Resume

Engineering Manager

Location:

Madrid, Community of Madrid, Spain

Posted:

September 24, 2016

Contact this candidate

Resume:

Curriculum Vitae

PERSONAL INFORMATION González Bravo, Carlos

acwq7c@r.postjobfree.com

www.lycea.es

www.amasi.es

Sex male Date of birth 17/09/1971 Nationality Spanish 003*-***-***-***

https://es.linkedin.com/in/carlosgonzalezbravo

WORK EXPERIENCE

July 2015 - Present Chief Executive Officer (CEO) at A+I Architecture & Engineering, S.L. Co-founding member and Steering Committee Member of company that develops and implements its own patents. Project Manager. Construction Manager.

October 2012 – July 2015 Chief Executive Officer (CEO) at HSO Enthalpy Engineers, S.L. Co-founding member and Steering Committee Member of company that develops and implements its own patent on removable raised floor heating.

2004 - Present

Court Expert at Official Architects Association of Madrid Reporting and ratification certificates rulings, with ratification in the wards of the Courts of Madrid, regarding deficiencies, injury repair and administrative reviews appraisals. 2015 - Present

Court Expert at Official Technical Engineers Association of Madrid Reporting and ratification certificates rulings, with ratification in the wards of the Courts of Madrid, regarding facilities deficiencies, injury repair and administrative reviews appraisals. 1997 - Present

Chief Executive Officer (CEO) at Lycea Architecture & Engineering Project Manager and Construction Manager with over 40000 m2 in many different kind of buildings

(educational, office, commercial, residential, etc). Registered Architect at the Official Architects Association of Madrid nº 12.196. Co-founding member of Lycea Architecture and Engineering, dedicated to Work Execution, Projects, Construction Management, Reports, Rulings, Certifications, controls monitoring, Party Proficiency; in new construction, renovation and Rehabilitation of Heritage and properties undergoing Court claim. With 5 people (variable) contracted in office under my charge. So far 500 interventions in buildings have been developed in the Community of Madrid, Guadalajara, Segovia, Burgos, Palencia and Canary Island, most of them affected by structural pathology. November 2007 – October

2012

Dean of the School of Architecture and Building Engineering at Nebrija University Responsible for the creation of the school. Responsibilities include Academic, Research, and faculty hiring, Marketing and Representing the University in several forums of Engineering and Architecture Management. Supervising the work of 55 employees, and variable between 150 and 1200 students. Writing Academic Curriculum and Head of the MASTERS in Architecture, ANECA approved in 2012, Degree in Architecture Fundamentals, ANECA approved in 2011, titling Degree Architecture, ANECA approved in 2009, Bachelor’s Degree in Building Engineering, ANECA approved in 2008. Course Director Adjustment DEGREE in Building Engineering for Technical Architects and Quantity Surveyors, Nebrija University blended learning, with 1100 students graduate until December 2011 (2008- 2012).

Coordinator of Graphic Expression, Superior Polytechnic School of Engineering and School of Architecture at the Nebrija University in the degrees of Industrial Engineering, Technical Electronics, Technical Engineering in Industrial Design, Industrial Design Degree, Degree in Mechanical Engineering, Bachelor Automobile Engineering, Bachelor in Fine Arts Degree in Interior Design, Architecture Degree, Degree in Foundations of Architecture (2007-2011). Over 7 million euros billed between 2010 and 2012 under my marketing action.

Curriculum Vitae Carlos González Bravo

Lecturer Professor at School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM).

