.

David A. Williams 903-***-**** {cell} **** McCann Rd Apt #308 903-***-**** {other} Longview, Texas 75605 actoel@r.postjobfree.com

OBJECTIVE: To obtain a challenging position with stability and the opportunity to utilize my skills, abilities and previous training in an effective and productive manner.

Summary of Qualifications: Committed to high safety standards complying with safety policies and regulations. Team player, works well with others and willing to assist wherever needed. Good leadership skills but also willing to follow instructions. Hard worker, reliable, experienced, works well under pressure and dependable.

Training and Certifications:

TWICS Card Water Survival Training

PEC Safe Gulf Training G.O.M. Competence Function Training

Assoc of Reciprocal Safety Councils, Inc.

T-2 Certified

Work Experience:

War Fab Industrial – Hallsville,TX

Turbine Mechanic/Millwright

2/2015 - 4/2015

Dismantle and installing machinery and industrial service equipment including ventilating and heating systems on turbines, compressors, lube oil and hydraulic systems. Align machines and equipment using overhead cranes, jacks and various hand tools. Assemble and install equipment using hand and power tools. Repair and lubricate machines and equipment. Identify and assemble steam and gas turbine parts. Replace defective parts and adjust clearances of machines; align moving parts; align machines and equipment using hoists, squares, rules, micrometers and plumb bobs. Tested units to evaluate mechanical operation by connecting power unit to machines or steam piping to equipment. Insert shims, adjust tension on nuts and bolts, or position parts using hand tools and measuring instruments to set specified clearances between moving and stationary parts. Follow safety policies and procedures. Worked with T.L. casing shears, knowledgeable of the Acoustic Diagnostic System as well as worked with stacks using single, double and triple cavities.

Enerstaff Agency – Houston,TX

Millwright

5/2015 - 7/2015

Aligned machines and equipment using overhead cranes, jacks and various hand tools. Identified and assembled steam and gas turbine parts. Follow safety policies and procedures. Worked with T.L. casing shears, knowledgeable of the Acoustic Diagnostic System as well as worked with stacks using single, double and triple cavities. Dismantle and installing machinery and industrial service equipment including ventilating and heating systems on turbines, compressors, lube oil and hydraulic systems. Conduct preventive maintenance and repair and lubricate machines and equipment. Dismantle machines and equipment for shipment to installation site. Connect power unit to machines or steam piping to equipment and test unit to evaluate mechanical operation. Replace defective parts of machine or adjust clearances and alignment of moving parts. Assemble and install equipment using hand and power tools. Align machines and equipment using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs. Dismantle machines, using hammers, wrenches, crowbars, and hand tools. Lay out mounting holes, using measuring instruments and drill holes with power drill.

Cameron International - Berwick, LA

Assembly Technician

10/2012 – 1/2014

Build various bonnets, including T.L., tandems, and EVO's on the B.O.P.'s. Also work with left and right hand bonnets. Assisted with test procedures of 22,300. Assist with 500 PSI to 1500 PSI to open and close the B.O.P's. Assisted in building B.O.P. stacks, mini connectors for the gas bleed lines and conducted torch procedures. Worked with TL tandem boosters, 10k 18 3/4 and 15k 18 3/4 flanges. Also work with T.L. casing shears, knowledgeable of the Acoustic Diagnostic System, and work with stacks using single, double and triple cavities. Worked as a turbine gas and steam mechanic, dismantling & installing machinery and industrial service equipment; including ventilating and heating systems on turbines. Lube oil and hydraulic systems of the turbines. Align machines and equipment using overhead cranes, jacks and hand tools. Identify and assemble steam and gas turbine parts. Worked with squares, micrometers, lasers and plumb BOBS. Ability to use all hand tools and follow safety policies and procedures.

SWECO Well Head Services - (Victoria, TX)

Assembly Technician

7/2012 - 10/2012

Build and rebuild valves of various sizes, safety valves, actuators and well head and production trees. Also build 4 and 5 inch trees. Assemble all types of casing heads, nipples, and bull plugs. Rebuild tubing hangers from 2 3/8 to 2 7/8. Operate valves on the manifold. Open valves as needed to frac wells and wireline wells as needed. Nipple up goat heads to frac trees, flow loops, frac manifold skids and skids to the collection block. Assist in greasing the manifold valves and suave valves off the well head trees. Assist in pump down and flow back procedures, tear down and put back together frac valves as needed.

T3 Energy Service – Well Head Division: (Longview, TX)

Assembly Technician

2/2010 – 2/2012

Build and rebuild valves of various sizes, safety valves, actuators, well head and production trees. Also build 4 and 5 inch trees. Assemble all types of casing heads, nipples, and bull plugs. Rebuild tubing hangers from 2 3/8 to 2 7/8. Worked on special project at Shell Marcellous in Pennsylvania and Elmira, New York. Operate valves on the manifold. Open valves as needed to frac wells and wireline wells as needed. Nipple up goat heads to frac trees, flow loops, frac manifold skids and skids to the collection block. Assist in greasing manifold valves and suave valves off the well head trees. Assist in pump down and flow back procedures, tear down frac valves and putting back together as needed.

Bucyrus Field Services: (Kilgore, TX)

Service Technician

12/2008 – 1/2010

Pulled down bull gears and dollar plates. Changed and pulled tracks off drag line. Assisted with rigging equipment, motors, pumps and fuel filters. Perform production duties at various mine sites. Assist with repairs of equipment and monitor equipment for safety requirements and maintenance needs. Perform other duties as assigned.

Capacity of Texas: (Longview, Texas) Sandblaster/Maintenance Tech 2005 - 2007 Prepare and sandblast all large and small parts or objects before moving to paint area. Clean area around blasting booth and surrounding area. Assist with mechanical needs such as change valves, pumps, motors and conveyor belts. Assist with annual inventory and in various areas as needed.

Tetra Technologies: (Palestine, Texas)

Production Operator

2004 – 2005

Performed natural gas flow back on fracked wells; monitored pressures and recovering water used in the process; cleaned wells and released to assigned production group.

Pride International: (Houma, Louisiana) Roustabout/Roughneck (Offshore) 1998 - 2004 Assist in tripping drill pipe in and out of the hole. Assist with on and off loading supplies to the boat. Moving supplies and equipment to work area. Assist with top drives, changed cables as needed. Worked on hydraulic pumps and lines. Hooked up lines to B.O.P.'s. Load and stack equipment. Assist in pump room and mud room. Mixed and tested mud and cement as a shaker hand. Served as derrick hand as needed while working with monkey bars and standing up drill pipes into the columns. Separated joints to be placed into holes. Assisted motor man, checked motors and pumps. Assist with repairs of equipment and monitor equipment for safety requirements and maintenance needs. Respond to emergency situations. Perform general maintenance duties.

Danos & Curole Marine Contractors: Tankerman/Deckwatch (Offshore) 1995 - 1998 Connect hoses from terminals to ships. Perform pipe fitting duties. Assist with tripping and measuring pipe. Load pipe on and off rig, check lines, pull lines. Assist mooring master. Assist in pump room and mud room. Inspect for leaks into the Gulf of Mexico. Assist with on and off loading of passengers. Cleaning, maintaining and assisting with repairs of drilling equipment. Assist with lifting, using ropes and winches. Respond to emergency situations. Perform general maintenance duties.

Education: Graduate: Bunkie High School; Bunkie, Louisiana

Contact this candidate