasoline-, or electric-powered crane mounted on crawler treads to lift and move material and objects.
Ensure that changes to the plant insfracture comply with the management of change procedures.
Ensure that the human resources are followed.
He should be knowledgeable about how much weight can be lifted safely depending on weather and also the capacity of the crane. Additionally, he examines and maintains his crane for any defect.
5.Position: CRANE OPERATOR/ GROOVE 50 TONS
Duration: May 4, 2011 - Mar 2, 2012
Company: KENTZ ENGINEERS & CONSTRUCTORS
Company Industry: Coal Mining Project
Location: Beira Mozambique, South Africa
Department: Rigging
-Groove 50 tons
Job Descriptions
Observes load hookup and determines safety of load. Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions. Cleans and maintains crane and hoisting mechanism.
Inspects crane for defective parts and notifies supervisor of defects or malfunctions. May attach load to hook or other crane accessory prior to operating crane and be designated to drive to designated locations as required.
5.
Position: CRANE OPERATOR/ COBELCO 160 TONS CRAWLER
Duration: Sep 20, 2010 – April 24, 2011
Company: KENTZ ENGINEERS & CONSTRUCTORS
Company Industry: Moatize Coal Mine Project
Location: TETE, Mozambique, South Africa
Department: Rigging
-Cobelco 160 tons crawler
Job Descriptions
Installs and removes crane booms, extensions and hook blocks. Positions crane outriggers assemblies and maneuvers in response to hand signals.
Installs rigs and removes crane attachments. Performs clamshell, dragline, and hook block operations. Determines safe lifting capacities.
The Crane Operator will drive to and from the area office to the customer’s location and back to the areas office.
Maintains accurate work tickets based on the Company’s requirements and the work performed for the customer as well as maintaining accurate driving log books, pre-trip/ post-trip information and maintenance files on the crane.
6.Position: CRANE OPERATOR/ COBELCO 100 TONS CRAWLER
Duration: Dec 10, 2008 - Aug 5, 2009
Company: JERRY ACUZAR ENTERPRISES
Company Industry: Construction / Building / Engineering
Location: Balanga City, Batan Philippines
Department: Motor Pool
-Cobelco 100 tons crawler
Job Descriptions
Operate trucks of various sizes and weights in the loading, hauling and unloading of various equipment, materials, and supplies.
Operate trucks and construction or power equipment, such as mechanized broom, backhoe, man-lift, dump truck, snowplow, road grater, front-end loader, hydraulic excavators, skid steers, and jetter/inductor truck.
Operate jackhammers, mowers, brush chippers, and other small equipment and tools to maintain street and utility systems.
Work with and assist the line crew in digging ditches and trenches, hoisting material, tools, equipment, and any related work with a backhoe, road grater, or front-end loader.
Perform routine inspection and preventive maintenance on assigned equipment and refer defects or repairs to supervisor; clean equipment.
Assist in the installing and maintenance of traffic control devices.
Plow snow and salt roads according to departmental policy.
Perform all duties in conformance to appropriate safety and security standards.
7.Position: CRANE OPERATOR/ TADANO 100 TONS ROUGH TERRAIN
Duration: july 15, 2008 – November 28, 2008
Company: KENTZ ENGINEERS & CONSTRUCTORS
Company Industry: Mineral Sands Project
Location: Fort Dauphin, Madagascar, South Africa
Department: Rigging
-Tadano 100 tons rough terrain
Job Descriptions
May attach load to hook or other crane accessory prior to operating crane and be designated Crane Operator-Hooker or Crane Operator-Hooktender.
Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
Inspects crane for defective parts and notifies supervisor of defects or malfunctions.
8.Position: CRANE OPERATOR/ SUMITOMO 50 TONS CRAWLER
Duration: Feb 19 2008 - Apr 6, 2008
Company: QATAR Engineering and Contructions Company
Company Industry: Oil and Gas
Location: Messaid,Qatar
Department: Rigging
-Sumitomo 50 tons crawler
Job Descriptions
Capable of moving in the vertical and horizontal plane
Capable of raising, lowering, or moving a load suspended from the boom by a hook or rope
Mounted on a mobile base or chassis, and includes a telescoping or articulated boom, but does not include equipment that is used exclusively for firefighting or by automotive wreckers and tow trucks to clear wrecks and haul vehicles.