Lecturer at Pathology Buildings Master in: "Reinforcement and Prosthesis Wood Structural Systems”. November 2007 – October

2012

Associate Professor at School of Architecture at Nebrija University Full time Professor in the following subjects: "Theory of Structures and Industrial Buildings" (6 ECTS) in the 5th race of the degree of INDUSTRIAL ENGINEERING, "Analysis of Building Structures " (6 ECTS) in the 3rd race of the Degree in ARCHITECTURE, " Building Structures " (12 ECTS) in the 4th race of the titration DEGREE in ENGINEERING BUILDING "Workshop Design Project I- VIII " (42 ECTS ) in the Bachelor's degree in Blended ARCHITECTURE, " Graphic Expression I "(6 ECTS) in 1st race titling DEGREE IN INDUSTRIAL DESIGN and PRODUCT DEVELOPMENT, " Graphic Expression I "(6 ECTS) in 1st race of the degree of Bachelor in Architecture," Research in Interior Design " in PhD in INDUSTRIAL DESIGN,

"Graphic Design" (6 ECTS) in 1st race titling DEGREE in MECHANICAL ENGINEERING, "Graphic Expression"(6 ECTS) in the 2nd race of the degree of INDUSTRIAL ENGINEERING, " Elasticity and Strength of Material "(6 ECTS) in 2nd race titling in INDUSTRIAL ENGINEERING DESIGN . April 2002 – April 2008

Chief Executive Officer (CEO) Lycea Obras, S. A.

Project Manager. Construction Manager. Running 50 works with (variable) 30 people hired over 50

(variables) outsourced to my office. Responsible for the recruitment of 3 million euros. 1998 –2008

Design and maintenance of web sites

Department of Building and Architectural Technology (DCTA) and Interior Architecture from the School of Architecture of Madrid (ETSAM) of the Polytechnic University of Madrid (UPM) Page. Company homepage Applied Engineering and Architecture (AIA) in 2000. 2006 –2007

Assistant Professor at School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM).

Professor of the course "Professional Architect" in the Department of Building and Architectural Technology

(DCTA).

2001 –2002

Academic Management at Master in Advanced Technology Building (META) of the Higher Technical School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM).

Coordinator of Master telematic contents and website design. 1997 –2002

Asisstant Professor at School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM).

Professor in the following subjects: Buildings Construction IV Seminar (sixth grade, plan 1975) "Computers and Construction", in collaboration with Professor D. Juan Monjo Carrió, "Finished Work" Buildings Construction (fourth-year, plan 1996) in collaboration with professor D. Javier de Cárdenas y Chávarri,

"Building Systems" (first year, 1996 plan), "Image Processing" course Infographic. Department of Building and Architectural Technology (DCTA).

1998 – 2001

Television, Radio and Internet

Program Collaborator Vivir en Comunidad, broadcast live on local Telemadroño chain. Program Collaborator De la noche al día of National Radio of Spain. Support platform on the web with advice to queries of Internet viewers. Object sculpture design awards Vivir en Comunidad 1999. 1998 - 2000

Telematics Advisor at Spanish Architects Colleges Superior Council (CSCAE). Curriculum Vitae

© European Union, 2002-2013 http://europass.cedefop.europa.eu Page 3 / 7 In charge of the following responsibilities at national level: ART / SME Project General Secretariat of the Ministry of Development Communications, with FEDER funds, including Official College of Architects as nodes, and societies of architects such as SMEs. Management, Achievement and Development program for the dissemination of Architecture Competitions based on the agreement between the Superior Council of Colleges of Architects of Spain, Banesto bank agreement. Development and Management in Architecture Competitions dissemination via the Internet. CSCAE Management Server to implement online programs for architects. Telematics Consulting of new telecommunications infrastructure for Colleges of Architects of Spain. Advisory Committees meetings of Technology Assessment (CAT's) in telecommunications. Design CSCAE website.

May 1998 – August 1999

Honorific Municipal Architect City Council in Aldea del Fresno (Madrid) Inspection and supervision of municipal management. 1998

Academic Management of I Technical Conference on Sloping Deck in Cultural Foundation of the Official College of Architects Madrid (FCCOAM). Co-organizer of the conference.

1997 - 1998

Assistant Professor at University San Pablo CEU Architecture. Assistant Professor in Building Construction of 1st, 2nd and 3rd year. 1996 –1999

Representative of the Spanish Architects Colleges Superior Council (CSCAE) in the exhibition stand SIMO TCI.

Collegiate attention and institutional relationships at trade fairs, for four running years in the stand INPROSIMO (SIMO Information Professional) available to the Council. 1994 -1997

Structural Calculus freelance

Apartment building, home and garage, C / Juan Elorza, 29 (Madrid). Family house in RACE (Madrid).

