Resume

Sign in

Technician Project

Location:
Siniloan, CALABARZON, Philippines
Posted:
October 04, 2016

Contact this candidate

HAROLD MONTEALTO PADURA

*** ********, **** ****, ********

Philippines

Email Address: acwwe7@r.postjobfree.com

Contact #: +639*********

CAREER SUMMARY

A good experience and training which provide a well-developed, qualified working knowledge primarily related to Instrumentation and Control Technology.

With experience on practicing the different aspect of this profession. Experienced in LNG Plant and Oil & Gas Refinery, Calibration, Pre-Commissioning and Commissioning and start up stage of different types of instruments such as Smart Transmitters, sensors, switches, Fire and Gas systems,valves, gauges with safety awareness.

OBJECTIVE

To be associated with a progressive organization that gives duties and responsibilities applicable to my knowledge and skills in instrumentation and control technology and execute job entrusted to me by the organization to the fullest of my knowledge to derive satisfaction.

DESIRED POSITION

Instrument Commissioning Technician

Instrument technician

WORK EXPERIENCE

Air Energi (Air Swift)

Exxon Mobil

Project : Mobil Cepu Ltd – Banyu Urip Project

Indonesia

Employee No. AIEI0159

Position: Instrument Commissioning Technician

March 21, 2015 up to June 30, 2016

DUTIES AND RESPONSIBILITIES

Assisted operation on Plant Start up for faulty instruments, valves, switches and detectors.

Involved in Plant ESD 2.0, cause and effects and testing of out of service loops and complex loops

Involved in pre commissioning, commissioning, troubleshooting, sequence check and start up of Plant Fire Water pump, Boiler package, water treatment package such as Filtered water package, Raw water treatment package, water clarifier package, Multimedia filters package, Reverse Osmosis package and Potable water pumps package water injection and booster package, fuel gas compressors., gas lift compressors, crude oil shipping pump and booster pump. Done testing the signals, command, operation and level switches and transmitters.

Involved in commissioning of Gas Turbine Generators manufactured by SOLAR Turbines. Done troubleshooting, modification and testing of control cables, loop check of different transmitters, valves, switches and fire and gas and signals

Testing of PH analyzers and conductivity analyzer.

Testing, power up, line check, loop check, functional test, troubleshooting and actual Cause and Effect of Fire and Gas inside the Local Instrument and Electrical room and plant fire and gas.

Commissioning of Det-Tronics gas detector,H2S detector, flame detectors and alignment, loopcheck ad troubloshooting of Detro-Tronics Open Path Gas Detectors.

Setting up of parameters for Khrone Optiflex and Optiwave and Rosemount Radar level transmitter through data sheet and actual installation.

Extensive troubleshooting experience for smart type field devices of all process variable of various manufacturer like Foxboro, ABB, Emerson, Rosemount, Yokogawa, Honeywell Etc.

Field diagnostics, check and remote calibration, modification and configuration by using HART 475, hand held communicator, process loop multi calibrator, pneumatic druck, hydraulic pump, multimeters, decade box, interrogators and other make standard calibrator.

Commissioning and functional test of process loop by interpretation of loop drawings, instrument cabling & terminations details, Hook-up drawing, P&ID drawings and Cause and effect matrix/diagram.

Perform loop checking, functionality test, configuration, troubleshooting and commissioning related activities of various types of instruments for flow, level, pressure and temperature.

Kentz Engineering Ltd.

CBI-Clough

Exxon Mobil

Project : Hides Gas Conditioning Gas Plant

Papua New Guinea

Employee No. K1150

Position: Instrument Commissioning Technician

September 8, 2013 up to July 12, 2014 (Finished Project)

DUTIES AND RESPONSIBILITIES

First gas and start up instrument technician, include troubleshooting of instruments and assist operations during start up.

Involved in commissioning of Air Compressors and Dryers manufactured by ATLAS COPCO. Troubleshooting, modification and testing of control cables from Variable Frequency Drive panel to control panel. Done Cause and Effect of instruments and logic for these compressors.

