Dwayne Lucas

**** ** ** **

Vancouver Wa

503-***-**** Cell

Message 360-***-****

Email - acuwg8@r.postjobfree.com

Objective:

I am seeking employment in a challenging field, with the opportunity to utilize my maintenance, machining sales and supervisor skills to advance within a goal oriented company. Started my machining career at Lindsay Enterprises carbide cutting tools in 1979 right out of high school and was with the company for around 10 to 11 years making special carbide tipped metal cutters.

Work Experience:

Ozone International George Briggs 206-***-****

December 2015 February 2016

Field Technician For eastern Washington

Install and the repair on ozone machines for the food, water, seafood,chicken industry for sanitation purposes. Remove and install compresses,oxygen concentrator.

Also was involved in the wiring of these machines,to analyzers and distributors for cold storage. Do all the trouble shooting and repair internet connections,parts ordering service order writing also customer contact .

PIC

March 2014 to present

Millwright Jennifer Stephens 360-***-****

Install and removal of all sizes of machinery. Heavy rigging, bolt down to floor,,electrical work. Welding, large forklift operator,use of cutting torch. Any thing needed to get the job done

Read and understand blue prints, assemble and disassemble as needed to perform my job

Trains and resolves problems for less experienced technicians. Leads and directs the work of other technicians. Install and replace new motors and gearboxes

Boeing Machinist Supervisor Jeremiah Simpson 971-4578

June 2011-jan 2014

Duties: Read and understand blue prints, assemble and disassemble as needed to perform my job

Set up and operate surface grinder, Id grinder, Od grinder, thread grinder also CNC grinders. Holding Tolerances to -.0002. Holding finish to 8 rms. Use lathe and mills for different types of jobs such as fixture fabrication, and any thing that the ei team needs me to machine or fabricate to there specs. Also set up and operate milling machines,and lathes,drill press some gear machining. Performs a variety of inspections as required by equipment. Documents maintenance and inspection actions as required. Trains and resolves problems for less experienced technicians. Leads and directs the work of other technicians. Works with minimal direction. I have good communication skills.also certified in lean manufacturing and a safety focal.

Maintenance Millwright Farmers Creamery Supervisor Brad Bennit 503-***-****

March 2010-june 2011

Duties:

Electrical trouble shooting and repair, plc trouble shooting and repair, tig welding stainless steel tubing, carteener repair along with caser repair. Motor and gear box repair, valve repair, acurater repair conveyer repair. Replace bearings, pump seals. Order parts for all maintenance repairs. Troubleshoot and repair all breakdowns in the plant. Turbo fan re-machine and rebuild. forklift repair. Maintaining complex equipment and systems by removing, replacing, repairing or upgrading components. Constant interface and support for Supplier Painting activity. Conducts complex functional tests by operating equipment and using appropriate test equipment. Performs a variety of inspections as required by equipment

Millwright Dalauren Enterprises Supervisor Dave Egbert 360-***-****

February 2009-Feburary 2010

Duties:

Setup and operate lathes, milling machine, id od grinder, drill press holding tolerance to +/- .0002. Install and remove of all types of machinery .Repair of machinery, gear boxes, Motors conveyers belts, welding, thermal couple repair,plc trouble shooting, electrical repair.Tool fabrication,such as fixture for cnc mills as we call them tombstones. Welding touching and scarfing, use of all hand tools. Repair and do preventive maintenance on customers cranes, Forklift and crane certified.

24 hour mechanical service. Replace noodles and filters in storm water treatment plants. Engineer and fabrication of a trolley system for waste water treatment plant Supervisor of 2-6 employees. Use of ladder logic for electrical repair,Also do bidding on jobs, vacuum pump repair,replace seals, estimating,project manager. Troubleshoots problems to isolate faulty components

Millwright/Machinist Esco Corporation Supervisor Tim Adams 503-***-****

March 2008-January 2009

Duties:

Set and operate 6"horizontal boring mill and lathes planer large boring mill.

for a 30 acre foundry. Do complete repairs for all machinery.

