René O. Treviño’s

Résumé

René O. Treviño

Munster, Indiana

EDUCATION and TRAINING

Federal Aviation Administration (FAA), National Aviation Authority (NAA), class three pilot’s license 2011 OSHA 30 and 20 hour training, 2012

Massachusetts Institute of Technology (MIT), open course work 2008 Indiana test code 5710, 5720, 5730 Praxis licensure 2007 Indiana test code 1010 school leaders licensure 2008 Indiana test code 1020 school superintendent assessment 2008 Ph.D. A.B.D., Capella University Higher Education HR Leadership 2007 Catholic Minister Steward Training New Beginnings St. Thomas More Church, Munster, Indiana 2007 501C3 Organization Training Prairie State College, Chicago Heights IL 2006 Catechist Virtus Training, St. Thomas More Church, Munster, Indiana 2006 Master Business Administration, Technical Management (MBA/TM) University of Phoenix, 2004 Master Business Administration, E-Business, (MBA/EB) University of Phoenix, 2004 Bachelors of Science, Information Technology, Client/Server (BSIT), Devry University, 2003 Inspector Planner Training, Vibration Analysis, LASER Computer Alignment for rotating equipment and static equipment, Work Order Systems, Lubrication Technology Training, Supply Chain Asset Management, 2003 Chem-tool - Crystal Lake IL. 2003

Bachelors of Science, Business Administration (BSBA), University of Phoenix, 2001 New York Film Academy, Hollywood, CA, 2001

PADI certified rescue diver, Master diver in training 2003 Mechanical/ Architectural Engineering Technology Associate Degree, Computer Aided Design (CAD) and Animation Purdue 1997

ESCO Institute Universal refrigerant certification 1995 Multi-craft Mechanic Apprentice School, (plumbing, hydraulics, rigging, pumps, mechanical installations, Crane Machinist) East Chicago, Indiana 1975

Automotive Mechanic/ Hand Drawn Drafting Training, Electronics, Machining, Welding, Hammond Technical Vocational High School 1973

PROFESSIONAL EXPERIENCE

RT2D.LLC CEO; Munster, Indiana (1991-present)

State of Indiana Air permitting, construction release permits, Extensive technical report writing and equipment design experience

René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Designed recuperative venting system for powdered products Conveyor design for coal transfer

Ground penetrating Radar (GPR), subterranean utility location, plumbing and pipeline locations Trained with Dr. Randy Pauch’s last lecture Alice Animation software at Carnegie Mellon University Consulted with Dr. Larry Gritz on his dissertations “Genetic Programming Evolution of Controllers” Implemented Oracle/ People-soft/ SAP, supervisory control and data acquisition (SCADA) delivery, Information Technology Supply Chain Design and Management

Human resources; Audits compensation plans to include life insurance, medical, vacation, and profit sharing, 401K plans Real estate administration, hiring of contractors and employees Plant, Facility Structural steel, plumbing pipe Designs Plant Design Management and HVAC, Oracle Peoplesoft/ SAP Consultant, Enterprise Asset Management (EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources

Oracle People Soft/ SAP Consultant, Enterprise Asset Management (EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources

Designed Aquatic center, Structural steel Building design Web development/ Enterprise Architecture with Marketing/ Sales Strategies Pipe Data recovery for BP East Chicago

Computer aided design architectural, mechanical, electrical, electronics, computer technologies Information technologies, de-mineralizing water treatment and filtration, web designs business contract fulfillment and deliverables

Subaru manufacturing directed and conducted final inspection of Toyota automobiles using Toyota manufacturing training, Kaizen, Kanban continuous improvement systems and lean manufacturing methodologies Supply Chain Design Management and Maintenance Solutions, online educator. Mechanical, Electrical, Civil and Architectural engineering (MECA) (08/2012-05/2014) Underground plumbing and pipe casements, weld specifications, pipe corrosion protections for rail upgrades CN railroad Gary, Indiana

