K.S.VENKATESAN

Contact address: No **/C ** Chenniappan Street, vadalur, Cuddalore Dist, Tamil Nadu 607303Mobile: +919*********, 900-***-**** E-Mail: acx6fc@r.postjobfree.com (or)acx6fc@r.postjobfree.com

PROFESSIONAL

DIPLOMA (Electrical & Electronics Engineering) with over19+ years of valuable experience across oil and gas off/on shore Plant.

COMPEX (EX) COURESE LEVEL (01-04), I am capable to lead the Ex Inspector Activities in oil and gas filed All E& I system

Scope of expertise covers:

- Shot Down - Installation - Testing & Commissioning

- Trouble shooting - Safety Compliance - Operations & Maintenance

CORE COMPETENCIES

Hands on experience in planning and Execution and per-commissioning and startup, preventive and Breakdown maintenance of all types of control and power panels of gas turbines up to 40 MVA.Ability to calibration of electrical equipment .Have sufficient Knowledge

Rich exposure in oil and gas plant,maintenance of transformer,generator, switch gears & Air Break switches .Gained sound knowledge on all types of motor controls relay panels, UCP panels,PMCS panels,

Hands on experience in planning for ICAPS preparation commissioning Activities

Effecting preventive maintenance schedules of various equipment’s to increase the equipments up time/ reliability & accomplishing production targets.

Working Experience in Organization:

Dec 2015 TO Aug 2016 ELECTRICAL TECHNICIAN

Employer : CAIRN ENERGY INDIA PTY LIMITED

Role : Electrical Technician

Scope : Operation & shutdown Maintenance for Maintenance In Process Plant Site Substation, High Voltage, Medium Voltage,Low Voltage Control Room, Relay Panel,Trouble Shooing Of All Type of Electrical Equipment’s and Panel .All type of Breakers Sf6 Breaker, Vacuum Circuit Breaker, Air Circuit Breaker, all type of Motors AC Motor, DC Motor, AC Drive, DC Drive, Motor operated Valve (MOV) Heat Tracing, Lighting Distribution System HVAC, Motor Control Centre (MCC), Power Control Centre (PCC), Electrical Distribution Board (EDB),Electrically operated Track ( EOT) Crane, Transformer maintenance, Oil filtration BDV test(Break Down Voltage), Preventive Maintenance, Annual Shutdown Modification And Maintenance.

Apl 2015 TO Dec 2015 LEAD ELECTRICAL COMM TECH

Employer : SHELL MAJNOON OILFILED IRAQ –Through (Wood Group PSN LLC)

Role : Electrical Commissioning Technician

Scope : Commissioning &Startup of Electrical equipment’s in oil and gas

The project involved, Commissioning Startup & Testing of transformer, Power Panels, Circuit Breaker, Lightning Arrestor, Gas turbine (SIEMENS 400), CP system, Fire water, motors, Soft starter,VFD, Scheme Checking, Planning, etc.

April 2014 TO Till April 2015 LEAD ELECTRICAL TECH

Employer : Oman Oil Company Exploration LLC –Through (Petrofac off shore Oman LLC)

Role : Lead Electrical Technician

Scope : Commissioning &Startup of Electrical equipment’s in oil and gas

The project involved, Commissioning, shot down, Startup & Testing of transformer, Power Panels, Circuit Breaker, Lightning Arrestor, Gas turbine, CP system, Fire water, motors, Soft starter,VFD, Scheme Checking, Planning, etc.

Sep 2011 to July 2013 SR ELECTRICAL COMM TECHNICIAN

Employer : AGIPKCO Kashan Field Development Project (PSN OFFSHORE KAZAKHSTAN)

Role : Sr Electrical Commissioning Technician

Scope : pre commissioning and commissioning of offshore Electrical equipment

The project involved Mechanical completion of all electrical equipment,ICAT statement follow for all equipment per commissioning Activities, Battery charging and Discharging, Testing of Breakers Open & Closing Timing, Contact Resistance in micro ohms & Trip test by Secondary and Primary Injection for such as VCB, ACB, MCCB, Testing of Switchgear Bus bar and Cables Hi-pot test

Testing of Transformer Winding Resistance, Insulation Resistance, Impedance, Oil Temperature Gauge, Winding Temperature Sensor (RTD), Vector Group & Sensitivity & Stability Test with Restricted Earth Fault and Earth Fault Relay

Nov 2007 TO Sep 2011 SR ELECTRICAL TECHNICIAN

Employer : PDOC Petrodar Operating Company (Melt Basin oil Development Project, Alijabalayan, Sudan.