Involved in commissioning of Gas Turbine Generators manufactured by SOLAR Turbines. Done troubleshooting, modification and testing of control cables, loop check of different transmitters, replacement of vibration probe and driver and speed probe and drivers, replacing ang checking of bearing temperatures and calibration of valves and assisting the vendor for mapping from solar system to honeywell dcs system

Involved in plant cause and effects with regards to fire and gas, complex loops and out of service loops.

Radar level transmitters configuration and functional testing using “Rosemount Radar Master” software,

Simulation of magnetic flow meter ( Yokogawa), Corioles mass flow meter (rheonik) and loop test of differential pressure flow transmitter.

Simulation of Vibration switches of fans and vibration sensors with mvpp or using wobulator through actual testing

Testing, power up, line check, loop check, functional test, troubleshooting and actual Cause and Effect of HVAC System and fire panels with Honeywell System ( Notifier AFP-2800) and FM200 system by Kidde Fire Systems.

Commissioning of Fire and Gas Instruments such as :

Using Bayonet Mount Alignment Telescope for Searchline Excel Open Path Gas Detectors ( IR gas detectors)

Loop checks of Ultrasonic Gas Detectors ( Grovely Gas Detectors)

Actual simulation of gas for combustible gas detectors (HONEYWELL) using CALGAZ and Interrogator.

Loop checking of UV/IR type of gas detectors.

Smoke detectors, manual call points, and deluge systems.

Extensive troubleshooting experience for smart type field devices of all process variable of various manufacturer like Foxboro, ABB, Emerson, Rosemount, Yokogawa, Honeywell Etc.

Field diagnostics, check and remote calibration, modification and configuration by using HART 475, hand held communicator, process loop multi calibrator, pneumatic druck, hydraulic pump, multimeters, decade box, interrogators and other make standard calibrator.

Knowlegeable with Honeywell Experion R400 DCS system.

Calibration, testing, stroking, functional testing and troubleshooting of control valves, shutdown valves, blowdown valves and Motor operated valves installed with fishers field view (series DVC 6000) Masoneilan’s SVI II positioners.

Commissioning and functional test of process loop by interpretation of loop drawings, instrument cabling & terminations details, Hook-up drawing, P&ID drawings and Cause and effect matrix/diagram.

Perform loop checking, functionality test, configuration, troubleshooting and commissioning related activities of various types of instruments for flow, level, pressure and temperature.

Perform loop check and functionality test with coordination to DCS operator for simulation and checking and troubleshooting for field instruments.

Responsible for making calibration/validation test, log, checklist reports and checksheets for loops.

Rotary Engineering Limited

Project : Saudi Aramco Total Refining and Petrochemical Corp. Project (SATORP)

Saudi Arabia

Employee No. 400236

ID no. 6-17437

Position: Instrument Commissioning Technician

July 27 2012 up to May 15,2013 (Finished Project)

DUTIES AND RESPONSIBILITIES

Perform loop checking, functionality test and commissioning related activities of various types of instruments for flow, level, pressure and temperature.

Calibration and Configuration of different Transmitters using 475 HART communicator.

Perform continuity test and modification of termination from JB to marshaling cabinets (vice versa) prior to wrong termination.

Checking and modification of Smart Transmitters parameters with reference to the instruments data sheets.

Troubleshoot, Functionality test and calibration of different types of valves (control valve, relief valve, on/off valve and motor operated valve)

Loop check and Functionality Test of Fire & Gas (Gas detectors, H2S detector, smoke detector etc.)

Stroking and calibration of Valves using 475 HART communicator

Perform laboratory calibration of PRV, Gauges (Deadweight calibration), and Transmitters etc.

Attend 3rd party (Dresser laboratory) calibration of pressure relief valve.

Perform loop check and functionality test with coordination to DCS operator for simulation and checking and troubleshooting for field instruments.

Clearing the punch list raised by the QC and clients.