Moved manufacturer to new location, designed venting system and personally completed state construction permitting for all equipment

State of Indiana Air permitting, construction release permits Project Manager, Mechanical, Electrical, Civil and IT Architectural designs and installations, hiring of contractors and employees

Moved major company from Lake County to Porter County, completed necessary Indiana Department of Environmental Management submission for air permitting, designed Hybrid recovery system for product recapture and reuse Designed Fiber Optics and supervisory control and data acquisition (SCADA) delivery for Lake County municipal utilizations

René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Ground penetrating radar (GPR) for major steel producer expansion Aerotek

Creation of fire protection plumbing device using Autodesk Inventor and AutoCad, FEA. (11/2015/05/2016) Ivy Tech College (08/2015)

Teaching electronics, C++ programing, Hydraulics and Programmable Logic Controllers (PLC) Henry Ford Community College (04/2012-06/2012)

Hydraulic training and continuous improvement planning for future projects Severstal (11/2011-03/2012)

Created plant hydraulic pipe and plumbing designs for mechanical and electrical, robotic marking and banding training, Extensive technical report writing and equipment design. Computer Aided design (CAD) examples in solid models and animation, Oracle People Soft/ SAP Consultant, Enterprise Asset Management (EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources ThyssenKrupp (7/2010-11/2011)

Second largest construction site in the world, SAP, Share Point commissioning, ISO, equipment, Extensive technical report writing, equipment plumbing designs, acid reclamation, de-mineralizing water treatment and filtration, procedure writing with continuing responsibilities including plant startup for Information Technologies, Infrastructure, Hot Strip, Cold Strip, Hot Dip Galvanizing and Industrial Training. Oracle People Soft/ SAP Consultant, Enterprise Asset Management

(EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources ESW INC. (7/2008-present)

Consultant Plant Start Up and Operations, Training, CAD architectural, mechanical, plumbing, electrical, electronics, computer technologies, technical report writing and equipment design, procedure writing with continuing responsibilities including plant startup for Information Technologies, Infrastructure, Hot Strip, Cold Strip, Hot Dip Galvanizing and Industrial Training. Enterprise Asset Management (EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources

Devry University

Visiting Professor Online educator, Academic Services & Counseling provided leadership and support to the faculty, administrators and staff (9/2007-present)

Walden University (9/2007-5/2008)

Online educator, Academic Services & Counseling provided leadership and support to the faculty, administrators and staff University of Phoenix (6/2006-5/2008)

Online educator, Academic Services & Counseling provided leadership and support to the faculty, administrators and staff Axia College of the University of Phoenix (9/2006-5/2008) Online educator, Academic Services & Counseling provided leadership and support to the faculty, administrators and staff Westwood College (1/2004-5/2006)

Taught computer animation, rapid web development, Oracle People Soft/ SAP Consultant, Enterprise Asset Management

(EAM), Supply Chain Design and Management, Plant, Facility Structural, Human Resources East Chicago Contractors Association/ Indiana Contractors Association (10/2006-5/2007) René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Vice president of Operations, employment training 501c3 organization Human Resource Development for computer aided design architectural, mechanical, electrical, electronics, computer technologies, information technologies, web designs Fujitsu Consulting (9/2006-02/2007)

Oracle/ SAP Consultant, Enterprise Asset Management (EAM), Supply Chain Design and Management, Plant, Facility Structural steel and Pipe Designs (PDMS), Plant Design Management Systems (PDMS), Human Resource Information System (HRIS) Asset Performance Management (APM), Reliability Centered Maintenance (RCM), facility management solutions, Structural steel designs, HVAC, Discrete Manufacturing, Material Resource Planning (MRP), Plant Design Management (PDMS), Information Technologies, Information Technology audits E- Business, Strategic Planning/ Analysis, Financial consulting, Acquisitions/ Joint Ventures, Delivering Significant Financial Results, Supply Chain Design and Management, Web/Enterprise Architecture SDLC based designing, Computer Information Systems, computer aided design architectural, mechanical, electrical, electronics, computer technologies, information technologies, web designs, logistics and computer aided design work flow, Occupational Safety and Health Administration (OSHA) experienced in injury prevention, job safety, Project Management, Maintenance Inspection and Planning, Supply Chain Design, Web/Enterprise Architecture SDLC based designing

