Mechanical Engineer Project

PROFILE:

Expertise in design and QC management for commercial and industrial buildings projects.

Specializes in managing mechanical design and experienced in using the latest computer design tools, with special focus on cost and quality issues.

Experienced in managing design teams which includes performing quantity take off, cost estimating, quality control issues and field inspection.

Professional expertise also includes managing the review of construction drawings and specifications, perform constructability analysis, coordinate subcontractors, manage schedules, meet deadlines, and ensure all QC activities are performed.

Skilled in design standards including knowledge of AHRAE standard, International Mechanical, Plumbing and Building Code, NFPA standard and proficient with CAD system.

Experienced in Mechanical Engineer management which includes HVAC & Plumbing System Design, building load calculations, selection of appropriate A/C equipment, duct and piping system sizing, managing specifications,

Documented site information, updated details per the latest codes and standards, quality assurance and compliance, initiating meetings with clients to achieve their desired goals,

Team leadership also involves managing designers and CAD drafters and coordinated project completion among all parties.

Independent thinker and good business sense, which can be demonstrated through leading, organizing and made decisions under difficult circumstances.

Familiar with LEED standards requirements.

HVAC Load Calculation Program: Carrier HAP V.4.5, Elite

Computer: Windows applications, Microsoft Office, AutoCAD (V2004 - 2014)

Language Skills: English, Arabic, and French

PROFESSIONAL REGISTRATION

EIT, State of Arizona- Board of Technical Registration, No. R070122

UPDA – GRADE A, Doha-Qatar

PROFESSIONAL EXPERIENCE

Sr. Mechanical QA/QC Engineer, FTR International INC, November 2013 – September 2015

(King Abdulah Bin Abdulaziz Project – Third Saudi Expansion of Holy Haram Makkah & Surrounding Areas)

Responsible for QA/QC of the HVAC & plumbing system installation, and in charge in managing the following tasks:

Ensured the project plan and procedures are activated at site. Performed inspections of installations.

Developed and maintained inspection procedures and techniques, throughout the construction

Reported on daily inspection and tested activities and issuing non-conformance reports when the specification or procedural requirements are not met.

Maintained inspection and testing records.

Conducted surveillance on the inspection tests required in the technical provisions of the specification.

Ensured that all the materials purchased and processed for the manufacturing are handled in a manner that ensures that no damaged or deterioration occurs.

Established the requirements for the handling of products.

Ensured that all personnel information has been obtained in accordance with customer requirements.

Sr. Mechanical Engineer, KEO International Consultants, Doha-Qatar, October 2008 – October 2013

Engineering heat and cooling load calculations to determine air conditioning and heating equipment sizing.

Selection and specifying the Air conditioning equipment for installation on buildings.

Adapted specifications to specific job requirements.

Responsible for plumbing design including water, gas and waste piping sizes for buildings.

Selected and specified plumbing equipment, water heaters, and fixtures complying with ADA requirements.

Surveyed site for existing equipment for remodel work.

Observed site and reported writing for compliance of construction to plans and specifications.

Diverse design project experience with HVAC & Plumbing design services to the following:

Abu Dhabi Islamic Bank headquarters Building, Abu Dhabi, UAE: Two 10 story office towers above a ground and mezzanine with a linking multi height atrium apace at ground floor level.

Ghanem Residential, Doha, Qatar : 9 residential buildings of 8 stories each with project sizes $100 millions

State Audit Bureau, Doha, Qatar: 2 towers, first one is for offices consist of 31 stories and the other is residential tower consist of 28 stories with 3 underground stories for car-park with project sizes up to $200 millions

The Regent Hotel, Doha, Qatar: Luxury 5 stars hotel consisting of 8 stories including standard hotel rooms, suites, penthouses, presidential suites and bungalows.

Sr. Mechanical Engineer, OBI, Overseas Bechtel Corporation, May 2010 - November 2011

New Doha International Airport (NDIA), Doha, Qatar with project sizes up to $18 Billion:

Took corrective action as needed during projects and/or consulted with construction Project

Responsible with resolving issues that arise during projects.

Reviewed shop drawings and material submittal provided by the contractor.