9.Position: CRANE OPERATOR
Duration: Feb 14, 2004 – April 14, 2006
Company: BAKER OTS / LNLG
Company Industry: Oil / Gas
Location: Port Harcourt,Bonney Island Nigeria
Department: Motor Pool
Grove 45 tons
Job Descriptions
Ensuring that the crane has the rated capacity necessary for the job.
ensuring that the operator is well trained, licensed where required, experienced, and competent to operate the particular crane to which they are assigned on the particular job involved.
Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Running, maneuvering, navigating, or driving equipment.
Using hand and arm signals for installing, handling, positioning, and moving materials, and manipulating things.
10.Position: PAY LOADER / HEAVY EQUIPMENT OPERATOR
Duration: Jun 12, 1997 - Jun 12, 2000
Company: BATAAN THERMAL POWER PLANT
Company Industry: Construction / Building / Engineering
Location: Limay, Bataan
Department: Motor Pool
Catterpillar 994
Job Descriptions
Set up or inspect equipment prior to operation.
Move levers, depress foot pedals, and turn dials to operate power machinery, such as power shovels, stripping shovels, scraper loaders, or backhoes.
Receive written or oral instructions regarding material movement or excavation.
Become familiar with digging plans, machine capabilities and limitations, and with efficient and safe digging procedures in a given application.
Observe hand signals, grade stakes, or other markings when operating machines so that work can be performed to specifications.
Move materials over short distances, such as around a construction site, factory, or warehouse.
Operate machinery to perform activities such as backfilling excavations, vibrating or breaking rock or concrete, or making winter roads.
Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
Create and maintain inclines and ramps, and handle slides, mud, and pit cleanings and maintenance.
Measure and verify levels of rock or gravel, bases, or other excavated material.
Drive machines to work sites.
Perform manual labor to prepare or finish sites, such as shoveling materials by hand.
Adjust dig face angles for varying overburden depths and set lengths.
Direct ground workers engaged in activities such as moving stakes or markers, or changing positions of towers.
11.Position: GRADER CAT TYPE 12G. 14G. / HEAVY EQUIPMENT OPERATOR
Duration: Jun 12, 1993 - May 10, 1996
Company: NORVE CRUZ CONSTRUCTION
Company Industry: Construction / Building / Engineering
Location: Samal, Bataan Philippines
Department: Motor Pool
Cat Motor Grader 160M2
Job Descriptions
Grader Operator/CAT Type 12g. 14g.
Drive equipment with blades that level or pick up earth for dumping.
Use bulldozers, backhoes, and tractors for moving large amounts of dirt.
Move throttle and depress pedal to begin smoothing or lifting earth.
Align machine, cutter head, or depth gauge marker with reference stakes and guidelines on ground or positions equipment.
Follow directions of assistant on ground.
Make successive passes over earth until job is done.
Use tamping machine to smooth down plot.
Attach different types of blades or attachments depending on job.
Grease, oil and calibrate machinery.
Connect hydraulic hoses, belts, mechanical linkage, or power takeoff shaft to tractor.
Use asphalt paving machines and concrete paving machines to smooth roads.
Control machine using pedals and levers.
Practice safety during operation.
Weld and cut materials.
Use different kinds of oil and greases.
Read plans for job completion.
Work with project manager to ensure job is done to specifications.
Repair machines as necessary.
12.Position: BACKHOE OPERATOR / HEAVY EQUIPMENT OPERATOR
Duration: May 2 1990 – May 2 1992
Company: ABDULLAH A. M. AL KHODARI EAST
Company Industry: Genaral Contructor
Location: DAMMAN, SAUDI ARABIA
Department: Motor Pool
Cat 385CL
Job Descriptions
Minor maintenance and care of equipment.
Responsible for the safe operation of digging in all conditions.
Excavate around existing utilities, above and below the ground, in a safe manner.
Properly checks out, lubricates, and fuels any equipment that is asked to use.
Load trucks in a timely manner.
Able to dig slopes when needed.
Set up and put away job equipment.
Assist in the cleaning of tools, equipment and work areas.
Report any unsafe condition, accident or injury to crew leader.
Performs any other duties from time to time as may be assigned by the crew leader.