Brown Mackie College (1/2004-3/2006)

Academic chair, Director of Accounting, Business Management, Information Technology Educational division providing strategic planning of Human Resources, business practices, sales, administration of faculty and education daily operations. Online E-business education integration manager instituted training online and in person, Information Technology audits, provided SDLC schema for information storage and content. Installed Local Area Network 225 internet network clients experienced slowness of operations. Investigated Hewlett Packard hardware, advised the CIO regarding the concerns, and wrote document indicating possible solutions and remedies. Result: Used RCM and EAM analysis replaced HP switch with Cisco products – upgraded system to industry T1 and wireless standards.

Communicated business structure, future computer needs and consolidation recommendations to CEO, CIO of EDMC- result EDMC sold 3.4 billion to private equity firm of Providence Equity Partners and Goldman Sachs Capital Partner. Presented informational seminars to Program Action Committee (PAC), Project Management groups. Introduced issues that the campus had concerning programs that were not utilized by students, personally organized PAC meetings onsite luncheons and had 85% turn out, and gathered all information on PAC member’s recommendations advised staff during a director’s program action meeting. Result: Reduced costs at Brown Mackie College by 22%. Introduced Radio Frequency Identification (RFID), Voice over Internet Protocol (VOIP) laptop Architecture for future needs assessments.

Created supply channel logistics degree, and radiology degree proposal Taught computer aided design architectural, mechanical, electrical, electronics, computer technologies, information technologies, web designs

Hammond Redevelopment Committee (1988-2002)

Worked on committee that implemented tax abatement, casino revenue planning, business development and strategic planning for Hammond Indiana, Honorable Duane Dedelow mayor Arcelor Mittal Inland Steel Company (1973-2003)

Engineering Maintenance Inspector Planner Division; East Chicago, Indiana Inspector Planner Project Management at a major producer of steel products in East Chicago, Indiana location hot rolled division. Engineered Planned and led projects in quality assurance Supply Chain Design and Management that analyzed and scheduled procurement, inspections in hot and cold rolling facilities of critical turbine component high technology René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Equipment, designed retrofit of Structural steel designs, electrical and mechanical systems, Extensive technical report writing and equipment design.

Engineered HVAC equipment design, large heavy duty pump hydraulic accumulator systems and plumbing and pipe stress analysis using finite element analysis (FEA) Bayesian statistics for pipe supports, specialty regulating valves items, directional, globe, gate and automated butterfly valves and bulk pipe equipment. Specification design, purchasing approval, equipment/ materials/ data base management supply chain delivery incoming and outgoing products, inventory control, logistics, scheduling of work orders, resourced supply chain inventory, manpower in a 1250 person organization responsible for operations. Utilized high tech inspection devices in Flat Rolled Division Complexes while implementing Plant, Facility and Plumbing Process Pipe Designs for gas, fluids, acid, oil, hydrogen, oxygen and plant air, computer aided design, mechanical, electrical, electronics, computer technologies, information technologies, web designs Maintenance Plans, Scheduled Maintenance Work Orders with Operations Planning with CMMS by job cost accounting.

Procurement activities by using change management and structuring equipment into functional entities gaining full utility of maintenance planning reliability analysis and technical analysis of bid packages.

• 1973 -2003 hired into Inland Steel billion dollar expansion improved processes after commissioning

• Ground up addition of 485 million #3 Continuous Anneal line

• Plant, Facility Structural steel and Plumbing Pipe Designs, Plant Design Management Systems (PDMS)

• Structural steel designs, Welding and fabrications

• Gas pipe upgrade for Hydrogen furnaces and hydrogen production facilities

• Dirty industrial waste (DIW) pipe upgrade and settlement pond, water treatment separations and chlorination.