Role : Sr Electrical Technician

Scope : Operation & shutdown Maintenance for Maintenance In Process Plant Site Substation Gas Turbine (SIEMENS ), High Voltage, Medium Voltage,Low Voltage Control Room, Relay Panel,Trouble Shooing Of All Type of Electrical Equipment’s and Panel .All type of Breakers Sf6 Breaker, Vacuum Circuit Breaker, Air Circuit Breaker, all type of Motors AC Motor, DC Motor, AC Drive, DC Drive, Motor operated Valve (MOV) Heat Tracing, Lighting Distribution System HVAC, Motor Control Centre (MCC), Power Control Centre (PCC), Electrical Distribution Board (EDB),Electrically operated Track ( EOT) Crane, Transformer maintenance, Oil filtration BDV test(Break Down Voltage), Ring loop Checks for the Manufacturers Of Electrical Control Wiring Switchboard & Relay Panel, UPS System and Transformer maintenance. Field Site Shut Down Jobs, Preventive Maintenance, Annual Shutdown Modification And Maintenance.

July 2006 to Jun 2007 ELECTRICAL FOREMAN

Employer : QATAR GAS through GS-Daewoo Consortium Qatar

Role : Electrical Foreman

Scope : Erection of Substation work, Panel, Transformer outdoor and indoor type, Bus duct installation, motor,cp system for tank, lighting work etc.……

May 2001 to Jun 2006 SR ELECTRICAL TECHNICIAN

Employer : ONGC Oil &Natural Gas Company (Offshore) Mumbai Through S.S Construction Ltd.

Role : Sr Electrical Technician

Scope : Commissioning maintenance shot down of Electrical equipment’s AC DC Motors, Drivees, CAT Diesel Generator (2400 KW), UPS System, Mud plumb, shale shaker, screw air comprosser,mud tank system, Lighting etc….

July 1998 to Dec 2001 ELECTRICAL TECHNICIAN

Employer : OGD-II Gas Gathering System and Trunk Line Project-Through CCIC.

Role : Electrical Technician

Scope : Erection of Substation and filed side of All Electrical Equipment’s such as cabling laying, cable tray,panel installation work,lighniting Arrester,Bus Duct, Transformer,etc.……

Feb 1995 to Oct 1996 ELECTRICAL F&G TECHNICIAN

Employer : ADNOC Onshore Gas Development Project-Through CCIC

Role : Electrical and F&G Technician

Scope : Erection & Pre Commissioning and shot down of Electrical and Fire and gas system, smoke, heat, flame, UVIR, vesda system etc….

Aug 1993 to Feb 1994 ELECTRICIAN

Employer : YEMEN MASILA REFINERY PROJECT through CCIC

Role : Electrician

Scope : Erection of Substation and filed side of All Electrical Equipment’s such as cabling laying, cable tray,panel installation work,lighniting Arrester,Bus Duct, Transformer,etc.…… 230/110/22/11KV Substation.

Aug 1991 to Feb 1993 ELECTRICIAN

Employer : Madras Refinery Ltd. India

Role : Electrician

Scope : Erection of Substation and filed side of All Electrical Equipment’s such as cabling laying, cable tray,panel installation work,lighniting Arrester,Bus Duct, Transformer,etc.…… 230/110/22/11KV Substation.

KNOWLEDGE PREVIEW ELECTRICAL

Erection, Testing & Commissioning, shot down & O & M of Turbo Generators Rated Power Up to 30MW.

Testing of Current Transformer & Voltage Transformer Insulation Resistance, Winding Resistance, and Polarity Test, Ratio Test & Magnetic characteristics Curve Test.

Functional and Interlock Testing of ABB 6.6 KV Switchgears such as Two Incomers with Bus Tie and Two Incomers without Bus Tie

Installation, Testing &commissioning of protection interlocking scheme and modification and preparation cabling and inter connection schedules .6.6KV,11KV and low voltages Switchgears.

commissioning Activities of GAS TURBINE (SIMENS -400,GE TM 2500) 13.5 MW,30MW

Maintenance and commissioning Activities AC/ DC Uninterrupted power supply(GUTUR,BORRY)

Functional Testing of Essential Switchgears with Emergency Diesel Generator (4 x 2500 KVA), such as Auto Start Sequence during main failure & Test Run Synchronizing with main, Controlled by PLC (SIEMENS S7-400) and Switchgear Interface, Control Interface Checking between Switchgear and DC.