Housing, C / Noruega 69, 71, Villalvilla (Madrid). Concrete structure calculation of Health Center at Parque de Comibra, Móstoles, for the architect Andrés Perea in 1996.

Quality Control of structural design program for the book Computer Calculation of reinforced concrete structures prior to his editions of 1994, 1996 and 1997, McGraw Hill. 1993 - 1997

Assistant Professor in Design Architectural Software Training courses in AutoCAD, Arris and Microsoft Office to teachers and students of the Architecture School of Madrid (ETSAM). Collaborator at Master in Computer for Architecture, Urbanism and Estate Management

(MIA), in the area of Facility Management, ETSAM.Organizer PhD course "Lighting Design and CAD", Department of Building and Architectural Technology (DCTA) ETSAM, UPM (1994-1995). 1993 - 1995

Fellow at Computer Center, Architecture School of Madrid (ETSAM) Exercising duties of attention to material and programs of the Centre, managing their use and access by ETSAM students and teachers, for two years.

1990 - 1998

Technical Drawing

Delineation of projects for architects with AutoCAD; freelance, outsourcing up to 10 colleagues to deliver during the course and during holiday periods.

Curriculum Vitae Carlos González Bravo

2011 - Present PhD Industrial Engineering (In course) FHEQ level 8 High Technical School of Industrial Engineering. National Distance Education University (UNED), Spain.

2011 - 2016 Industrial Engineer FHEQ level 8

High Technical School of Industrial Engineering. National Distance Education University (UNED), Spain. Excellent Final Grade (10).

2013 - 2016 English FHEQ level 6

University Center for Distance Language (CUID), National Distance Education University (UNED), Spain.

English C1 in progress.

2012

Accreditation by for and Accreditation & Quality Assessment national Agency (ANECA)

FHEQ level 8

Accredited by ANECA like Assistant Doctor.

2012

Accreditation by the Accreditation, Planning & Quality Agency of Madrid Universities (ACAP)

FHEQ level 8

Accredited by ACAP like Assistant Doctor.

2010 - 2011

Graduated in Mechanical Engineering

FHEQ level 6

High Polytechnic School of Engineering. Universidad Nebrija, Madrid, Spain. 2005 - 2010

Technical Industrial Engineer

FHEQ level 5

High Technical School of Industrial Engineering. National Distance Education University (UNED), Spain.

Specialty in Mechanics, Honors degree in Final Project. 2004 - 2007

Ph.D. in Architecture

FHEQ level 8

High Technical School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM), Spain.

Building Technology Construction Department. Thesis Title: "Upgrading of the mechanic capacity in wood pieces in bending in ancient structures by the upper side with reinforcement and metallic prosthesis." Excellent Cum laude unanimously.

2001 - 2002

Master in Advanced Technology Building

FHEQ level 7

High Technical School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM), Spain

Building Technology Construction Department, 51 credits. 1998 - 1999

Expert in Reinforced Concrete Structures

FHEQ level 7

School of Technical Engineering (EUITOP), Polytechnic University of Madrid (UPM), Spain Course of 13 credits.

1990 - 1996

Architect

FHEQ level 6

High Technical School of Architecture of Madrid (ETSAM), Polytechnic University of Madrid (UPM), Spain. Presentation of Degree Project on May 1997, average grade of goo Curriculum Vitae

Patents (10)

• “Thermal Socket for connecting and disconnecting of removable radiating elements in any plane of space”. Passed the Report on the Prior Art.

• "Radiant ceiling system, removable, by fastening systems distributor fluid”. Passed the Report on the Prior Art.

• “Mixed system of automatic fire and radiant roof ”. Granted.

• “Overlaid heating floor system, prefabricated and removable”. Granted.

• “Airtight connector for peritoneal dialysis”. Granted.

• “End piece of cold formed steel to reinforcement beams and floor joists, deck pairs, studs and other wood structural elements”. Granted.

• “Metal connector for connecting wood-concrete composite structures". Granted.

