Resume

CONTACT DETAILS

Name : Vikash Kumar Email ID :- acufoa@r.postjobfree.com

Address : D-52,Gali No.-07 Contact No :- +91-888*******

Ganesh Nagar, Near Akshardham Metro

New Delhi -110092

CAREER OBJECTIVE

To work in a collaborative environment where I can nurture and sharpen my skills and talent for the growth of company.

PROFESSIONAL SUMMARY

Working as a Graduate Engineer Trainee in Telecom Testing Department with PRECISION ELECTRONICS LIMITED, NOIDA since 17thAugust, 2015 till date.

Project 1 : Working on Telecom Equipments Project for BSNL/MTNL .

Ethernet to nxE1 Converter (1E1. 4E1… to 16E1 ); Make – Precision Electronics Ltd.

-It is a Protocol Converter using Inverse Multiplexing Technique and can transmit Fast Ethernet (optical/electrical) data over N*E1 lines in point to point condition.

-It converts upto 2 Electrical & 1 Optical ports to 1~16 E1 interfaces, that enables Ethernet transmission over PDH/SDH infrastructure.

Responsibilities:-

Programming of EEPROM/Flash (PLCC32 IC)- of Atmel and Winbond Make by USB200 Universal Programmer.

Upgrading/Programming Electrical/Optical/Dual firmware of converter to 1E1, 2E1, 4E1, 8E1 & 16E1 as per requirement by uploading software.

Functionality Testing of Converter ( Electrical/Optical/Dual) followed by Software (PELNMS Manager -SNMP) and Hardware Testing.

Electrical Testing consists of following: - Return loss by using Acterna HCT-300C, BitErr Test, Pulse Shape & I/P Jitter by Acterna/E1 Data Tester, O/P jitter test by Analyzer.

Hardware Testing/ Fault Finding in PCB & PSU Card of converter by using Multimeter and CRO(Osciiloscope) followed by Repairing the same.

30-Channel Digital Multiplexing Equipment PDM-30A ( PCM -2MbPS Transmission Mux. Equipment) ; Make – Precision Electronics Ltd.

-It used to multiplex 30 telephone channels and converts into 2048 kbps digital data.

Functionality & Electrical Testing of PDM-30 for Voice/Level and signaling through Control card and of Data card followed by fault finding and repairing the same .

Project 2 : Worked for Indian Navy’s - AISDN ( ATM based Integrated Shipboard Data Network) based Project which is designed by C-DOT -Govt of India and manufactured by Bharat Electronics Limited (BEL) as Graduate Technical Engineer from 05th August 2013 to 05th August 2015

ATM- (Asynchronous Transfer Mode) Switch Equipments. ; Make – C-DOT

-It is a standardized Digital Transmission Technology designed to support Voice, Data and Video Signals Communication used over SONET/SDH.

Responsibilities:-

The job responsibility includes operation, maintenance and installation of ATM (Asynchronous Transfer Mode) Switches & NIUs(Network Interface Unit) onboard NAVAL warship and integration of ATM switches with other end equipments like CCS, VCS etc.) through STM1 and E1 interface with Linux Platform .

Loading and updating of software for ATM switches, NIU and NHMS PC and monitoring them on Minicom (Hyper- Terminal) /Minicom (Linux Platfrom) and if problem occurs then reporting to concerned people(C-DOT) through Log, prints etc. followed by Software Testing onboard ship.

Network Functionality Testing and Observing the Network status on NMS through RunManager application and taking necessary action on daily basis.

Validation of Data through utility on Linux (RHEL) or Operation and Maintenance done via CLI (Linux) by various linux tools like – ping, telnet/ssh, tftp, tcdump, tar/untar,top, free, ntpd, and many more….. etc .

PCB card Functionality Testing by monitoring the prints on of Hyper-terminal

(Windows Platform) / Minicom (Linux Platfrom) during updating it with the Software followed by hardware testing like IC, RAM, EEPROM etc problems, including PODT(Power On Diagonistic Test).

Data validation and testing using test equipment like Protocol Analyzer(tcpdump), ATM/SDH analyzer, Multimeter . Optical cable checks through optical power meter.