Heatreat ovens, Steel melting Furnaces, Wheelabrater, sandblaster, Sand Conveyer system, motors, pumps, Check water levels for furnaces, ovens and quench tanks . Use of welder cutting torch all hand tools also power tools drill press mills lathe. Crane repair, Repair of building, Do any repairs to keep production up and running.. set up and operate surface grinder,od grinder gear cutting machine and brouch machine. Set and operate 6 inch boring mill. I would take a casting and off a blue print Mill, Drill, bore holes from,005 to 35.000 holding tolerance to +/- .001 and some cases i would hold +/- .0005. Also run a large planner millq and a large boring mill

Maintenance Tech Express Personnel Supervisor Jennifer 360-***-****

September 2007-January 2008

Duties:

Maintenance tech for bodycote a hot isostatic processing heat treating company.

Maintaining four hip furnaces and five heat treating furnaces. Doing all preventive maintenance and all repairs needed. Trouble shooting and repair for thermal couples, vacuum-pumps, motor repair, any and all repair needed to keep production running. Crane repair to 5ton and 30ton crane, building maintenance.

Owner Operator Chef Express

February 07-Present

Duties:

Sales and delivery of spices and soup bases through out the Portland metropolitan area and the Oregon coast.

Maintenance Supervisor Norwesco

July 2003-December 2006

Duties:

I performed all repairs for the complete production shop, offices, machinery, forklifts also the air compressor.Vacum pump repair Mechanical and electrical repair, any fabrication of steel and wood, welding brazing also repair of all hand tools and air tools. Plc programming and all trouble shooting to find out were the problem exists. I did all the preventive maintenance also order of all parts and materials to complete the job to keep the production moving. Repair of the one and two ton cranes. Call all outside venders to get information to repair machinery or to hire to fix the problem if I could not or did not have the time to do so. Repair of all steel and stainless steel molds. Repair on the oven reaching up to 750 degrees.

Millwright Oregon Steel Mills

March 2003-June 2003 (laid off)

Duties:

Complete repairs on the furnace and All the casting machinery.200 ton overhead crane, repair and or replace of valves, hydraulics, motors,bearings, maintain and repair all pumps and filters on the coolant systems .check and maintain all water levels to keep plant from flooding, be prepared to lower secondary coolant pump to prevent flooding. Also complete machining of all parts to do repair to machinery.

Machinist Boeing of Portland

March 2001-December 2001 (laid off)

Duties:

Set up and operate cnc grinder, Id, Od grinder,surface grinder thread grinder. centerless grinder also fill in for the gear cutters when needed. Do some maintenance on machines also do preventive maintenance on grinders. Precision grinding and holding tolerance to +/- .0002.

Project Manager & Estimator L&L fabrication and machine

April 1999-March 2001

Duties:

Over see fabrication and machine shops from start to finish. Also quote jobs, and outside sales. Route different jobs through out the fabrication and machine shop, to meet customer due dates. Fabrication of structural steel, stainless steel, aluminum, and plastic. I did all my own take off, quoting and purchasing of the complete job such as nuts and bolts, bearings, paint and what ever else the job needed to finish the job to meet my customers due date.

Assistant Lead Man Boeing of Portland

June 1998-July 1999

Duties:

Set up and operate cnc grinder, ID, OD, surface, rotary, thread grinders, roll grinders. Supervise 10-15 employees to make shipping dates, also take care of any problems that may occur on the machine shop floor. Perform all preventive maintenance on grinders as needed. also do gear cutting machine when needed.

Education:

Lewellyn Technology – PLC Repair Certification & Commercial Electrical Certification (2004)

MT Hood Community College – Blue Print Reading & Microsoft Windows (2004)

Rockhurst College – Project Management (2002)

University of Phoenix – business management (2000)

TWIC Certification (expires 2014)

Contact this candidate