Post Job Free

Resume

Sign in

inspector Sheet Metal Electrical

Location:
United States
Posted:
June 29, 2016

Contact this candidate

Resume:

Victor Bullard

Quality Inspector / Supervising Manager - iBoat of Oklahoma

Konawa, OK 74849

acvho0@r.postjobfree.com - 580-***-****

Inspector, Coordinator, Supervisor, Planning Engineer and Training, Experience, Planner, Aircraft Electrical Experience, Aircraft sheet metal / Composites / Assy / Repairs, Electrical Tech Orders, Mechanical Troubleshooting, Aircraft Modifications, Aircraft Component Inspection, Non-Destructive Testing, Electrical Testing Equipment, Planning Engineer, Receiving Inspector WORK EXPERIENCE

Quality Inspector / Supervising Manager

iBoat of Oklahoma - September 2009 to Present

Perform inspections of sheet metal, electrical components, composite components, and repairs on air boats, ATVs, utility vehicles, marine vehicles, and small engine repairs. I am responsible for First Article Inspection of incoming parts to ensure compliance with vehicle/manufacturer blueprints, specifications and safety. I perform Corrective Action paperwork and worked with vendors to ensure the correct parts/items were ordered/shipped/ received. I inspect all types of hardware including but not limited to rivets and fasteners to ensure compliance with manufacturer blueprints. I am supervisor over multiple mechanics to ensure work is performed correctly, efficiently and to manufacturer specifications. I am responsible for vehicle delivery to the customer and ensuring consistent communication with the customer throughout the maintenance period. I manage the software inventory and software database to ensure the company has the parts and materials needed to perform daily tasks. I perform tests on completed jobs to ensure compliance with vehicle/manufacturer blueprints, safety and customer satisfaction. I inspect and supervise the use of all tools and company equipment. Quality Inspector

BIZJET - Tulsa, OK - February 2014 to September 2014 Responsibilities

PERFORMED QUALITY ENGINEERING WORK TASKS,INSPECTED THE BOEING 777 DREAMLINER IN ALL ARES SUC AS FABRICATION,INTERIOR AND CABINET COMPONENTS,I PERFORM QUALITY AUDITSAND PRIORITIZED JOB ASSIGNMENTS TO ENSURE COMPLETION ON SCHEDULE AND WORKED DIRRECTLY WITH CUSTOMER AND SPECIAL PROJECTS Accomplishments

COMPLETED ON TIME,ALL PROJECTS IN TIMELY MANNER

Skills Used

SKILLS BY USEING COMPUTER, AND PRECISION MEASUREING INSTRUMENTS Inspector of Primary & Final Assembly

Bell Helicopter - October 2003 to September 2009

Tested all Electric installs of components and pyro techniques, tested all types of materials and captured serialization of parts. Inspected parts to verify they conformed to blueprint specs, handled explosive fire extinguisher for aircraft process, managed Return to Vendor documents, worked with IMS documents and assisted planners. I performed Quality Engineering work tasks. I worked with the latest software technologies on Inspections of the V-22 helicopter in areas such as: torque box, hub and blades subassembly and final assy. I performed Quality Audits and prioritized job assignments to ensure completion on schedule and I worked directly with customer. I ran electric wires and installed parts and components per blueprints and tech orders as required.

Structural Mechanic / Inspector

Raytheon - Cherry Point, NC - April 2003 to October 2003 I worked with sheet metal parts and components airframe. I ran electrical wires and installed component hook ups. I also worked hydraulics plumbing; removed and replaced as needed. I maintained parts log for incoming parts and outgoing structural mods, all types of fasteners: Hylock cherry lock, solid fasteners monel, and all typical fasteners. I worked with UH1-N and Cobra Helicopters. Structural Mechanic

Boeing - San Antonio, TX - October 2002 to April 2003 Technician on: KC-135 modification, numerous types of repairs R&R hydraulic lines. I assisted and worked with planning engineers.

Structural Mechanic

L-3 Comm System - Waco, TX - June 2002 to September 2002 I worked sheet metal repairs and production manufacturing. I helped control parts and materials for Lean Manufacturing.

Sheet metal Mechanic Marine

Bullard Manufacturing - Marietta, OK - September 2001 to June 2002 I worked as mechanic for and performed structural repairs and parts fabrication for general marine equipment and modifications. I worked with I.A.W. Blueprints and was Inspector for parts and modifications. I performed electrical repairs, ran wires, and performed necessary electrical troubleshooting. Structured Mechanic

Air Force Civil Service - Tinker AFB, OK - June 2001 to September 2001 I performed structural modifications and repairs on KC-135 aircraft. I had RED X ORDERS. I inspected Kc-135, C-5,141, C-17 aircrafts. I worked from T.O. and engineers orders and inspected aircrafts for compliance. Mechanic / Electrical Coordinator

McKinney Aerospace - McKinney, TX - July 2000 to June 2001 I performed electrical installations of components for production to be worked by mechanics for structural helicopter modifications and repairs on Blackhawk Helicopter and Astra aircrafts. I was Inspector for 20 plus contractors, worked with Engineer Dept. and Interiors/Sheet metal/Composites/Bonding work with lean Manufacturing. I also helped control inventory and parts management. Project Coordinator / Supervisor

Galaxy - Fort Worth, TX - March 2000 to July 2000

I supervised the personnel for structural repairs, modifications of radio racks and ECS, installation of radio racks, rain gutter, cockpit/data recorders, and inertial switches. I worked on Galaxy and Astra aircraft. I was Project Coordinator/Supervisor over 30 employees

Structural Mechanic

Strom Aviation Inc - Dallas, TX - December 1999 to March 2000 I performed C checks and structural modifications on Boeing 727, DC-8, and DC-9 aircraft. Sheet Metal Mechanic

Marietta Aircraft, Air Boats, & Sheetmetal - Marietta, OK - May 1999 to December 1999 I performed all sheet metal repairs and modifications. I installed wiring assemblies and performed electrical troubleshooting and repairs.