Maintenance of cathode production system

Testing of Protection Relay Such as Under Voltage, Earth Fault, Restricted Earth Fault, Synchrony check, Synchronizing, Bus bar Protection, Motor Protection (N-DIN-M) & Generator Protection Relay (SYMAP) by Secondary and Primary Injection

Testing and Commissioning and O&M of 230KV sub-station equipment’s such as yard isolators, CT’s, PT’s, SF6 breaker and 230/11KV 90 MVA & 11/6.6KV 16MVA & 230/6.6KV 31.5MVA power transformer, Air Break Switch & Control Relays.

Testing & Maintenance of 230KV sub-station equipment’s Protective relays and its Control Panels.

Erection & Commissioning & O & M of Power Transformers of rating 6.6KV/415V up to 7MVA Plant Auxiliary Transformer and Protective Relays & its control panel.

Commissioning & O & M of LT Motors Up to 415Kw.

Commissioning & O & M of HT Motors Up to 2100KW.

Testing & Maintenance Experience of HT Motor Protection relays.

Testing & Maintenance Experience of LT Motor Protection relays.

Maintaining of HT Motors up to 2100KW & LT Motors up to 415KW and its accessories for Annual, Periodic and Preventive maintenance.

Operation and Maintenance & Trouble Shooting of LT Motors VFD drive.

Operation and Maintenance & Trouble Shooting of LT Motors Soft starter.

Operation and Maintenance of Direct-On-Line Starters / Reverse Direct-On-Line Starter, Control Circuits in Intelligent MCC’s interfaced with MCC I/O Panels.

Routine checkup of Battery Banks, Battery Chargers & UPS.

RESPONSIBLITIES

Involved in Maintenance Activities & Preparing Daily, Monthly Generation reports, PM reports etc.

Gas Turbine SIEMENS S7 400 maintenance Activities

Coordination of day to day defects of the plant with maintenance

Troubleshoot, fault find, and repair electrical systems and equipment used on production process and utility systems;

Report daily activities, provide input to safety meetings, and reports any defects or deviations to Superior;

Ensure all activities and works are carried out safely and properly in accordance with established policies and procedures;

Operate the electrical installations such as distribution devices;

Control and record any actions interconnected with remedial and routine maintenance of the electrical equipment;

Responsible for bringing into action electric motors under engineering observation;

Maintain equipment history and all relevant records;

Promote a positive attitude towards maintaining and improving HSE performance;

Make recommendations for changing maintenance schedules based on observed plant performance and failure modes;

Carry out approved modifications to equipment with the agreement of the Electrical Support Engineers and in accordance with company procedures for plant change and project implementation

Ensure sufficient and effective installation, troubleshooting and commissioning of new projects;

Train and lead Electricians;

Job Distribution done as per Permit To Work;

Performing Authority & Isolation Authority for (PTW)

SAFETY COURSES

Helicopter Under water Escape Training Course(HUET

Basic offshore survival Training (BOSIET)

Self-contained Breathing Apparatus (SCBA) GTSC Training Center UAE

Advanced Fire Fighting GTSC Training Center UAE

PTW system Training SHELL MAJNOON IRAQ

H2S,Confined space Training SHELL MAJNOON IRAQ

TECHNICAL SKILLS

Siemens GTG 400 Training at SIEMENS OMAN

Compex Course (01to04) CEGELEC UAE ( 5thJan 2015)

PASSPORT DETAIL

Passport no : L 7588577

Date of Issue : 05/03/2014

Valid up to : 04/03/2024

PERSONAL DOSSIER

Name : K.S.VENKATESAN

Date of Birth & Age : 07 MAY 1973

Father’s Name : MR.K.SUBARAMANIAM

Gender : Male

Marital Status : Married

Nationality : Indian

Language Known : Tamil, English, Malayalam, Hindi, Arabic

Declaration:

I hereby declare that the statement provided above is true to my knowledge and belief.

Date: - With Regards,

Place: - K.S.VENKATESAN

Contact this candidate