Pradeep Jinde

acs9l8@r.postjobfree.com

770-***-****

Summary:

Over all 8+ years’ experience in the area of System/SAN/NAS, FC Switch administration and development. Which includes, implementation of SAN server/storage consolidation/migration, UNIX/Solaris(8&9,10) & Windows OS installation, partitioning, configuration and TCP/IP networking.

SAN Skills:

●Installing Vmax 3, cabling FA’s to Cisco 9710.

●Configuring Vmax3 as per company standards.

●Skilled in configuring and troubleshooting SAN’s (CLARiiON – Symmetrix – DMX,Vmax, Vplex,VNX, Isilon) using Navisphere Manager,Unishpere,Solutions Enabler, Solutions Performance analyzer, EMC Control Center, SYMCLI

●Monitoring alerts from switches, San frames working for the resolution with concerned teams and venodors.

●Configured and managed following EMC SAN storage arrays Symmetrix 8830, 8430 DMX 1000, 800,4/3/2000,VMAX Clariion C3-80,CX3-60,CX700,CX600,CX500, NAS (CNS14, CFS14, NSX Series - NS 500 /600/700,240,480 Fabrics MDS 9506, 9509, 9216, ED140M, ED64M, DS-16/32B

●Experienced in Backup and recovery administration using BCV, Clones and Snapshots,SRDF

●Have installed and configured Power path fail over software on hosts for load balancing and path failover mode for Calriian and Symmetrix

●Extensively experienced with the performance tuning and planning for consolidation of storage

●Proficient in configuring and administering SAN Fabrics with switches like Mcdata and Cisco using Connectrix manger, Fabric manger

●Day to performance monitoring using Symmetix Peformance analyzer and Symmetix Management console.

●Zoning for new host’s, cleaning up zones for disposed host’s.

●Free up storage space on VMAX for further storage provision.

●Working experience in managing pools using FAST policy.

●Monitoring path outages using SAN Screen and Powerpath Viewer.

●Experienced in Solaris administration, Solaris 7,8 and 9 with Veritas volume manager and good knowledge in windows administration WINNT,2000,2003,XP.

NAS Skills:

●Worked on day to day allocation and monitoring alerts for Celerra.

●Worked on replication of filesystem for backup and Disaster recovery of production host’s.

●Have good working knowledge on Isilon NAS.

●Day to day Netapp file storage allocation for NFS, CIFS and mixed protocols.

●Experience in implementing, administering and maintaining NetApp FAS6040, FAS3070, R200, FAS980.

Migration and Disaster Recovery:

●Experienced in migrating data between different NAS arrays using a wide range of Migration Tools (synciq, robocopy, emcopy, VNX replicator,isi_vol_copy, rsync, snapmirror).

●Migrated storage from expired frames to new frames using Open Replicator, Powerpath Migration Enabler (PPME) and SRDF.

●Configured SRDF pairs to replicate data from PROD to DR sites.

●Configure SRDF RDFG groups for new projects to replicate the data.

Scripting and Reporting:

●Wrote scripts to automate weekly base storage reports

● Automated perl and shell scripts to find the FA bit settings on VMAX and change bit settings the environment stadards.

●Wrote perl script to automate day to day auto provisioning commands.

●Wrote VBA script to get vmax capacity report from all the vmax’s at different data centers.

●Wrote an VBA script to generate list of pwwn’s and port description match or not for switch migration.

●Experience in understanding the complex issues related to storage, Root cause analysis of the issue and troubleshooting it to the management satisfaction

●Worked on code upgrades for clarion, Switches,Celerra.

●Ability to work independently or in a team. I organize my own work

●Wrote Perl Script to find single path servers in active zones

●Wrote Perl Script to find hanging zones in active zoneset and helped in removing the zones to reduce the zone count in a zoneset.

Technical Skills:

Software Tools : SPA,SMC,Powerpath Viewer,ECC, SYMCLI, TimeFinder solutions, Navisphere Manager, SAN copy, Snapview, Mirrorview,,Open Migrator 3.7,Clones, Connectrix manager, fabric manager, Storage Scope, performance manager, VERITAS volume manager,Legato Networker,Disk extender,Email extender

Hardware : Clariion CX4-120,CX 3-80,CX 3-60 700/600/500

Symmetrix VMAX-1,8830,8430,8530

NAS (NS120,NS480,NS40,NS 20,CNS14, CFS14, NSX Series - NS 500 /600/700,Isilion, Vplex, Vblock, Integrated and Gateway systems,CiscoMDS 9216/9506,Brocade M6140, Mcdata ED 64M2,tapelibraries (4mm,8mm,DLT 7000,DLT 8000), autochangers(Libra 8/4 ), Qlogic QLA2310 and Emulex LP 9002 HBAs Solaris SUN FIRE 280

OS : Windows 2000/NT/XP,UNIX,Solaris 7/ 8/9,10

Migration : Open Replicator, Powerpath Migration Enabler (PPME), San copy

Languages : C,C++,Shell Scripting, Perl,Java,VBA,Python,Haboop.

