Engineering Designer
Resume:
Personal Data Sheet
STEVEN D. HENRY
Piping Designer
Winthrop, Maine 04364
207-***-**** (H)
207-***-**** (C)
(*********@*****.***)
SUMMARY OF WORK EXPERIENCE:
Thirty years experience in mechanical design with 22 years emphasis
in industrial process and marine piping design.
SKILLS:
Software: AutoCad R2013, AutoDesk INVENTOR Release 10, SOLIDWORKS 2009 AutoCad Land Development AutoCad Mechanical Desktop, REBIS Pro-Pipe Pro-ISO, and
Pro-Plant, CADWORX 2011, CADDS5, CATIA V5
Hardware: IBM PC with Windows 98, Millennium, XP, and Windows 7 operating systems. Wild T1000 Total Station Theodolite along with Allegro CE data collector.
EMPLOYMENT RECORD:
GENERAL DYNAMICS, Bath Iron Works, Bath, Maine
Marine Piping Designer. June, 2013 to May, 2016.
Responsibilities included, but not limited to, developing piping
systems for DDG 1000 Zumwalt class destroyers, utilizing
CATIA V5 design and modeling software system.
TOTAL Technical Services, Waltham, Massachusetts.
Piping Designer. March 2013 to May, 2013.
Contracted to POLARIS Engineering, Lake Charles, Louisiana.
Responsibilities included, but not limited to, developing
system piping models for various plant systems for a petroleum refinery
utilizing CADDWorx 3D and AutoCad 2013. Models were developed from
extensive system walkdowns and field research, Routing proposed piping
systems and equipment location
EMPLOYMENT RECORD (Cont.)
Engineering Help Network, South Easton, Massachusetts.
Piping Designer. August, 2012 to February, 2013.
Contracted to C & I Engineering, Louisville, Kentucky.
Responsibilities included, but not limited to, developing
system piping models for various plant systems for a petroleum refinery
utilizing CADDWorx 3D and AutoCad 2013. Models were developed from
extensive system walkdowns and field research, Routing proposed piping
systems and equipment location.
Technology Plus, Inc., Lee’s Summit, Missouri.
Piping Designer. August, 2011 to December, 2011.
Contracted to Quality Execution Engineering, Mt. Vernon, Indiana.
Responsibilities included, but not limited to, developing
system piping models for various plant systems for a plastics plant
utilizing CADDWorx 3D and AutoCad 2010. Models were developed from
extensive system walkdowns and field research.
GENERAL DYNAMICS, Bath Iron Works, Bath, Maine
Marine Piping Designer. March, 2010 to July, 2011.
Responsibilities included, but not limited to, developing piping
systems for DDG 51 Arleigh Burke class destroyers, utilizing
CADDS5 Unix based design and modeling software.
Kelly Technical Services, Auburn, Maine.
Piping Designer. November, 2009 to February, 2010.
Contracted to IES Corporation, Bristol, United Kingdom.
Responsibilities included, but not limited to, reverse engineering
biomechanical manufacturing equipment to develop electrical,
hydraulic, and pneumatic schematic diagrams to meet European
Union specifications utilizing AutoCad R2002.
EMPLOYMENT RECORD (Cont.)
CADstar International, Andover, Massachusetts.
Piping Designer. January, 2009 to May, 2009.
Contracted to Tri-Mont Engineering, Braintree, Massachusetts. Responsibilities
included but not limited to design and layout of piping systems and supports
for a large, multi tank asphalt storage and terminal facility in Portsmouth,
New Hampshire, utilizing AutoCad R2009.
Mid-State Technical Services, Davenport, Iowa
Lead Piping Designer. October, 2008 to January, 2009.
Contracted to Northwest Mechanical, Inc., Davenport, Iowa. Responsibilities include but not limited to design and layout, and 3D modeling of piping systems, for a large Ethanol plant in Cedar Rapids Iowa. System design utilized AUTOCAD R2009 and Navisworks.
Also supervised CADD technician in development of piping fabrication drawing.