• “Hanging floor heating system, prefabricated and removable”. Granted.

• “Raised heating floor system, freestanding, prefabricated and removable on fluid distributor carriers.” Granted and selled. Trading application.

• “Rolled steel reinforcement system”. Granted. Exploited by the company Lycea Obras, S. A. and Lycea Architecture & Engineering.

Publications

• 2015: “Hypothesis of Stele and Collision Effects in a Narcissistic Teaching Model; and Psychophysiological Record in Students, Provided by Emotional Learning Method (ELM)”. October 14 - 16, 2015, Madrid, Spain. International Conference on Knowledge, Innovation and Competitiveness (CINAIC 2015).

http://www.dmami.upm.es/dmami/documentos/liti/Actas_CINAIC_2015.pdf

• 2013: “Implications of Emotional Learning Method (ELM) in Adult University Education. Research Trends in Safety and Confidence in Architecture.”. November 6 - 8, 2013, Madrid, Spain. International Conference on Knowledge, Innovation and Competitiveness (CINAIC 2013). http://www.dmami.upm.es/dmami/documentos/liti/ACTAS_CINAIC_2013.pdf

• 2012: Legal Architecture (1ª E D.) ML Editions. ISBN 978-84-89150-94-2.

• 2012: “Cold Formed S250GD+Z Steel Cross Section Profile for Timber Upgrading”. Metal Forming, Special Edition, 14th International conference of Steel Research.

• 2012: Guía de viaje para un arquitecto: ruta Chicago - Nueva york (3ª ed.) Editorial Munillalería. ISBN 978-84-89150-93-5.

• 2011: Guía de viaje para un arquitecto: ruta Chicago - Nueva york (2ª ed.) Editorial Mairea ISBN 978-84-92641-71-0.

• 2011: “Steel Profiles for Repairing Deteriorated Timber Beam Ends”. Informes de la Construcción Vol. 63, nº 521 (2011) pp. 37-45, doi: 10.3989/ic.10.004 ISSN: 0020-0883.

• 2011: "Approaching an Emotional Learning Method (ELM) in Architecture teachings ". Arbor, Vol 187, Nº Extra_3 (2011) doi: 10.3989/arbor.2011.Extra-3n3154.

• http://arbor.revistas.csic.es/index.php/arbor/article/view/1436

• 2011: "Approaching an Emotional Learning Method (ELM) in Architecture teachings ". September 26 - 28, 2011, Madrid, Spain. In: A. Fidalgo y M. L. Sein-Echaluce, eds., I International Conference on Knowledge, Innovation and Competitiveness. (CINAIC 2011), pp. 141-146.

• http://www.dmami.upm.es/dmami/documentos/liti/Actas_CINAIC_2011.pdf

• 2011: "Burgos Cathedral Climate Control". Arte y Cemento. September 2011, No. 2130, p. 106-107.

• 2011: “Sustainable Rehabilitation in the Recovery of Timber Floors”. Detail Nº 1. pp. 78-81.

• 2010: Guía de viaje para un arquitecto: ruta Chicago - Nueva york (1ª ed.) Editorial Mairea ISBN 978-84-92641-67-3.

• 2010: “Reinforcement wooden beams using metal profiles in the upper face”. Materiales de Construcción Vol. 60, nº 298 (2010) pp. 123-135. doi: 10.3989/mc.2010.47408.

• 2010: “Floors Repairing on the Upper Side”. Arte y cemento Nº 2117, pp. 64. ISSN 0212- 8578.

• 2009: “Recovery Timber Floors through Reinforcements and Metal Prostheses”. Cercha, Consejo General de la Arquitectura Técnica de España. Nº 101. Octubre de 2009. pp. 76- 81.

• 2008: “Bending reinforcement of wooden beams with steel cross sections” June 2008. Miyazaki, JAPAN. 10th World Conference on Timber Engineering WCTE 2008

• 1997: “Standard for Installation of Concrete Tiles Sloping Deck”. AENOR UNE 127.100.