Education:

Master of Sciences : Electrical and Computer Engineering (VLSI Major) Southern Illinois University at Carbondale, Carbondale, USA.

Bachelor of Engineering: Electronics and Communications, Periyar University, Salem, TN India

Work Experience:

Bank of America Feb-2014- Till Date

Role: NAS / SAN Administrator

Involved in data/host migration support for Netapp storage to Celerra/VNX using rsync, robocopy and emcopy.

Installation and Administration of NetApps Storage. Creation of Aggregates, volumes and mapping of LUNs to Windows & UNIX hosts.

Configure volumes for CIFS and NFS in NetApp NAS environment

Configure Snapshot schedule for volumes or aggregates on NetApp Filers.

Choose the right RAID level for high performance and high availability on NetApp Filers.

Configured VIFs and VLANS in Netapp Environment.

Monitoring and forwarding Syslog messages on NetApp Filers.

Backup and restore data from Tape Libraries using ndmpcopy, dump, restore in NetApp NAS Environment.

Configured new Vmax3 as per bank standards.

Adding new Mds 9513 switch to existing fabric by coordinating datacenter facilities to add ISL

From new switch to core switches configuring port channels adding ports to the port channesl.

Installing new switches by configuring the new mds 9513s to current standards, requesting for network cables, ip addresses, selecting the ports for ISL’s, selecting SFP speeds, setting up ssh connections, enabling call home and adding the switch to FMS.

Increasing ISL’s bandwidth as and when required as per our company standards.

Upgrading Fab 1 to Fab3 cards working closely with SAN OPS and System Admins and make sure that they don’t lose SAN Connections at any given time.

Configuring FCIP on switches for remote replication.

Blocking the ports on storage edge and host edge as an when required by storage and hosts are decommissioned.

Wrote a Perl script to generate Device alias for hosts missing device alias from zones names.

Wrote Perl script to find single path servers and notifying server team to correct the paths before change implementation day.

Wrote Perl Script to find stale zones in active zoneset. This script helped a lot in cleaning up the stale zones and reduce the zone count in a active zoneset.

Involved in Mcdata to Cisco MDS 9710 migrations.

After migration to check if correct pwwn’s and port description on target switch, wrote VBA script to check if pwwn and port description match as requested.

EMC2 Corporation July 2010- Jan-2013

Role : SAN and NAS Administrator

● Celerra to VNX file data migration projects using rsync,emcopy and Celerra Replicator V2

●Configured and Managed SAN Environment consisting of VMAX,VNX DMX 4x/3000 and DMX 1000, Clariion CX4-120,CX3-80,CX 3-40, CX 700. Brocade silk work 48000,DCX, using SymCLI, Symmetirx Performance Analyzer,Symmetrix Managemnt Console,Navisphere Manager, EMC Control Center, Connectrix Manager

●Provisioned Storage from VMAX, DMX 4x/3000/1000 using SymCLI 7.3 and ECC 6.0 and CLARiiON 700 through Navisphere Manager to multi-vendor host.

●Performed Mapping, Masking through SymCLI for the devices provisioned from DMX to Windows and UNIX hosts

●Using Borcade Connetrix Manager and Brocade CLI created new zone and added them to existing active zoneset on Brocade 48K,DCX Directors and activated them

●Consolidated existing storage by migrating from Clariion CX 700 to a higher capacity and faster performance VMAX using Open Replicator or Powerpath Migration Enabler.

●Migrated data from older DMX to new VMAX using Open Replicator host pull technology.

●Configured point-in-time BCV mirror copies of production data and provisioned them to backup hosts using Timefinder local storage replication solutions

●Designing and migrated data from DMX1000/3000 to new DMX-4’s using Symmetrix Remote Data Facility (SRDF)

●Creating and deleting Dynamic SRDF pair’s for the migration’s

●Configured and monitored a disaster recovery solution for Tier 1 applications using SRDF/A remote storage replication solutions and ensured the consistency of the groups

●As NAS Administrator assigned storage to Celerra fileserver and created filesystems and Configured CIFS and NFS.

●Was involved in NAS DART code upgrade from 5.6.51.3.

