Supervisor / Inspector /Qa Qc
Resume:
Curriculum Vitae
PERSONAL DATA
Name : Adil Archam
Date of Birth : Jakarta 10 April 1967
Nationality : Indonesia
Marital Status : Married
Permanent Address : Jalan Kutilang 4 No 10 Kurnia
Jaya Alam, Batam Kota,
Batam-Indonesia
Mobil Phone : +628**********
Email Address : ***********@*****.***
Passport : U 591835
BOSIET / FOET : 954050
Experience Classification Industry Oil & Gas 17 Year
Education Qualification:
Electrical Eng’g Institute Technology National Bandung
Training and Course
H2s Level 2, Confined Space Entry, Working at Height and Permit to Work System by Tripatra 2015
Work Management System By Exxon Mobile Indonesia 2015
Confine Space, Conoco Phillips and Premier Oil
Permit to Work System, Conoco Phillips 2012 and 2015
Onshore HSE Induction, Conoco Phillips 2012 and 2015
EEHA Agip KCO
Hazardous Area Electrical & Instrument (OPITO)
CERTIFICATE from The City and Guilds Of London Institute No190811/066605/076221/VKI4590/M10/04/67
Seaman Book Common wealth of Bahamas CERTIFICATE SRB00013
BOSIET OPITO CERTIFICATE from MSTS ASIA SDN BHD Johor Malaysia P517551- http://60.54.132.162/msts/SearchCert.asp
Professional training for Instrument Inspector, Pre-commissioning and Commissioning For Oil and Gas System (CERTIFICATE Marine and Offshore Training Centre/Ikbal M. Yos – May - August 2007) 012/INST.- II/X/2007 http://www.ikbalmyos.com/index.php?act=alumniii
Confined Space Entry and Permit to Work CERTIFICATE from Industrialindo Konsultrain Services 13 June 2007 No PTW . 10327/IKS/07
Operator Pesawat Angkat & Angkut CERTIFICATE from Menteri Tenaga Kerja Dan Transmigrasi RI 17 October 2006
Safety Induction by PT.Babcock & Wilcox Indonesia
Safety Induction by Bredero Shaw Indonesia
Safety Induction by J-Ray McDermott
Quality awareness Level 1,2and3 by J-Ray McDermott
AMS Hart Communicator 375 by FOSTER WEELER WORLEY JV- WOODSIDE
Safety Induction by SAIPEM S.p.A
Safety Induction by Premier Oil Indonesia
Safety Induction by ConocoPhilips Indonesia No PTS 15519396
Safety Induction by Agip KCO
Refresher Hazardous Area ATEX & EEHA From Agip KCO
Training Confined Space From Agip KCO
Training Working at Heights or Elevated Work From Agip KCO
Further Offshore Emergency Training Course (FOET) An OPITO approved CERTIFICATE from M&O Indonesia No 954050
Summary of Experience A positive and proactive professional who has acquired invaluable experience working in explosive atmospheres. Having more than 20 years in active and progressive experience in Electrical & Instrument Engineering practices ranging from engineering, fabrication, installation, inspection, and commissioning of the project onshore and offshore with emphasis on oil and gas platform, living quarter, and mining operation. As a “EEHA OPITO” Electrical Hazardous Equipment Area, competent in performing preparation, installation, maintenance & Inspection of explosion protected apparatus in hazardous area and have a clear understanding of the various types of explosion protection, installation practices, rules and regulations, and the general principles of area classification. Vast experience and knowledge in installation supervision of HV/LV Switchboard, HV/LV transformer, electrical/Instrument panels, lighting system, UPS and Battery, navigational aid, heat tracing, electrical and instrument supports, cable ladder/tray, pulling, glanding, termination of power, control, instrument and telecomm. cables, installation of various field instruments, fire and gas system and other electrical/instrument and telecom equipment.
Having good knowledge in international standard and codes such us AS/NZS, API, ISA, NEMA, NETA, NEC, IEC, IEEE, NFPA etc. Familiar with electrical & Instrument drawings, general arrangements, single line diagrams, block diagrams, interconnection diagrams, loop drawings, P & ID.and all type of engineering and fabrication drawings. Well familiar with the application of PIMS (Project Information Management System). ICAPS (Integrated Commissioning And Progress System), Computer literate using MS Office application, etc.
Detailed Work Experiences
June 2015 - May 2016 Premium Consulting
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
Banyu Urip EPC 1 Exxon Mobile Indonesia Onshore Block Cepu
Job Description
Project EPC 1 QA/QC Inspector for Construction
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on IEC 60079 standards.
Working for ExxonMobil on Banyu Urip EPC1 Refinery Plant Project.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to Lead QA/QC Inspector and QA/QC Manager.
