Engineer Design
Resume:
R.SHIVASHANKAR ME (Structural)
Thiru Nagar, Villivakkam,
Chennai - 600 049.
State : Tamilnadu,
country :India.
E-Mail Id : ****************@*****.***
Cell Phone : 098******** / 875*******
Passport No. & Expiry Date: L 6098286 /31-12-2023
Principal Engineer (Civil and structural)/Lead Civil and Structural Engineer (civil and structural) Chartered Civil and Structural Engineer (India).
EXPERTICE IN: Structural Engineering - Stadd-Pro, E-Tabs, SAP, SAFE, Ansys10, Metro Underground Stations Expertise in High Rise Buildings and Special Structures –Oil and Gas /Food and Chemical Industry. Well experienced in various international Codes like ACI 318 ASCE-07 AISC BS 8110 and EURO Codes . With Valid United States B1 Visa up to 2019.
EXPERIENCE RECORD
Total Years of Experience: – 18 + Years
EXPERIENCE-I
28 DEC2012 TO TILL DATE
GS Engineering &Construction –SAEC-Gurgaon-Haryana-India
POST HELD
Principal Engineer-Civil Architectural & Structural ( CAS)
PROJECTS
(1)CFP-CLEAN FUEL PROJECT OF Kuwait National Petroleum - Working as Area Lead Engineer (CAS) for Unit 25 and Unit 26 CCR Unit Main ` rack Revamping for additional –Checking the Adequacy of existing structure for additional load by Revamping Philosphy.Steel Structure have strengthened by providing additional Bracing Members.Foundation have been strengthened by providing Tie Girder and Modification/Extension of Footing by Hilti Rebar system.
(2)ARP-STAR Project IZMIT -TURKEY–Working as Deputy Lead Engineer (CAS) in addition to Area Lead for Offsite and Utilities for the ARP STAR Project (SOCAR AND TURCAS) . In this Upstream Project GSOC executed the following units which are listed below. GSOC also acted as a Civil Lead in the Consortium consists of GSOC, TROC (Tecnicas & Reunidas) and SPOC (Saipem Engg).
U-600 –interconnecting Pipe Rack -4.5kM
U-610-Sulphur Loading Area
U-620-Crude Tank Farm
U-630-Intermediate Storage Unit( LPG Tank farm)
U-640-Deisal Tank Farm
U-660 Flare A/B & U-500 ( Utility)
U-120 –NHT
U-130-KHT
U-160-CCR
U-420-Amine Regeneration Unit & U-430 ( Sulphur recovery Unit)
Total Man hrs allotted to CAS: - 1.15Lakhs (Out of which 40000 manhrs have handled by the Undersigned for offsite.( Excluding the Change Orders Claimed)
Total Man power allotted -55
Engineers – 25
Designers -30
Tonnage of Steel Qty released for Fabrication of Interconnecting and Offsite unit Pipe rack- 12000MT by the Undersigned ( out of total 27000MT steel for the entire Project)
Total Quantity of Foundation Concrete Quantity Released-25000Cum for Inter connecting Pipe rack (Out of 50000Cum of Concrete for the entire Scope of GSOC).
As Civil Lead –GSOC has developed the Design Criteria, Specification and Calculation Template for Pipe rack, Equipment Tech structure (Both Dynamic as well as Static) has been developed by the Undersigned during Early Engg Stage. The Turkey Izmit Site is a High Seismic Zone, Hence Seismic provisions in accordance with AISC-341 have been considered accordingly the salient points are considered in design of structures.
(1)Highly ductile Member and Moderately ductile Member according to type of Structure framing whether SMRF or OMRF respectively.
(2)Beam Column Connection where detailed for ductile detailing such that high energy is absorbed during earth quake.
(3)Vertical bracings and its connection are designed for over strength Factor (OSB).
(4)The base plate connection is designed for OSB.
(5)All Base plate in which Member to Plate welding connection are provided with demand critical weld.