13.Position: HEAVY EQUIPMENT OPERATOR
Duration: Apr 30, 1980 - May 5, 1983 (3 yrs)
Company: (S.A.E.) SOCIETE D' AUXILLARY ENTERPRISES
Company Industry: AANA AND RAWA HOUSING PROJECT
Location: Alyarmouk, Baghdad Iraq
Department: Motor Pool
Grader 14g
Job Descriptions
Operates tractor equipped with concave blade attached across front to gouge out, level, and distribute earth and to push trees and rocks from land preparatory to constructing roads and buildings or planting crops, or in mining, quarrying, and lumbering operations: Fastens attachments to tractor with clevis or wedge-pin hitches.
Connects hydraulic hoses, belts, mechanical linkage, or power takeoff shaft to tractor to provide power to raise, lower, or tilt attachment.
Moves levers to control tool bars, carriers, and disks.
Moves levers and depresses pedals to maneuver tractor and raise, lower, and tilt attachment to clear right-of-way.
Feels lever and listens for stalling action of engine to estimate depth of cut.
Drives bulldozer in successive passes over terrain to raise or lower terrain to specified grade following markings on grade stakes or hand signals.
Greases, oils, and performs minor repairs on tractor, using grease gun, oilcans, and handtools.
When required to work to close tolerances, may be designated Fine-Grade-Bulldozer Operator.
When operating bulldozer to loosen soil, may be designated Scarifier Operator.
May be designated according to type of tractor operated as Crawler-Tractor Operator; Forest Fire Equipment Operator; or attachment added as Angledozer Operator.
May operate bulldozer to scrape surface clay to determine existence and types of clay deposits or to gather clay into piles preparatory to removal to brick-and-tile manufacturing plant and be designated Scraper Operator.
PERSONAL INFORMATION
Age : 60
Date of Birth : Oct 2, 1956
Gender : Male
Civil Status : Married
Height : 170 cm
Weight : 150 kg
Nationality : Filipino
Religion : Christianity - Catholic
Permanent Address : 163 Escalada St. Pto. Rivas, Balanga, City,
Bataan, Philippines 2100
EDUCATIONAL ATTAINMENT
LEVEL SCHOOL INCLUSIVE YEARS
Secondary T.del ROSARIO ACADEMY 1970 – 1974
Primary TORTUGAS ELEMENTARY SCHOOL 1965 - 1970
TRAININGS/SEMINARS
Date Topic/Course Title
April 20, 2016- April 23, 2016 Executive Technical Consultants
Trade test and Training Center Inc.
New Panaderos St., Ext., Sta. Ana, Manila
Sep 26, 2010- Sep 26, 2012 Spes Training cc -Crane operator 104 Tons
Luther Lhavanguane. Cel No# 002 588-***-*****
Motiz, Tete, Mozambique, South Africa
Sep 26, 2010- Sep 29, 2010 CRANE OPERATOR
SUPER TREINOS LDA
Date issued 26/09/2010 MOTIZ, MOZAMBIQUE, SOUTH AFRICA
Expiring date 26/09/2012
Oct 1, 2008 – Oct 2, 2008 CRANE OPERATOR
Executive Technical Consultants
Trade test and Training Center Inc.
New Panaderos St., Ext., Sta. Ana, Manila
Mar 8, 2008- Mar 10, 2008 CRANE OPERATOR
Executive Tech. Consultants/Trade Test & Training Center Inc.
KENTZ ENGINEERS AND CONSTRUCTORS
Fort Dauphin Madagascar
March 1, 1990
Valid up to March 1 1992 BACKHOE OPERATOR CLASS A TECHNICHIAN SERVICES INC.
Eureka Agency Manila Philippines
LICENSES/CERTIFICATIONS
License/
License/ Certification
Certification No. Date
1. Matola, Mozambique, South Africa T9505/142/542 Sep 26, 2010
2. Balanga City, Bataan co2-74009755 Oct 2, 1974
SKILLS
Skill Yrs. of Experience Remarks
1. Crane Operator 16 very good
2. Heavy Equipment Operator 5 very good
3. Heavy Duty Driver 4 very good
4. Mechanical Fitter 3 very good
5. Rigger 2 very good
LANGUAGES SPOKEN
Filipino/ English
Arabic
Portuguese
REFERENCES
Joet Garcia Congressman of Bataan 2nd District
Balanga City, Bataan Philippines
Tel.No.: +639*********
Email: ****.******@*****.***
Robert Jay A. Magallo Architect
Puerto Rivas, Balanga Bataan Philippines
Tel.No.: +639*********
Email: ***********@*****.***
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
WILFREDO FLORES GUILA
Applicant
Contact this candidate