Loading and Installation of RHEL on NHMS-PC followed by LibSmi Installation, MySQL Installation and Replication of PC’s Node.

WORK EXPERIENCE

Worked as a QA/Testing Engineer in AB MSAI Pvt Ltd, New Delhi from June, 2013 to August 2013.

Worked as a Telecom Trainee Engineer in O&M (Network) at Reliance Communications Ltd, Patna from July,2011 to January,2012.

TECHNICAL PROFICIENCY

Programming & Languages

C/C++

Operating System

Linux, Windows, Android

Switching Equipment

ATM (Asynchronous Transfer Mode) Switch Equipment (CDOT-Govt. of India)

Testing Devices

ATM/SDH Analyzer, Optical Power Meter, Oscilloscope, Digital Multimeter, Digital Communication Analyzer (Aceterna, ALT, HCT-300C), Optical Media Converter (850/1550 nm)

Networking Skill

Computer Network/CCNA, Ethernet to NxE Converter.

NIU (Network Interface Unit), PDM-30 Mux.

GUI

Network Monitoring/Management System (NMS) –NHMS, PEL Network Management System for Ethernet Converter.

EDUCATIONAL QUALIFICATION

Examination

School/College

Board/University

Year of Passing

Percentage B-Tech

in

E.C.E

IITT College Of

Engineering, Pojewal

(Punjab)

Punjab Technical

University

2012

78.19

Intermediate

(10+2)

Guru Gobind Singh Public School,

B.S.City (Jharkhand)

CBSE

2007

78.40

High School

(10)

N.S.D.A.V Public School, Sitamarhi (Bihar)

CBSE

2005

84.40

TRAINING/PROJECT UNDERTAKEN

# Have undergone SIX Months Industrial Training at Reliance Communication Ltd, PATNA(Bihar) in “Network O&M” from July, 2011 to January, 2012.

Responsibilities:

TT Closing on SAP Software – (Utility)

Works on Fault-Edit Module of GSM/CDMA (Clarity-Generic Configuration).

Alarm Monitoring on ‘Net-Track Software’.

Well familiar with Transmission, OFC, FA Team, RF Planning & Switching Center (MSC).

Works on N/W Editor (BSC) & Net-term Software (MSC).

# Academic Project:

Project : ‘ Pulse Rate and Body Temperature Monitoring By Using GSM Modem.’

Role : Team Leader

Organization : IITT College of Engineering..

Responsibilities:

In this project we will monitor Patient Body Temperature & Heart Beat & send SMS to the

Saved Number of the concerned Doctor if the Temp & Heart Beat reaches above the limited

value using GSM Modem.

Sense Body Temp using LM35 sensor & Pulse Rate/Heart Beat using LDR

circuit. Output of the LM35 Sensor is further converted into Digital Signal with the help

ADC0809 .

Microcontroller will sense Pulse Rate by using Signal Conditioning Circuit (High Gain

Amplifier) & Comparator Circuit.

In this project we uses IC89s51(8051) Microcontroller which provides all the signals & get the

O/P at LCD display.

AREA OF INTEREST

IT-Software/Telecommunication, QA/Testing

STRENGTH

Hard Work & Quick Learner

Very Adaptive

Positive Thinking

ACHIEVEMENT

Participated in School Level Debate and Essay Competition and Received Applauds.

Appointed as Class Representative for whole 3rd Year during B-Tech degree in my College.

Awarded as Best Bowler in School Level Cricket Tournament.

PERSONAL DETAILS

Name : Vikash Kumar

Father’s Name : Yamuna Prasad

Sex : Male

Date of Birth : 14-02-1990

Marital Status : Unmarried

Nationality : Indian

Hobbies : Listening Music & Net Surfing.

Languages Known : English, Hindi

Permanent Address : Mohalla- Kailashpuri, Ward no – 11

PO + PS - Dumra

Distt: Sitamarhi-843301

State – Bihar

Contact Number : +91-979*******

DECLARATION

I hereby declare that the above mentioned information is correct up to my knowledge & I bear the responsibility for the correctness of the above-mentioned particles.

Place: New Delhi (Vikash Kumar)

Contact this candidate