Contact Person : Conor Farrell QA/QC Manager
Email :
Work E-Mail: *****.*******@*******.**
Private E-Mail: *********@*******.***
November 2012 - April 2015 JAVA VELOSI
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
ConocoPhilips Indonesia All Onshore facility Palembang (SUBAN Gas Plant, GRISSIK Refinery Plant, DAYUNG Gas Plant, SUMPAL Gas Plant, RAWA PSC OIL& Gas Pant, Barging Stored Tank)
Periodic Inspections for Hazardous are classification and Small Project Conoco Phillips
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on API, NFPA.
Inspection hand over small project to Operation :
-LTRO (Letang Tengah Rawa Optimization )
-DC1/CGPX Project Grissik
-Suban Condensate Tank Project
-Suban Condensate Mercury Removal Project
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to QA/QC Manager and Technical Authority
Contact Person : Michael Loock QA/QC Manager (Applus Velosi)
Email : *******.*****@************.***
Drajat Yuhendar Technical Authority (Conocophilips Jakarta)
Email :******.********@**************.***
Agustus 2012 BUREAU VERITAS under KPOP until November 2012
E&I Inspector ATEX & EEHA Project at Kaz Project Operating LLP
for BOLASHAK ONSHORE FACILITY AKCO-Agip,Eni,Shell Oil & Gas Joint Operation Central Processing at West Eskene, Karabatan, Atyrau - Kazakhstan
Job Description
Project Agip KCO Karabatan Atyrau QA/QC Inspector Hazardous
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on IEC 60079 standards.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to Lead QA/QC Inspector
Juni 2012 JAVA VELOSI until Agustus
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
ConocoPhilips Indonesia Onshore facility Palembang (Grissik, Dayung, Rawa and Suban )
Periodic Inspections for Hazardous are classification
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on API, NFPA.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to QA/QC Manager and Technical Authority
Contact Person : Michael Loock QA/QC Manager (Applus Velosi)
Email : *******.*****@************.***
Drajat Yuhendar Technical Authority (Conocophilips Jakarta)
Email :******.********@**************.***
April 2012 PT.SATOIL (Third Party)
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
ConocoPhilips Indonesia Onshore facility Palembang (Suban, Rawa, Barging and Supat)
Periodic Inspections for Hazardous are classification
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on API, NFPA.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to QA/QC Manager and Technical Authority
Contact Person :
Drajat Yuhendar Technical Authority (Conocophilips Jakarta)
Email :******.********@**************.***
January 2012 – April 2012 PT. VME Process (VME Process Group Pte Ltd)
E&I Inspector
SIEMENS PAPA TERRA, E HOUSE PROJECT/CLIENT FLOATECH.
Job Description
Review drawing layout and wiring termination (with visual and continuity test) during Pre-Comm & installation phases include fit up after MC ITR (Mechanical Compliance / Inspection Test Report
Check and completed job as per specification project of construction process like as gland install, cable/wire marker, routing and dressing cable in line cable tray from source to site/device, also wiring termination
Contact Person :George Ralston (Commissioning Manager Siemens Brazil)
Terje Istad (Lead Commissioning Siemens Brazil)
December 2011 PT.SATOIL (Third Party)
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
ConocoPhilips Indonesia Offshore South Block B Natuna Sea (Offshore Natuna Sea ( FPSO Belanak Wellhead A & B, CPP Kerisi)
Periodic Inspections for Hazardous are classification
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on API, NFPA.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to QA/QC Manager and Technical Authority
Contact Person :
Drajat Yuhendar Technical Authority (Conocophilips Jakarta)
Email :******.********@**************.***
July 2010 – July 2011 PT.SATOIL (Third Party)
E&I Inspector and Electrical Equipment Hazardous Area (EEHA)
Premier Oil Indonesia Offshore South Block A Natuna Sea ( Anoa Platform, Anoa Gas Export, West Lobe (Remote) and Anoa FPSO)
Job Description
Verifying installation of Electrical, instrument equipment in potentially explosive atmosphere based on API, NFPA.
Inspection of Various Electrical, Instrument and Equipment base on Hazardous area classification (Ex).
Report to QA/QC Manager and Technical Authority
Contact Person :
Sarwono P Satrio Manager SATOIL
Stephen Convey (HOFO Premier Oil Anoa)
March 2010 – July J.Ray McDermott
Mechanical Completion (MC) Telecom
Chevron Platong Gas II Thailand For Living Quarters
Job Description
Supervision on installation & mechanical completion, pre-com, commissioning and takeover of: PABX, VHF Marine, MF/HF Transceiver, UHF Repeater, Paging system.
