Engineering Engineer
Resume:
NEERAJ GUPTA
***************@*****.***
Objective
Seeking a challenging, growing, leading position in field of Mechanical Design Engineering, so that I can utilize my talent (experience & expertise) in leading and motivating the team to achieve the targets/ best growth of organization successfully.
Professional Preface:
A dynamic & competent design experience with more than 6 years of experience in Product design, Tool design, Sheet metal, assembly & construction of T&D. Currently working with Technosoft Engineering, Inc., Brookfield as a Mechanical Design Engg.
Strong ability to create / read / interpret engineering drawings with proficiency in designing & developing new products in conformance to pre-defined technical specifications.
A nascent Certified Professional, Support Technician, Associative of Solidworks with B.E.(Mechanical Engg.) from R.C.E.T (Bhilai) with extensive knowledge based on Mechanical Design & Development.
Skills :
Design : Product, assembly, mold, structure, piping, Sheetmetal fabrication including product modelling, Detailing, validation.
3D software : Solidworks (professional, premium), Unigraphics, Pro-E, CATIA.
2D software : AutoCAD, Draft sight.
Technical
Documentation : 3D-VIA
Educational Qualification
Bachelor of Mechanical Engineering -74% 2009
RCET, Bhilai (CSVTU University)
Higher Secondary School Examination(1st Division)– 75% 2005
State Board of Chhattisgarh.
High School Secondary Examination (1st division)- 73% 2003
State Board of Chhattisgarh
Areas of Expertise
-Analysing and producing the technical requirements and specifications. Recommending design modifications based on client requirements. Gathering product specifications; designing, modifying & upgrading existing designs using specialised software. Providing design support to new product introduction of various products.
-Designing of products, tools and parts with DFM & DFA.
-Having good knowledge of GD&T,tolerance stack up analysis and standards like ASME Y 14.5
-Having good knowledge of sheet meatal fabrication & weld symbols.
-Evolved & planned different stages for the Re-Engineering and Reverse Engineering activities of Components/Parts/Sub-Assemblies.
-High attention to detail; Demonstrated ability to work under pressure and meet tight deadlines
-Check 3D models and manufacturing drawings.
-Review of detailed engineering, manufacturing feasibility and assessment.
-Idea & concept illustration and presentation design to get the target on time.
-Usage /Utilization of Finite Element/Volume/Difference Method (FEM/FVM/FDM), Analysis software to validate designs when classical EJMA/ASME/Mathematical Calculations do not apply.
-Knowledge of Heat Exchanger design and validation or equivalent components. Understanding of thermodynamics theory and have experience of applying the concept to automotive engine cooling applications or other applications.
Employment History
1.Consultant Engineer for Knapheide Manufacturing Company, Quincy IL: working on contractual basis which includes responsibilities like Completion of Platform body SMO (Special modification order), Design of sheet metal bodies like utilities bodies including tool boxes, bumper assemblies based on bend operations like roll form & break form. Communicating with customers for understanding their requirements& providing engineering support throughout the whole manufacturing process. 2014-till date
2.SR. Mechanical Design Engineer with Technosoft Engg. Projects LTD (USA & INDIA): Responsibilities included Design and Manufacturing of parts, tools, sheet metal parts. Design scheduling and execution as per client requirements, Generating 3D models and mechanical/technical drawings, Solid and surface modelling, prototype making.
2012-2014
3. Design Engg. with TechSavvy Engineers, Noida India: was involved in Concept development with consideration to manufacturing at client site, Assembly, cost point of view called effective Design, Product Design, Re-engineering & Prototyping, All type of Mechanical designing & drafting work like surfacing, moulded component, using Unigraphics, solid works, 2D CAD software. Also responsible for making of new design or drawing of new or old components. 2010-2012s
4.Trainee Engineer GAMMON INDIA LTD (T&D) BUSSINESS India: As an Engineer undergoing training perform duties like Technical Support in project planning, execution of work in site. Project Planning and Distribution of work among the team members. Expert in data collection (400kv SS to consumer end), handling project planning & supervising the survey & contractor team. Supervised detailed & check survey, foundation, erection, stringing work, preparation of detailed project reports & records. Advice to team members for better execution of site work like foundation, erection, stringing work. 2009-2010
DESIGN PROJECTS:
Complete design, modification, validation, detailing & manufacturing drawing for the Yoke part of Mitersaw machine using Solidworks tool.
Detail Drafting of PA6B diesel engine generator set casing for USA based client with proper GD&T as per ASME Y 14.5
Technical documentation of spray painter, Halmatro machine using 3D-via.
Core, cavity and pattern for the Espage lock using CAD tool.
Truck platform bodies which includes concept, modification, modelling, drafting, detailing and manufacturing support of various sheet metal products.
RESEARCH & DEVELOPMENT PROJECTS:
Project Innovations: Worked on the innovative design for manufacturing the Universal weighing machine. The aim of the project was to have a multi-station weight machine for upper body workouts that is accessible to people with a variety of abilities.
New product development of platform bodies by using vast application of Aluminum alloy to replace conventional steel.
Material selection based on its application, manufacturing scope by cost effective operations like forming, extrusion.
Conceptual design by using 3D CAD tool solidworks & prototype.
Design validation and material optimization.
TRANING UNDERGONE:
In plant vocational training at Bhilai Steel plant, India
Undergone training & wok in project namely design (modelling and Drafting) of steering wheel by using Unigraphics NX-4
Automation Engineering Techniques: Attended workshops on automation techniques which included analyzing and building the models of each automatic function by technology.
Computer Proficiency:
A certified Solidworks professional, Sheetmetal expert
Having certification of NX-4, PRO-E.
Having handful knowledge on working with AutoCAD, MS Office.
Certified Six Sigma white belt.
Awards and Achievements:
- Won the Intercollege Championship Cricket Tournament (India) 2008
- Was elected as the Class Representative for consecutive 4 Years during Bachelors
2005- 2009
- Coordinated, supervised and volunteered THE KEEP INDIA CLEAN march for my school for 3 consecutive years
2003-2006
- An active member of India based NGO “Child Relief Fund” which deals with human rights and upliftment of the unprivileged.
PERSONAL DETAILS:
Name NEERAJ GUPTA
Fathers name Mr. S.N. Gupta
Gender Male
Language known English, Hindi.
Hobbies Cooking, Dancing, Playing Cricket.
Nationality Indian
Visa Status H1B
Address 2900 state Street, APT# 103D
Quincy, IL-62301
Contact this candidate