• Hydrochloric acid upgrade to Teflon coated pipe

• Repaired or replaced 1- 2500 horse power GE motors

• Repaired or replaced GE motor generators

• Installed, upgraded inspected and analyzed Clark Dresser Rand Sullair rotating turbine equipment

• Repaired and rebuilt Ingersoll Rand heavy duty pumps with operating rages of .25-650 GPM, 30-10500 PSI

• Created IT and technical quality improvement plans using Kaizen, Kanban continuous improvement systems

• Oversaw inspections for manufacturers of appliances and automobiles’ customers

• Responsible for the quality improvement performance, perfected Davy Shape Meter performance PLC servo controlled hydraulic actuators/motors for shape control and leveling

• Responsible for integration of General Motors Supply Chain Pull System, reduced inventory 30%

• Recommended purchases for renewed or new equipment, increased unit reliability 25%

• Maintenance Inspector (Planner Division) Reliability Centered Maintenance (RCM) and Root-Cause Analysis, Failure analysis

• Wrote and developed procedures, training manuals, job safety analysis, reports for job descriptions and practices using AT&T software

• Wrote and developed procedures, training manuals, job safety analysis, reports for job descriptions and practices using Computerized Maintenance Management Systems (CMMS) within Inspection Method Management System René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

• SMX laser alignment of precision equipment

• Manufacturing Resource Planning (MRP) at department level

• Electrical license Hammond, Indiana

• Department safety committee member

• Experience with Total Productive Maintenance (TPM)

• Wrote and developed procedures, training manuals and reports for job descriptions and practices for Telxon

(Fujitsu) information integrated with Oracle

• Installed Telxon (Fujitsu) equipment for remote applications

• Accident investigation, incident command training for individuals in key roles

• Crisis management as emergency first responder

• Conducted site reviews, serviced staff and projected developed annual budgets

• Conducted training and seminars in basic mechanical maintenance methodologies-following ISO9000 strategies

• Coordinated corporate plans by standardizing company vendor guidelines for supply chain delivery

• Strengthened employee training using created material, operations manuals

• Designed and adapted process pipe, hydraulic with weld specifications, electrical, lubrication and new layout of facilities, mechanical equipment using geometric dimensioning and tolerance with CAD systems

• Improved work flows by observing employee skills retraining promoted positive work environments

• Trained, developed entry-level personnel to industry standards

• Engineered electrical/ mechanical Steel Fabrication parts with weld specifications, for upgrade and cost reduction

• Coordinated by ordering incoming and outgoing shipping, receiving, inspection using E-based concepts

• Electro-Mechanical Technologies, Plant, Facility Structural steel and Pipe Designs with weld specifications, 25 years CAD experience

• Information Technologies, Supply Chain Design and Management

• Education Instructional Designer

• Human Resources

• Trained multiple skills within a diverse workforce environment while implementing organizational development supervisory strategies

• Provided individually written policies and procedures corporate wide to improve safety, quality and profitability

• Integration of business international operations with manufacturing logistical supply chain

• Integrating progressive computer based business experiences in operational continuous improvement efficiencies using system development life cycle (SDLC) for Oracle/ People-soft/ SAP, Animation

• Programmable Logic Controllers (PLC) Allen Bradley and Yokogama

• National Fire Protection Association (NFPA)

René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

• Servo controlled hydraulic actuators/motors for shape control and leveling

• Service Oriented Architecture (SOA)

• Structured Query Language (SQL) application, Enterprise Asset Management (EAM)

• Asset Performance Management (APM)

• Plant Plumbing, Facility Structural steel and Aquatic Pipe Designs, Weld specifications, Plant Design Management Systems (PDMS)

• Project Management (CMMS)