• 1992 - 1994: Collaborator in the book: Differential Geometry. Applications in Architecture, by Professor Carlos Alfonso Casal Piga, Department of Mathematics, Escuela Técnica Superior de Arquitectura de Madrid (ETSAM), Universidad Politécnica de Madrid (UPM), Spain.

Curriculum Vitae Carlos González Bravo

Moderator

Research Projects

Projects

• 2016: Oral communication: “Stele, Venus and Collision Effects. Personal Magnetic Spectrum Model. Emotional Diagnosis as Educational Innovation System in University Teaching for of Architectural Project Workshop. State of the Thesis”. Junio 15-16, 2013, Madrid. VIII Networks of Research in Educational Innovation at the National Distance Education University (UNED), Spain.

• 2015: Oral communication " Hypothesis of Stele and Collision Effects in a Narcissistic Teaching Model; and Psychophysiological Record in Students, Provided by Emotional Learning Method (ELM)". 14 to 16 October 2015, Madrid, Spain. International Conference on Knowledge, Innovation and Competitiveness (CINAIC 2015).

• 2015: “When the cathedrals were cold”. 25 February 2015, Madrid, Spain. Foro Clima

(HVAC Fair of IFEMA). http://www.ifema.es/climatizacion_01/JornadasTecnicas/index.htm

• 2013: Oral communication "Implications of Emotional Learning Methodology (ELM) in University Adult Education. Safety and Confidence Research Trends in Architecture", 6 to 8 November 2013, Madrid, Spain. International Conference on Knowledge, Innovation and Competitiveness (CINAIC 2013).

• 2012: Oral communication, 12th World Conference on Timber Engineering WCTE 2012,

“Reinforcement of Deteriorated Beam Ends with Steel Profiles and Simulated by FEM” July 2012, Auckland, NEW ZEALAND.

• 2011: Oral Communication "Approaching an Emotional Learning Method (ELM) in Architecture teachings”. 26 to 28 September 2011, Madrid, Spain. International Conference on Knowledge, Innovation and Competitiveness (CINAIC 2011).

• 2011: Oral Communication, MESIC 2011. “Cold Formed Steel Cross Section Profile for Timber Upgrading” (MESIC 2011), Cádiz, España.

• 2010: Oral Communication, 11th World Conference on Timber Engineering WCTE 2010,” In situ non-destructive density estimation for the assessment of existing timber structures bending reinforcement of wooden beams with steel cross sections” May de 2010. Trentino, ITALY.

• 2008: Oral Communication 10th World Conference on Timber Engineering WCTE 2008

“Bending reinforcement of wooden beams with steel cross sections” June 2008. Miyazaki, JAPAN.

• 2007: Oral Communication, III Iberoamerican Congress of forest products CIPF 2007,

“Upgrading Wooden Structures in Ancient Buildings. Application of Reinforcement and Metal Prostheses on the Upper Side” July 2007. Puerto Madero, Buenos Aires, ARGENTINA.

• 2000: Oral Communication, 12th International Brick/Block Masonry Conference IBMaC 2000, “Contribution of Murfor Diagonal in Buckling of DCW Walls Tested in Spain” June 2000. Madrid, SPAIN.

• 2000: Oral Communication 12th Internacional Brick/Block Masonry Conference IBMaC 2000, “Tests in Capuchin Horizontal Bending Walls Armed by Bed Joints” June 2000. Madrid, SPAIN.

• 2012: Conference moderator of Filmmaker and Architect, Fernando Colomo, on the inauguration of the School of Architecture at the Antonio de Nebrija University on October 5.

• 2011: Organizer and moderator of the Day of Sustainability in Architecture on March 30, at the Antonio de Nebrija University.

• 2011: Organizer and moderator of the architect Ignacio Vicens Conference on the inauguration of the School of Architecture at the Antonio de Nebrija University on October 7.

• 2009: Organizer and moderator of the Third Conference of Interior Design and Furniture: natural and artificial lighting on March 30, 2009, at the Antonio de Nebrija University.

• 2008-2011: NATIONAL RESEARCH PROJECT PLAN I + D + i BIA 2010-18858, applet Basic Research Projects "For Nondestructive Structural Classification of Wood in New Construction and Rehabilitation Techniques", Ministry of Science and Innovation. Researcher. Dedication 50%, ETS Forestry Engineers UPM.