●Monitoring the VMAX FA utilization, backend DA utilization using SPA(Unisphere).

●Installed and configured ECC alerts to monitor the SAN environment for Symmetrix, Clariion, and Switches & Hosts and attached management policies to include Email/Console notifications

●Identified performance issues, located bottlenecks and diagnosed using Symmetrix Performance manager.

●Improved asset utilization and performance to provide higher service levels with greater efficiency using Storage Scope reporting and Performance Manager / Work Load Analyzer and resolved the capacity allocation and utilization issues

●Have worked with power path and MPIOfor failover and load balancing on new Clariian CX 3-80

●Responsible for monitoring, troubleshooting and resolving routine issues like one-path-down, hosts not seeing storage etc

●Wrote PERL script to automate day to provision commands.

●Wrote PERL and shell Script to check the single or multiple or all the FA bit settings on VMAX’s and change the bit settings accordingly.

●Wrote a shell script to find hanging zones and alias on switch and cleaned up all the hanging zones and alias.

●Wrote scrip to rename to their corresponding host names of all the host pwwn; which were not renamed during the storage allocation.

●Wrote script Shell to delete all the hanging pwwn’s and zones on each FA of VMAX.

●Proactively took completed training on Netapp,VPLEX, Isilon, Atoms and Avamar backup.

●NAS day to day provisioning and monitoring the alerts and setting up replication for

Isilon Activities:

●Installation and setting up the cluster.

●Manage storage from CIFS and NFS clients

●Managing sanpshots, sincIQ for remote data replication.

●Maintaining Isilon using InsightIQ.

●Have lap experience in Netapp NAS and SAN.

●Creating aggriagates,vlomumes, felx volumes, qutrees and exporting or sharing for NFS or CIFS.

●Creating and scheduling Sanpshots using Netapp Snapshot technology.

●Migrating data using Netapp SnapMirror thechnolgy.

Cisco Systems INC Nov-2009-July 2010

Role : SAN and NAS Administrator

Responsibilities:

●Configured and Managed SAN Environment consisting of DMX 4x/3000 and DMX 1000, Clariion CX3-80,CX 3-40, CX 700 Mcdata ED 140-M and Cisco MDS 9509 directors using SymCLI, Navisphere Manager, EMC Control Center, Connectrix Manager and Fabric Manager

●Provisioned Storage from DMX 4x/3000/1000 using SymCLI and ECC 6.0 and CLARiiON 700 through Navisphere Manager to multi-vendor host.

●Performed Mapping, Masking through SymCLI for the devices provisioned from

DMX to Windows and UNIX hosts

●Using Cisco Fabric Manager 3.1(3a) and Cisco CLI created new zone and added them to existing active zoneset on Connectrix Cisco MDS 9506 Directors and activated them

●Created multiple VSAN’s for the Cisco switch. Created new zonesets for each VSAN

and configured zones for each zoneset

●Consolidated existing storage by migrating from Clariion CX 700 to a higher capacity and faster performance Clariion CX3-80 storage systems using SAN copy remote replication solutions

●Configured point-in-time BCV mirror copies of production data and provisioned them to backup hosts using Timefinder local storage replication solutions

●Designing and migrated data from DMX1000/3000 to new DMX-4’s using Symmetrix Remote Data Facility (SRDF)

●Creating and deleting Dynamic SRDF pair’s for the migration’s

●Configured and monitored a disaster recovery solution for Tier 1 applications using SRDF/A remote storage replication solutions and ensured the consistency of the groups

●As NAS Administrator assigned storage to Celerra fileserver and created filesystems and Configured CIFS and NFS.

●Migrated data from Windows to Celerra and Celerra to Celerra using CDMS Celerra feature

●Installed and configured ECC alerts to monitor the SAN environment for Symmetrix, Clariion, and Switches & Hosts and attached management policies to include Email/Console notifications

●Identified performance issues, located bottlenecks and diagnosed using Performance manager

●Improved asset utilization and performance to provide higher service levels with greater efficiency using Storage Scope reporting and Performance Manager / Work Load Analyzer and resolved the capacity allocation and utilization issues

●Have used power path for failover and load balancing on new Clariian CX 3-80

●Responsible for monitoring, troubleshooting and resolving routine issues like one-path-down, hosts not seeing storage etc

●Wrote PERL script to automate weekly storage reports in Symmetrix and Clariians

ENVIRONMENT: VMAX-1,UCS,DMX 3x/1000/2000/800, Clariion 3-20,3-40,700/500/300, Connectrix MDS 9509,9506, 9216, Mcdata ED140M2, 64M2, 32M2,Distributed ECC Infrastructure 52, Navisphere, Connectrix Manager, Fabric Manager, Device Manager, Core-Edge SAN Fabric, IBM Blade Center with Linux, Solaris, Windows, Legato Networker, Veritas Volume Manager

Arrow Electronics,Melville, NY. Sep’2009-Sep 2009

Role: Sloaris System Admin

Responsibilities:

●Applied recommended patches for Solaris 8,9 and 10 servers.