National Engineering Service Corporation, Portsmouth, New Hampshire
Piping Designer. October 2007 to June, 2008.
Contracted to IDEA, Inc., Mt. Vernon, Indiana.
piping, using field sketches, Isometric drawings, and 2D general assemblies, using CADWORX software.
National Engineering Service Corporation, Portsmouth, New Hampshire
Piping Designer. October 2007 to June, 2008.
Contracted to R.G. Vanderweil Engineering, Boston, Massachusetts.
Responsibilities included, but not limited to design and layout of piping sub-systems for a HVAC system for a large exposition and conference center in Las Vegas, Nevada.System piping included chilled water, condenser water, boiler feed and return water. System designed utilizing AutoCad R2006 2D and 3D features.
TAC Worldwide Companies, Dedham, Massachusetts
Assistant Project Design Lead / Piping Designer. September 2006 to August 2007.
Contracted to Babcock Power Engineering, Inc. Worcester Massachusetts.
Responsibilities included, but not limited to development and distribution of project data between client company and subordinate suppliers and vendors, checking and maintaining isometric piping drawings, general arrangement drawings, and piping and instrumentation diagrams based upon company process and piping specifications. Other duties were scheduling, arranging and overseeing regular client and vendor WEBEX teleconferences and conference calls, generating reports based on meeting results, while keeping senior project managers and engineers current on project issues.
EMPLOYMENT RECORD (Cont.)
Woodard & Curran Engineering, Portland, Maine
Piping Designer / CAD Operator. May 2006 to August 2006.
Responsibilities included the development of piping system renovation design and layout for an 110,000-gallon fuel oil storage system for VA Administration Hospital heating system using AutoCad R2006 software.
TRIAD Engineering Corporation, Burlington, Massachusetts
Piping Designer / CAD Operator. August 2005 to October 2005.
Contracted to Smith & Norrington Engineering, Auburn, New Hampshire. Responsibilities included the development of piping & instrumentation diagrams for a natural gas and liquid petroleum gas distribution center using AutoCad R2002 software.
Pine Tree Engineering. Bath, Maine.
Survey Instrument Operator / Drafter. October 2003 to April 2005.
Responsibilities include topographic land surveying for municipal road improvements, utilities, and site development using Wild T1000 total station theodolite along with Allegro CE data collector. Also the development of road plans and profiles using AutoCad R2000 and AutoCad Land Development.
CHI Engineering Services, Inc. Greenland, New Hampshire.
CAD Designer. August 2002 to February 2003
Responsibilities included design and development of system piping for natural gas transmission and metering stations, field inspection of piping supports, foundations, and connections both above and below grade. Developed electrical schematics, ladder logic diagrams, and cathodic protection plans.
National Engineering Service Corp. Portsmouth New Hampshire
Piping Designer / Field Engineer. December 2001 to August 2002
Contracted to Harding & Smith, Inc. Walpole, Massachusetts, and Limbach Corporation, Londonderry, New Hampshire. Responsibilities included documentation and inspection of multiple piping systems for a gas turbine power co-generation plant, field engineer for general system inspection for plant commissioning.
Tech/Aide, Auburn, Massachusetts
Mechanical Designer/Draftsman. April 2001 to September 2001
Contracted to Babcock Borsig Power, Inc., Worcester, Massachusetts. Responsibilities included design and development of structural steel and sheet metal fabrication drawings for boiler stack exhaust catalytic converters under EPA Clean Air Act guidelines Using AutoCadR2000.
Dirigo Engineering, Waterville, Maine
Civil Draftsman & Survey Instrument Operator. August 2000 to March 2001
Responsibilities included development and checking of municipal utility plan and profile drawings using AutoCAD R2000. Total Instrument theodolite survey instrument operation for land surveying.
EMPLOYMENT RECORD (Cont.)
Universal Resources, Inc., Duluth, Georgia.
Piping Designer. May 2000 to July 2000.