• Reliability Centered Maintenance (RCM)

• Turbine and rotating equipment Vibration Analysis

• Heating ventilation and air conditioning (HVAC)

• Facility management solutions using computer aided design (CAD)

• Material Resource Planning (MRP)

• E-business, point of sale order fulfillment systems

• Project Manager using Primavera and Microsoft Project

• Industrial piping design, retro fit mechanical designs on weekly, monthly and annual outages

• Finite element analysis (FEA)

• New facilities design

• Information technology operations

• Consulting entrepreneurial/new business start-up background

• Led and directed numerous initiatives that enhanced global supply chains by utilizing state of the art technology and comprehensive user training

• Material management with industrial projects while reducing inventory costs

• Minimized capital equipment downtime

• Implemented best practices and improved administrative support systems

• Proactive strategic project planning, analytical, decision making and team building skills. OSHA, Technical Report Writing Computer-aided Design, AutoCAD Navisworks, Bentley Project Wise Start Point, Microstation V8 XM, Computer Information Systems, Revit, Managerial Finance, Construction Drafting, 3D Studio Max, Inventor, Visual Basic (VB), Oracle Data Base, SAP, Mechanical Desktop, Pro-e, Computer Networking, SMX, Everest ERP software, Microsoft Interdev, Access, HTML/ XML, Visio, Macromedia/ Flash, ERIS, Symantec/ Veritas, Alice 3D, NASD series 63 licensed, Mechanical Engineer Designer, Computer Software Expertise, Toyota lean manufacturing Vice president Indiana Contractors Association, computerized training Consulted for Fujitsu provider of customer focused information technology and communication solutions offered pace setting device technologies, highly reliable computing and communication products, and service experts in Oracle Consulted with BP on data recovering of pipe data corrosion erosion rates René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Consulted with Jock McKernan CEO on Education Management Corporation (EDMC) Company; RT2D.LLC, Education Management Corporation, Fujitsu, BP Overhead Crane Machinist Rigging mechanic, Hydraulics, Pneumatics, Bearing machinist, Lubrication technology Supply Chain Design and Management

AutoCAD Designed and adapted process pipe, hydraulic, electrical, electronic assemblies, enclosures and electronics packaging, lubrication and new layout of facilities, mechanical equipment using geometric dimensioning and tolerance with CAD

Web design, Rapid web development, Information technologies, International Business, Information Technologies Video Image Editing Technologies

Redesigned laminar fluid strip cooling system for easy cleaning In charge of Mechanical Engineering inspection planning maintenance of delivery end 80 inch hot strip mill Hydraulic Plumbing systems and piping systems, PLC servo controlled hydraulic actuators/motors for shape control and leveling Facility water reclamation conditioning chlorination of cooling water piping systems, settlement area for cooling water and tower cooling, auxiliary systems and air conditioning. Repaired and rebuilt Ingersoll Rand heavy duty pumps with operating rages of 25-650 GPM, 30-1500 PSI Repaired and rebuilt Vickers heavy duty pumps with operating rages of 30-200 GPM, 0-1500 PSI Repaired and rebuilt Kobe Triplex heavy duty pumps with operating rages of .25-200 GPM, 0-10500 PSI Built add on internal buildings using steel building technology Designed/ checking of projects, designed and adapted process pipe, hydraulic, electrical, electronic assemblies, enclosures and electronics packaging, lubrication and new layout of facilities, mechanical equipment using geometric dimensioning and tolerance with CAD

Engineered A/C power hot rails and installed local inventory control devices (Telxon) bar code and scanners Engineered Reliance Variable Speed Drives (VSR)