Working in the Simultaneous and Corporate area (live line) with proper permits and safety awareness.

Responsible for making calibration/validation test, log and checklist reports.

Permit to Work Coordinator (INSTRUMENT)

(Review Job Safety Analysis, P&ID, SLD, ILD, Wiring Diagram, HAZARD RISK Assessment, Schedules, coordination with safety and seek client’s approval).

Petrol Steel Co. Ltd

Al Jubail, KSA

Position: Instrument Technician (calibration)

February 2009 – June 2011 (Finished Contract)

DUTIES AND RESPONSIBILITIES

Calibration of all instrument before installing in the field

Performs laboratory and field validation/calibration of various types of instruments for flow, level, pressure and temperature.

Performs control valve and safe valves overhauling and valve leak testing (bench).

Coordinates with instrument engineer with regards to the parameters of every instruments in the calibration.

Troubleshooting of faulty instruments.

Performs instrument, electrical works and other duties/functions as required for safe and healthy operation.

Having knowledge of industrial safety rules & regulations, using safety instruments, firefighting equipment, safety precaution and PTW System (safety permits).

RECOGNITIONS

Recognition of the excellent work performed during the COMMISSIONING AND START UP of the HIDES GAS CONDITIONING PLANT, Hela Province, Papua New Guinea. – EXXON MOBIL

Recognition of dedicated service and outstanding performance, contribution to the success of the project HIDES GAS CONDITIONING PLANT, Hela Province, Papua New Guinea. - CB&I

Recognition for dedicated efforts, loyal service and generous gift of talents during the Saudi Aramco Total Refining Petrochemical Project – Rotary Engineering LTD

Recognition as COMMISSIONING INSTRUMENT TECHNICIAN during the Saudi Aramco Total Refining Petrochemical Project –

Award of Excellence - Instrument Technician

Recognition for showing an Exemplary Performance during the conduct of Batch 27, INDUSTRIAL INSTRUMENTATION & PROCESS CONTROL TRAINING COURSE FOR INSTRUMENT TECHNICIAN.

TRAINING EXPERIENCE

CORPORATE WORK PERMIT

Saudi Aramco Total Refining &Petrochemical Co.

December 2012

FIELD INSTRUMENTS CALIBRATION, LOOP CHECKING & FUNCTIONALITY TEST.

Rotary Engineering Ltd.

September 2012

SIMULTANEOUS OPERATIONS (SIMOPS)

Saudi Aramco Total Refining &Petrochemical Co.

September 2012

COMMISSIONING WORK PERMIT WORKSHOP

Saudi Aramco Total Refining &Petrochemical Co.

August 2012

EDUCATIONAL BACKGROUND

Secondary: The Mabini Academy

Lipa City

June 2000 – March 2004

Degree/Level Attained: Bachelor of Science in Instrumentation and Control Technology

Under Graduate

Batangas State University

June 2004 – December 2006

Vocational/Short Course: Industrial Instrumentation and Process Control for Instrument Technician

I&E Industrial System Services Inc. Training Center

August 13, 2011 – March 23, 2012

I&E Compound, 788 Takad Libjo,

Batangas City,Philippines

PERSONAL BACKGROUND

Date of Birth : September 10, 1987

Civil Status : Single

Age : 28 yrs old

Nationality : Filipino

Gender : Male

Religion : Roman Catholic

Height : 5’7”

Languages Spoken : Tagalog and English

Can work under pressure. Creative, responsible, fast learner and hardworking.

REFERENCES

Name Company/Position Contact No.

Mr. Eduardo Layug Instrument Supervisor acwwe7@r.postjobfree.com

(TOTAL Australia)

Oscar Anos-os Jr. Inst. Commissioning Supervisor acwwe7@r.postjobfree.com

(Exxon Mobil Papua New Guinea)

Mr. Raymond Parnis Instrument Comm Lead acwwe7@r.postjobfree.com

HAROLD M. PADURA

INSTRUMENT COMMISSIONING TECHNICIAN



Contact this candidate