Contracted to Agra Simons, Inc., Decatur, Georgia. Responsibilities included generation of utilities piping drawings, P&ID field verification and revision for a gas turbine electrical power generation plant.
Required use of both AutoCad R14 and 2000.
Aerotek, Inc., Knoxville, Tennessee.
Mechanical Designer/ Draftsman. January 2000 to May 2000.
Contracted to Asea, Brown, & Bovery (ABB), Inc., Chattanooga, Tennessee. Responsibilities included generation of structural and sheet metal detail drawings for fossil fuel electrical generation facilities duct work, and supporting structures, using AutoCad R14.
Universal Resources, Inc., Duluth, Georgia.
Piping Designer. September 1999 to November 1999.
Contracted to Dean Oliver, International, Atlanta, Georgia. Responsibilities included process piping design, and P&ID field verification for a pigment fabrication plant using AutoCad R14.
Ideal Technical Services, Inc., Mobile, Alabama.
Piping Designer. December 1998 to May 1999.
Contracted to Ford, Bacon & Davis, LLC. Baton Rouge, Louisiana. Responsibilities included development of isometric, and fabrication drawings for a spent catalyst metals recovery plant using AutoCad R13 and Pro Pipe and Pro Iso software.
National Engineering Service Corp, Houston, Texas.
Electrical/Instrumentation design draftsman. April 1998 to August 1998
Contracted to Process Systems, Incorporated, Memphis, Tennessee. Responsibilities included the creation and correction of site grounding plans, power distribution plans and details, and motor schematics for a food products processing plant using AutoCad R13.
Svedala Industries, Birmingham, Alabama
Mechanical Design Draftsman. June 1997 to April 1998.
Responsibilities include design, layout, and development of large capacity industrial pump castings, as well as mining and quarrying equipment using AutoCad R14.
Associated Staffing, Inc., Roswell, Georgia
Electrical/Instrumentation design draftsman. February 1997 to June 1997.
Contracted to Process Systems, Incorporated, Memphis, Tennessee. Responsibilities included the creation and correction of site grounding plans, power distribution plans and details, and motor schematics for a food products processing plant using AutoCad R13.
EMPLOYMENT RECORD (Cont.)
Technicore Professional Services, Huntsville, Alabama
Mechanical design draftsman. December 1996 to February 1997.
Contracted to Brown International Engineering, Huntsville, Alabama.
Responsibilities included development of prototype drawings of communications equipment panels for U.S. Army using MIL-STD-100E, and ANSI Y14.5M-1992 and AutoCad R13.
Coast To Coast Temporary Services, Tucker, Georgia
Piping/structural steel designer. July 1996 to October 1996.
Contracted to Hydro-Chem Engineering, Holly Springs, Georgia. Responsibilities included the design of process piping systems and structural steel frames and supports for packaged, skid mounted, hydrogen generation units using AutoCad Release 12 with Pro-Pipe and Pro-Iso add-on software
Nesco Service Corporation, Overland Park, Kansas
Piping/plumbing designer. November 1995 to March 1996.
Contracted to Rust Engineering, Birmingham, Alabama. Responsibilities included design of process plumbing systems to include floor and roof drainage, isometric and orthographic plumbing plans, using AutoCad Release 13.
EMC, Incorporated, Muscle Shoals, Alabama
Mechanical Designer. August 1995 to November 1995.
Contracted to Reynolds Metals Company, Muscle Shoals, Alabama. Responsibilities included design and rework on pouring troughs for aluminium melting furnaces,
EDUCATION:
CADDEdge – Londonderry, New Hampshire
November, 2009
Completed course for SOLIDWORKS Essentials.
Middle Tennessee State University - Murfreesboro, Tennessee
July 1977 to December 1979
Graduated with Bachelor of Fine Arts Degree in Commercial Art with minors in photography and graphic communications. Commissioned Second Lieutenant, U.S. Army Field Artillery.
University of North Alabama - Florence, Alabama
August 1975 to May 1977
Two years commercial art emphasis and general course requirements.
Contact this candidate