NSRP-VIETNAM –Worked as Lead Engineer for the NSRP Vietnam Project and involved in the Early Engineering deliverables viz Design Criteria, Job instruction for CAS, Calculation templates, Preliminary AOC design for the entire complex by In filled water system, MTO preparation and Deliverable List for entire project ( Travelled to GSK Seoul for Early Engg works)
RABIGH-II-SAUDI ARABIA –Worked as Quality Control Engineer for the RABIGH –II Project and Involved in the Checking of Interconnecting Pipe rack deliverable.
TRAINING ACTIVITY –Involved in the training material preparation for
(i)Introduction to Pipe Rack Design for Civil and Structural Engineers
(ii)Introduction to Seismic Analysis-( Response Spectrum Analysis)
EXPERIENCE-I I
02 NOV 2009 TO 02 NOV 2012
Dow corning corporation-Global capital engineering Chennai HQ-Michigan- United States of America
POST HELD
Principal Engineer-Civil Architectural & Structural
Handling a team of 7 Engineers and designers - Involved in Various Capital
Projects and Proposals design of Dow Corning Silicon
Manufacturing facilities.
PROJECTS AND ACHEIVEMENTS
S4G-Siloxane tank farm project in-Clarksville- United states of America- Involved in detailed engineering project –Reduced the FEL-III Civil Project cost by 5% and delivered construction Packages with in stipulated time and with full detail to the satisfaction of client. Also visited the United States for Model review meeting review meeting.
GLR-Polymer project –at Zhangjiagang China-Front End Loading Package –Visited China FEL-III review and Released the FEL-III package with in the stipulated time and resources.
Linear stripper Structure Project-Carrollton United states of America- detailed Engineering project-Finished the project well within the Stipulated time and Schedule.
Black sea Emulsion Manufacturing Process with clean room design at Turkey-FEL-III Package
Vopak HCL Storage terminal for Dow Corning Barry –FEL-III Package
OH-Polymer project -Detailed Engineering in Zhangjiagang – Shanghai -China. Completed detailed Engineering design and saved $0.25million by utilizing the existing by strengthening the Beams as per GB code requirement.
EXPERIENCE-III
NOV-2008 TO OCT 2009
Mott -Macdonald –Chennai. (HQ- Croydon UK)
POST HELD
Principal Engineer (Civil and Structures)
Handling a team of 4 Engineers and 7 designers - Involved in Various
UK Building Projects.
PROJECTS
DMRC-AMEL-C1 New Delhi Underground Station Block Design Review (Bottom Up Construction) and Complete Design of Multi Storey Car Park Block at New Delhi Station.
Mater Station –Dublin Metro Project Top –Down Construction –involved in Fire Vent out Block Structural Design-completed the primary design on time within budget.
Detailed design for a School Building in UK-Steel Structural building as per BS code.
Royal Welsh College of Music -Raft Slab design for Award winning Royal Welsh College of Music in Walsh-UK.
EXPERIENCE-IV
AUG-2007 TO NOV-2008
Dar Al-Handasah Shair and Partners
Cairo-Egypt- Leading International Consultants
POST HELD
Senior Structural Design Engineer
PROJECTS
Design of High Rise Buildings of Middle East Country Project
Pearl Qatar Building- Doha Qatar
Madinaty Infrastructure Project Cairo-Egypt.
King Abdullah Economic City at Saudi Arabia-Infrastructure development-Underground Tank and Interceptor Tank design.
Korak telecom Corporate Building tower design in Iraq-High Rise Building
EXPERIENCE-V
ME( Structural Engineering) – Studied full time Master
of Engineering under GATE Scholarship in Government
College of Technology –ANNA UNIVERSITY
POST HELD
STUDENT- During Course of study, I have been assigned to various structural consultations through Dept of Technical Education –Govt of Tamil Nadu.