Engineered Package Wrapping technology for large products Assisted in redesigned mill motor and shape control Hydraulic pump systems PLC servo controlled hydraulic actuators/motors for shape control and leveling with Davy McKee for two large production units 58 million and 22 million Installed soft touch hydraulic system and urethane sleeves Redesigned retrofitted and installed air dryer Clark Dresser Rand air compressor with updated electronics Repaired and rebuilt Ingersoll Rand heavy duty pumps with operating rages of 25-650 GPM, 30-1500 PSI Repaired and rebuilt Vickers heavy duty pumps with operating rages of 30-200 GPM, 0-1500 PSI Repaired and rebuilt Kobe Triplex heavy duty pumps with operating rages of .25-200 GPM, 0-10500 PSI Installed and improved process equipment for electrostatic fluid deposit Installed Sony optical inspection device and Kodak optical inspection device Designed auxiliary potable water system

René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

Redesigned hydraulic pump fluid controls for Marotta pressure reducing valves Lift controls for dirty industrial waste piping system (DIW) settlement area Dirty Industrial Waste (DIW) Pig cleaning, chlorination and testing Sanitary settlement skimming separators, reclaiming and chlorination Customer service visits to customers at General Motors Bay City, and Steelcase within the continuous improvement team Morgan Construction Company mist oiled bearing upgrade to sealed bearings Sheet steel continuous drying with steam heat exchangers Trained General Electric personal on sealed bearing installation Heating Ventilation Air Conditioning (HVAC) Air wash vent fan system charcoal air bag filtration, HVAC industrial motor cooling and facilities and residential units, Redesigned computer room A/C with Copeland A/C compressors Computerized alignment of rotating pumping equipment Assisted in creation of new computerized work order system using AT&T software and Lotus Began computerized inventory logistics coding of spare parts Began to redesign various items using AutoCAD taught by Sham Tickoo noted AutoCAD book author Assisted with local engineering and surveying of 485 million continuous anneal line installation and operations Earned journeyman’s multi craft certification

Hydraulic Pump equipment rebuilds Ingersoll Rand heavy duty pumps with operating rages of .25-650 GPM, 30-10500 PSI

Apprentice journeyman Multi-craft mechanic responsibilities included learning in step procedures validated with testing in pipe fitting/ plumbing, weld specifications, crane machinist, rigging, hydraulic systems actuators, auxiliary electrical, pneumatic systems, water tower cooling, motor cooling systems, Halon and wet fire safety systems. Hydrogen/ natural gas production for annealing furnaces Current technologies for hydraulic systems control leveling Air compressor technologies

High speed grinding, Roll texture blasting

Charged with redesign repair maintenance of plant and facility equipment Retrofit of upgrades to Fox hydraulic piping system by converting screw pumps usage to Vickers pumps Morgan Construction Company oil upgrades

hp to 5000 hp Motor changing, Journal Babbitt bearing replacement High pressure 650 GPM at 1500 PSI Working pressure hydraulic pump rebuilds National Electrical Code (NEC) and National Electrical Contractors Association (NECA) National Fire Protection Association (NFPA)

René O. Treviño’s

Résumé

PROFESSIONAL EXPERIENCE

American Society of Mechanical Engineers (ASME) code knowledge, B31.1 - Power Piping, B31.3 - Process Piping, B31.4 – Pipe line Transportation Systems for Liquid Hydrocarbons and Other Liquids, B31.5 - Refrigeration Piping, B31.8 Gas Transportation and Distribution Piping, B31.9 - Building Services Piping, B31.11 - Slurry Transportation Piping Systems, Y14.5 CAD standards

Universal refrigerant certification

Pressure vessel codes for High pressure accumulators Sec VIII Safety valves, Blow off valves, Rupture discs, relief valves, pressure regulator valves, pressure relief orifices, externally operated pressure relief valve, bypass relief valves and have rebuilt or refurbished and reset most if not all of these valves.

Directional control valve rebuilds, for plant and facilities Electric overhead cranes

Belt and steel conveyor upgrades for dry and wet applications on systems capable of delivering millions of pounds of product delivery at great distances.

Electric Motor and environmental vent system upgrades REFERENCES

Provided on request

Contact this candidate