Perform check and signed punch list when inspection found not in specification project required
Check and completed job as per specification project of construction process like as gland install, cable tagging/cable marker, routing / tie down and dressing cable in line cable tray from source to site, wire marker also wiring termination (suitable in spec and hazardous location).
Contact Person :
John Mcculloch (McDermott)
Bambang Suryadi (McDermott)
February 2009 – February 2010 Global Petroprojects Services AG. ENI
Electrical Tehcnician Barge Castoro 10
Saipem S. p. A
Bohai Project Offshore China
Job Description
During pipe laying operations. Maintenances, servicing and rectifying failures of electrical, automation and communication equipment on pipe laying barge during pipe laying operation
Up gread barge Pipe laying Castoro 10 Tuas Singapore
Job Description
Supervise the work of contractors Tuas Yard Singapore
Replace the tensioners to the larger size following the control room, replacing all electrical installations and power control cables, Supervise the installation of internal part of equipment vessel
Responsible for electrical & instrument installation, termination, loop check &calibration. Monitoring the quality of jobs. Solving the site manpower issue. Preparation of job progress report & safety issue on site
May 2006 – February 2009 J.Ray McDermott
Mechanical Completion (MC) E&I
CPP-Central Processing Platform, Su Tu Vang 15,000 Metric Tons Project, Vietnam, CUULONG JOIN OPERATION COMPANY and McDermott Batam
Job Description
Preservation Electrical & Instrument
Material receiving inspection
Installation temporary and energizer for space heater 110 Volt
Daily report all space heater, all motor for resistance, temperature and voltages
Daily report humidity all junction box, all marshaling cabinet
Provide a power source for purposes Pre-com
Notification, witness and joint inspection with E&I Client Inspector
Assistance to commissioning activities
Conoco Phillips Indonesia INC.LTD KERISI
For MSF (Module Support Frame)
Mechanical Completion (MC) E&I
Job Description
Material receiving inspection
Prepare document of above electrical Lighting (cable report, cable installation progress, cable equipment installation and Electrical completion report).
Prepare test package of above electrical Lighting inspection and pre-commissioning.
Follow up of various electrical Lighting and instrument punch list.
Prepared and check for all Electrical Lighting update drawing and standard drawing before Precommissioning Activities
LNG Phase–V Expansion 32 pre-assemble moduls, Engineering by FOSTER WEELER WORLEY JV- WOODSIDE Project, Australia and McDermott Batam as the Main Contractor
Mechanical Completion (MC) E&I
Job Description
Inspection of materials / vendor package receiving
Check Instrument installation drawing and P&ID
Calibration Transmitter Transmitter Calibration with Hart Communicator 375
Monitoring Instalation of support / brackets for Transmitter
Inspection pulling cable and cable indentification based on cable schedule and specitications
Monitoring Preservation activities
Performs punch-listing operations
Prepared test package pre-commissioning of pneumatic test
Contact Person :
Pablo Varona (McDermott)
Waluya Priyatna (McDermott)
Peter Harkins (Cuulong Joint Operating Company)
Ikwan Marianto (Cuulong Joint Operating Company)
May 2005 – November 2005 Pt.Graha Cipta Utama
QA/QC Electrical Inspector
Bredero Shaw Indonesia
Inspection of new buildings, for offshore pipe coating facility
Job Description
Inspection of materials / vendor package receiving
Inspection of Various electrical and installation
Inspection of various cable termination and testing, Grounding/Earthing.
Prepared pre-commissioning activity such as: insulation resistance test, continuity test, impedance test, and mark up drawing
Follow up of various electrical punch list
Contact Person :Anthony (Bredero Shaw Australia)
March 1998 – February 2004 PT.Babcock & Wilcox Indonesia
QA/QC Electrical & Instrument
Fabrication facility
Job Description
Repair welding machines, lighting, cranes, projet preparation for power source
Contact Person :
Richard Wotson
Pilo Santiago
Augustus 1997 – February 1998 YAYASAN MOESTOPO
Supervision Mechanical & Electrical
Proyek New Building Kampus III Universitas Prof.Dr.Moestopo
Mei 1997 – September 1997 PT.Tunas Dwiputra Pratama
Site Manager
Projec Expansion Hotel Sheraton Inn Bandung
Responsibilities :
Reporting to Project Manager
Interface white senior management project engineering staff supplier, subcontractor clients and consultants
Following the documents technical submittals and drawing for approval
Prepairing all daily, weekly and monthly progress reports
Mei 1997 – September 1997 PT.Mega Eltra
Electrical Coordinator
Proyek Kantor Pos & Giro Pusat Bandung
July 1994 – July 1995 CV.Tiga Erada
Technical Staff
Proyek Electrical Installation
--oo--
Contact this candidate