Answered the RFI provided by the contractor.

Oversaw contractors and vendors/suppliers performing work on the project.

Coordinated proposed changes in design with consultants and construction manager while maintaining schedule and budget.

Reviewed recommended and approved all construction change requests.

Sr. Mechanical HVAC & Plumbing Designer, Intech Engineering Group, AZ-USA, July 1999 – October 2008

Engineering heat and cooling load calculations to determine air conditioning and heating equipment sizing.

Selection and specifying the Air conditioning equipment for installation on buildings.

Adapted specifications to specific job requirements.

Responsible for plumbing design including water, gas and waste piping sizes for buildings.

Selected and specified plumbing equipment, water heaters, and fixtures complying with ADA requirements.

Surveyed site for existing equipment for remodel work.

Diverse design project experience with HVAC & Plumbing design services to the following industries

1.Educational Institutions and Schools

oTutor Time Child Care (infants to preschool) various locations throughout Arizona

oMini School (infant to preschool) in Arizona and Texas

oArizona Culture Academy in Phoenix (Preschool to High school)

oTri-city Church & School (60,000 SF incl. sanctuary, gym, and classrooms for preschool to high school)

oTI & remodeling design for University of Phoenix, (various locations throughout the US)

2.Hospitality Industry, Hotels, Restaurants

oThe Regent Hotel Doha, Qatar : 12 story 5+ star hotel with project sizes $100 millions

oResidence Inn Marriott: 60,000 SF, 140 rooms, Phoenix, Arizona

oSpringhill Suites Marriott : 60,000 SF, 140 rooms in Phoenix, Arizona

oRestaurants, cafés, shops Sky Harbor International Airport and Salt Lake International Airport, Wendy’s, Starbucks, Dick Clark, Kokopelli, Pueblo de Tequila, Cinnabon & Sbarros, Paradise Bakery (various locations throughout Arizona), Chinese Restaurant, Taco Delmar, Oasis, Waffle House, Eatza Pizza (various locations throughout Arizona)

3.Medical buildings & Offices.

oMRI for Arizona Diagnostic Imagining: new MRI unit installed in existing tenant space

oRenal Care Center, Phoenix, AZ - Twenty-four station kidney dialysis center with support areas

oDesert Samaritan Hospital, Mesa, AZ - 20,000 SF new emergency room

oDesert Samaritan Hospital, Mesa, AZ - 10,000 SF heart surgery suite with 2 new surgery room and all associated support areas

oPhoenix Memorial Hospital, Phoenix, AZ - 8,000 SF new emergency room

oDr. Gary Steen, Phoenix, AZ: Dental office with 8 dental positions

oUkiah Medical Center, San Diego, CA - 2 story Medical offices

oOcotillo Animal Clinic, Chandler, AZ - Including surgery & treatment room, animal eye care & dental

4.Commercial Industrial Facilities: dealerships for the New Peoria Mercedes, BMW, Toyota, Nissan and Chevrolet, with project sizes 5 to $ 15 million

5.Religious Institutions and Churches with project sizes 2 to $5 millions

Various locations in Arizona, California, Florida, Hawaii, Illinois, Indiana, Missouri, Texas, and Washington

6.Scottsdale Airport: 2nd floor expansion of 6,000 SF.

Mechanical Designer Engineer, ALI-Port INC, Montreal - Canada, January 1995 – July 1999

Specifications, blueprints, sketches, and models.

Compute dimensions, sizes, and shapes based on descriptions.

Design parts and procedures to manufacture and assemble tools and dies.

Verify dimensions, alignments, and clearances of finished parts using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.

Ensure all documentation is maintained, including associate documentation.

Work with vendors and/or contractors.

Design and development of improving methods and equipment through continuous improvement and standard manufacturing principles.

EDUCATION

Attestation of Professional Studies - Design & Drawing Assisted by Computer, Cooper Johri Training Center Montreal, Canada 1998

Diploma of Professional Studies - Operating Computer Equipment, Collège d’ Administration et de Commerce, Montréal, Canada 1994

B.S., Mechanical Engineering, University Of Damascus, 1985

Contact this candidate