• 1997-2000: NATIONAL RESEARCH PROJECT PLAN R & D in MAT95-0140-C03-02, subproject 2 "New Technical Features of the Bed Joints in Reinforced Masonry Walls Subjected to Lateral Loads", Ministry of Industry. I Scholarship. Dedication 50% ETSAM, UPM.

500 building interventions, ask "Annex I" for list of references, including projects in Spanish Heritage like the Wall of Madrid (S XI), Burgos Cathedral (S. XIII), Vitoria Cathedral (S XII), and and several buildings of historic nineteenth century of Madrid. Curriculum Vitae

Madrid, July de 2016

Courses

• 2013: Course of Technical Inspection of Buildings 15 hours, taught at the Official Technical Architects and Building Engineers Association of Tenerife (COAATIE) on 20, 21 and 22 May.

• 2013: Course on Energy Efficiency approved by the Ministry of Industry CE3X 12 hours, taught at the Official Technical Architects and Building Engineers Association of Malaga on 25 and 26 April 2013 tool.

• 2013: Course of Technical Inspection of Buildings 15 hours, taught at the Official Technical Architects and Building Engineers Association of Tenerife (COAATIE) on 16, 17 and 18 April.

• 2012: Course on Energy Efficiency approved by the Ministry of Industry CE3X 15 hour’s tool, taught at the Official Technical Architects and Building Engineers Association of Tenerife (COAATIE) on 13, 14 and 15 December, 2012. Course on Energy Efficiency approved by the Ministry of Industry CE3X 15 hour’s tool, taught at the Official Technical Architects and Building Engineers Association of Tenerife (COAATIE) on days 10, 11 and 12 December, 2012.

Conferences

Memberships

Software

• 2012: Opening Keynote Course of the School of Architecture at the Antonio de Nebrija University entitled " Current Architecture vs Traditional Architecture" on 5th October. Madrid, Spain.

• 2008: Wood, December 12, 2008, entitled "The relationship between design and the existing structure” in the Antonio de Nebrija University: Framed by the Second Conference of Interior Design and Furniture Conference. Madrid, Spain.

• 2007: Conference repair wooden structures with metal parts in the CIS WOOD course organized by the Department of Housing and Floor. Xunta de Galicia. October 2007. Santiago de Compostela, Galicia, Spain.

• 2002: "Healthy Building. Hazardous Materials. "September 2002. Masters in Environment and Bioclimatic Architecture (MAYAB) of the School of Architecture (ETSAM) of the Polytechnic University of Madrid (UPM), Spain.

• 1999: Architecture Conference and the Latest Computer Technologies Course, DCTA, ETSAM, UPM.

• 1998: Rehabilitation Conference of the pitched roof. Rules I Technical Conference on the cover Leaning on COAM Cultural Foundation.2002: "Healthy Building. Hazardous Materials". September 2002. Master in Environment and Bioclimatic Architecture (MAyAB), Escuela Técnica Superior de Arquitectura (ETSAM), Universidad Politécnica de Madrid

(UPM), Spain.

Official Architects Association of Madrid nº 12.196 College of Industrial Technical of Madrid nº 23.752 Official Architects Association of Castilla La Mancha nº 11.112 CAD: Arris, Microstation, AutoCAD.

BIM: Revit

PPM: Primavera P6

Mechanical Design: SolidEdge, SolidWorks.

Finite Element Method: Cosmos, Femap NASTRAN, SolidWorks. Design: SketchUp, PhotoShop

Others: Microsoft Office (Word, Excell, Power Point), Photoshop. Mother tongue Spanish

Other languages UNDERSTANDING SPEAKING WRITING

Listening Reading Spoken interaction Spoken production English C1 C1 B2 B2 C1

B1, B2 & C1 (C1 in progress), University Center for Distance Language (CUID), National Distance Education University (UNED), Spain.

Levels: A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user Common European Framework of Reference for Languages

Contact this candidate