PROJECTS
Retaining Wall Stability Analysis Of Waste Water Treatment
plant of TWAD Board At Erode (TN)-Value-Rs 2 Crores.
Design of Bridge Cum Car Parking Slab For Connor Municipality –Nilgiri District-Value- Rs 40 Lakhs
EXPERIENCE-VI
April 1995 to July 2005 (10 Years)
FCI-(Food Corporation of Indi)-GOVT OF INDIA UNDERTAKING
(VARIOUS LOCATIONS OF INDIA).
POST HELD
Engineer (Civil and Structural)
PROJECTS AND ACHEIVEMENTS
The following projects have been carried out at FCI Zonal Engineering Centre –Chennai.
Design of “C” Wing of Zonal office Building and construction –Chennai.
This RCC framed structure was design based on IS 456-1978 using SP-16 1980 Design Aids.
Design of FCI Regional office Building and Construction at Bangalore.
This RCC framed structure was design based on IS 456-1978 using SP-16 1980 Design Aids.
Standard Steel Truss design using IS 800 : 1984 for all Food Storage Depot.Standard Steel Trusses Design using tubular Section for steel cost reduction in the place of Angle sections.
Design of Over Head Tank at FSD Egmore –RC Circular Type Water tank with RC Column Staging Type Design and Construction.
Design of FCI Regional office Building and Construction at Trivandrum.
This RCC framed structure was design based on IS 456-1978 using SP-16 1980 Design Aids.
Design of Generator foundation for Zonal office building of FCI –Chennai.
This Generator foundation design was based on IS 2974(Part IV)-1979 FOUNDATIONS FOR ROTARY TYPE MACHINES OF LOW FREQUENCY
Design of Administrative Building and construction at FSD Payyannur (Kerala) Including Railway Siding Construction Value Rs:-Rs 3 Crores.
Design and construction of FSD Wayanad depot in Kerala under RPDS scheme. The safe bearing Capacity for this site estimated based on IS 6403 – 1971-Code of Practice for Determination of allowable Bearing Pressure on Shallow foundations.
Design of office buildings and UG systems inside FSD Amalapuram in Andhra Pradesh.
Design of office buildings and UG systems inside FSD complex at FSD Jammikunta and complete layout study of FSD Jammikunta in Andhra Pradesh...
Design review of 2.1 ETKM FSD Mavelikara Railway Siding.
OTHER ASSIGNMENTS
Complete planning works of all food grain storage complex funded by world bank right from the inception of land acquisition, conceptual planning of storage complex, design, preliminary estimate including estimating the volume of earth work etc, liasioning with architects, etc, technical sanction of the estimate of the project, draft NIT (notice inviting tender) approval, computerization of entire civil engineering works, bill checking, complete project monitoring using MS project.Liasioning with Railways for the Complex Railway siding Construction.
EDUCATIONAL AND TECHNICAL QUALIFICATION
Sl.No
Name of the Course
Board/Institution Name
Year of Passing
Percentage
Remarks
1.
MASTER OF ENGINEERING-(STRUCTURAL ENGINEERING)
GOVT COLLEGE OF TECHNOLGY-ANNA UNIVERSITY
2007
81.50%
First Class With Distinction
(Studied with GATE Scholarship)
2.
GATE-CIVIL ENGG
MHRD
2005
85.01%
3.
AMIE-CIVIL ENGG
THE INSTITUTION OF ENGINEERS (INDIA)
2002
60%
Section –A and Section B Passed
4.
DIPLOMA IN CIVIL ENGINEERING
CENTRAL POLYTECHNIC-
1992
70%
First Class With Distinction
5
SSLC
THIRU-VI-KA-HSS
CHENNAI
1989
80.1%
First Class With Distinction
Declaration
I hereby declare that all the particulars given above are true to best of my knowledge and belief.
Date : 10-04-2016
- sd-
Place : Chennai (R.SHIVASHANKAR)
Contact this candidate