●Removed the Veritas Volume Manager 3.5 from all the servers and installed Veritas 5.0 in order to support EMC DMX.

●I was involved in migration of data from Hitachi to EMC symmetircs.

● Have installed drivers for newly replaced JNI to Emluex cards.

●Edited the configuration files to see the new devices from EMC.

●Have installed Power path for Multipath access Control

●Have mounted all the filessystem and volume groups.

Dick’s Sporting Goods,Pittsburg,PA Dec ’2008-Aug’2009

Role : SAN Administrator

Responsibilities:

●Configured and Managed SAN Environment consisting of DMX 4x/3000 and DMX 1000, Clariion CX3-80,CX 3-40, CX 700 Mcdata ED 140-M and Cisco MDS 9509 directors using SymCLI, Navisphere Manager, EMC Control Center, Connectrix Manager and Fabric Manager

●Provisioned Storage from DMX 4x/3000/1000 using SymCLI and ECC 6.0 and CLARiiON 700 through Navisphere Manager to multi-vendor host.

●Performed Mapping, Masking through SymCLI for the devices provisioned from

DMX to Windows and UNIX hosts

●Using Cisco Fabric Manager 3.1(3a) and Cisco CLI created new zone and added them to existing active zoneset on Connectrix Cisco MDS 9506 Directors and activated them

●Created multiple VSAN’s for the Cisco switch. Created new zonesets for each VSAN

and configured zones for each zoneset

●Consolidated existing storage by migrating from Clariion CX 700 to a higher capacity and faster performance Clariion CX3-80 storage systems using SAN copy remote replication solutions

●Configured point-in-time BCV mirror copies of production data and provisioned them to backup hosts using Timefinder local storage replication solutions

●Designing and migrated data from DMX1000/3000 to new DMX-4’s using Symmetrix Remote Data Facility (SRDF)

●Creating and deleting Dynamic SRDF pair’s for the migration’s

●Configured and monitored a disaster recovery solution for Tier 1 applications using SRDF/A remote storage replication solutions and ensured the consistency of the groups

●As NAS Administrator assigned storage to Celerra fileserver and created filesystems and Configured CIFS and NFS.

●Migrated data from Windows to Celerra and Celerra to Celerra using CDMS Celerra feature

●Installed and configured ECC alerts to monitor the SAN environment for Symmetrix, Clariion, and Switches & Hosts and attached management policies to include Email/Console notifications

●Identified performance issues, located bottlenecks and diagnosed using Performance manager

●Improved asset utilization and performance to provide higher service levels with greater efficiency using Storage Scope reporting and Performance Manager / Work Load Analyzer and resolved the capacity allocation and utilization issues

●Have used power path for failover and load balancing on new Clariian CX 3-80

●Responsible for monitoring, troubleshooting and resolving routine issues like one-path-down, hosts not seeing storage etc

●Wrote PERL script to automate weekly storage reports in Symmetrix and Clariians

ENVIRONMENT:: DMX 3x/1000/2000/800, Clariion 3-20,3-40,700/500/300, Connectrix MDS 9509,9506, 9216, Mcdata ED140M2, 64M2, 32M2,Distributed ECC Infrastructure 52, Navisphere, Connectrix Manager, Fabric Manager, Device Manager, Core-Edge SAN Fabric, IBM Blade Center with Linux, Solaris, Windows, Legato Networker, Veritas Volume Manager

Uniquify,Scott Blvd,Califirnia,CA Sep’2007-May’2008

Role : Physical Design Engineer

Responsibilities:

Intern

●Have worked on 65nm,90nm technology

●Laying floor plan, placement and routing of the given block using Magma Blastfusion.

●AS a POWER ANALYSIS ENGINEER I have to perform the power analysis on a routed database of a given block, and look into the areas where there is more power consumption and apply different power reduction techniques for over all low power consumption of the design.

●Wrote Prel, and Tcl scripts to automate the tools.

●A DSP block, an interface circuit for DSP and RAM and the control unit have been implemented in XILINX

●MATLAB was used to generate a noise signal and to analyze the output.

Contact this candidate