Structural Mechanic / Electrical Install Tech

AAR Will Rodgers Airport - Oklahoma City, OK - March 1999 to May 1999 I worked as an aircraft sheet metal assembler/installer on 707 for the Air Force and Navy. I made all types of aircraft sheet metal modifications. I have an FAA REPAIRMAN CERTIFIED CERT and worked with composite Bonding.

Structural Mechanic

Raytheon Systems - Greenville, TX - November 1997 to March 1999 I worked as aircraft structural assembler/installer for government contract project. I installed electrical components and performed P-3 modifications on numerous aircraft. Sheet Metal Mechanic

STS Services - Palm City, FL - August 1997 to November 1997 I performed aircraft sheet metal repairs on Boeing 727 and Boeing 707 working from blueprints and engineer's changes performing both structural and composite repairs. Flight Inspector RED X ORDERS Flight Inspector

Altus Air Force Base - Altus, OK - September 1996 to August 1997 Electrical

I performed aircraft inspections of sheet metal and electrical components and repairs on KC-135, C-17, C-5, C-141 aircrafts. I accepted promotion with Red X orders to inspect all other structures, aircraft sheet metal repairs, electrical work of other mechanics. I was supervisor for aircraft on the flight line. I was Supervisor over the aircraft parts of the removal, replacement, storage, logging and tagging with all proper data. I was responsible for placing items in correct areas of storage. I was also responsible for customer delivery on time for flights. I managed planning for material needed and helped control inventory with Lean Manufacturing principles. I prioritized job assignments to ensure completion on schedule and worked directly with customers to ensure on-time delivery of material, parts and components. Coordinator / Supervisor / Planning / Inspector

Global Tech - Fort Worth, TX - January 1994 to September 1996 I coordinated and supervised the planning of the production jobs to be worked for various tasks for the production necessary to repair sheet metal on aircraft wing, damage skin, frame, and rib repair. I SUPERVISED 20-30 sheet metal technicians and worked as Planner and Inspector Coordinator. Structural Mechanic / Composite Bonding and Manufacturing Global Tech - Arlington, TX - July 1994 to December 1994 I helped control and operate with Lean Manufacturing. I worked on C-130 aircraft at Will Rodgers Airport for Air National Guard; performed sheet metal modifications, ran wires and performed electrical testing for installs for. Some of the work performed includes: chaf and flare, bleed air ducts, true air speed, installed numerous brackets, removed and reinstalled sheet metal leading edges. I worked with manufacturing and helped control material planning with lean manufacturing.

Coordinator / Supervisor / Inspector

Electro SPX - Fort Worth, TX - January 1990 to July 1994 I was Personnel Coordinator/Supervisor of twenty-five Aircraft mechanics who worked on the Humvee vehicle and Black Hawk Helicopters ELC- 0. I performed C and D checks and fabricated parts that were needed for certain job tasks. I inspected numerous repairs using tech orders and structural repair manuals. I inspected the repairing of the Longerons, skins, and main frames. I removed and rebuilt worn, damaged, and missing sections on aircraft. I inspected and supervised the use of all types of sheet metal tools. I worked with electrical mods, ran wires, and troubleshot problem areas.

Supervisor / Inspector

AAR Inc - Oklahoma City, OK - August 1986 to December 1988 I inspected, supervised, and developed projects. I performed responsibilities as Engineer/Planner with direct supervision of 15-24 personnel at all times. I inspected numerous repairs on these aircrafts Manufacturing and helped control lean Manufacturing and on time delivery of the Boeing 727. I also performed electrical wiring, troubleshooting, and repairs as required to accomplish contract guidelines on the following: empennage, wings cowling, and aircraft door. I performed layout work for sheet metal repairs, skins, and heavy structure work, and performed geometric projection and triangulation. I have had to assemble, disassemble, and reassemble, etc. Structural Mechanic

Tinker Air Force Base - Oklahoma City, OK - July 1981 to August 1986 I performed aircraft structural repairs on B-52. I was structural tech, WG-10, Step3, worked structures on flight controls, engine cowlings, batch doors, nose cones, and right hand wing using numerous types of fasteners and all types of tools of the trade such as rivet guns, brake, shear, drill press, high speed grinders, off-set rivet sets, all hand tools, wrenches, and scales. I also worked with Composite Bonding on Aircraft parts, etc. I performed Shake Inspections, worked with MRB for corrective repairs as required. I worked the electric mods and ran new replacement wires for numerous work tasks and troubleshooting as required. EDUCATION

High School Diploma

La Salle Extension University - Chicago, IL

1968 to Present

education

St Phillips College - San Antonio, TX

1996

TRADE SCHOOL

1968



Contact this candidate