MATTHEW A. JAVADI, P.E.

**** *. *** ******* *** Norte Phone: 480-***-****

Scottsdale, AZ 85258 acs7yz@r.postjobfree.com Mobile: 480-***-****

SUMMARY

As the Department Manager and Chief Structural Engineer, I have over 30 years of experience in a variety of industrial projects. The industries I have been associated with include mining, semi-conductor, cement manufacturing, pulp and paper, commercial nuclear power, shipyard and marine, military and civilian facilities. My experience consists of over 10 years of managing the civil/structural department staff of engineers and designers, providing technical guidance on a variety of projects, developing scope of work, preparing design criteria and specifications, performing analysis and design for structures, and review and approval of design documents. I have extensive experience interfacing with the various engineering disciplines as well as coordinating the design activities of engineering and construction groups.

I am proficient in the use of analytical and design programs such as STAAD.Pro, PCA-MAT, PCA-COL and a variety of design software.

PROFESSIONAL EXPERIENCE

Stantec Consulting, Tempe AZ 2010 –September 2015

Chief Civil/Structural Engineer & Department Manager

As the Chief Civil/Structural Engineer and Department Manager, I supervised and coordinated the work of engineers and designers, prepared proposals, developed scope of work, and provided manpower and budgetary estimates. As the Engineer of Record, I prepared design criteria and specifications, performed analysis and design of steel and concrete structures with varying degrees of complexity, reviewed and approved design documents, offered technical guidance on a variety of projects.

Riotinto Oyutogoi Project, Mongolia

Responsibilities for this project involved participating on teams and leading a group of engineers and designers in the preparation of general arrangement for three color houses, coordination of the design of connections for steel framing members of the headframe, and design of 40 ton monorail for the clamping and lifting device (CLD).

PTFI DMLZ & GBC Project, Indonesia

Responsibilities for this project involved participating on teams and leading a group of engineers and designers in the preparation, design and approval of design documents for office buildings and workshops, inspection pit for locomotive, support structure for mechanical components, 20 ton and 40 ton bridge cranes, monorails and jib cranes, and concrete sump.

EuroChem VolgaKaliy Project, Russia

Responsibilities for this project involved coordination of the project design criteria with the Russian standards and client requirements, and analysis and design of steel structure at the bottom of the shaft for impact loads of the arrestor and ropeguides.

AMEC E&C SERVICES, INC., Phoenix, AZ 2004 -2009

Department Manager/Senior Structural Engineer

As the CSA department manager, I managed a staff of engineers and designers, participated in inter-discipline management and strategy meetings, prepared proposals and developed scope of work, and provided manpower and budgetary estimates. As the Engineer of Record, I prepared design criteria and specifications, reviewed and approved design documents, offered technical guidance on a variety of projects, supervised and coordinated the work of engineers and designers.

Mercator Minerals, Ltd, Mineral Park Process Plant, Kingman, Arizona

Responsibilities for this project as the engineer of record involved preparing design criteria and specifications for the copper moly flotation facility, MCC Buildings, thickener tanks and underground concrete vaults and access tunnels. In addition, I prepared calculations and reviewed/approved drawings for support structures, platforms, walkways and coordinated the structural design and modifications with the various engineering disciplines and offices.

Arizona Public Service Harquahala Junction - Sunvalley Project, Phoenix, Arizona

Responsibilities for this project involved preparing calculations and drawings for the concrete foundation of the 125 ft to 170 ft tall utility poles and lattice tower support structures for 500 KV transmission line.

Kennecott Utah Copper Mining Company, Salt Lake City, Utah

Responsibilities for the 2005 Moly Plant Expansion and 2007 Bulk Flotation Upgrade involved preparing design criteria and specifications, assessing the structural integrity of the existing building components for the additional loads from monorail extension, addition of storage tanks and mechanical equipment; preparing calculations and approving drawings for new platforms, walkways and equipment supports; coordinating the structural design and modifications with the various engineering disciplines.

SRP Navajo Generating Station Pumping Station, Page, Arizona

Responsibilities for this project involved performing structural analysis and design for a 20 foot diameter, 400 feet deep underground shaft and jacking chamber, and support structure for the drilling machine; coordinating, reviewing and approving design calculations and drawings by in-house designers and consulting engineers; preparing response to design review by an independent consultant.

Phelps Dodge, Morenci, Arizona

Responsibilities for this project involved developing and coordinating Civil/Structural/Architectural scope of work for pre-engineered buildings; performing structural analysis and design for multi story steel structures and concrete foundations; performing vibration analysis and design for a centrifuge support steel platform; designing overhead pipe and cable tray support trestles and foundations; designing support structures and foundations for MCC building, tanks and jib cranes; meeting with client to discuss design modification and monitoring progress of projects.

Newmont Gold Co., Battle Mountain Nevada

Responsibilities for this project involved developing scope of work, performing basic engineering and quantity takeoff, preparing calculations and drawings to obtain construction and environmental impact review permits, submitting petition to county government for permission to use a specific version of the design code, developing scope of work and soliciting bids for the relocation of the existing heavy equipment and mining truck repair facilities and administration building.

Phelps Dodge, Bagdad, Arizona

Responsibilities for this project involved developing scope of work, providing manpower and budget estimates, performing preliminary and final analysis and design for structural components, designing foundations for tanks and pumps, meeting with client to monitor the progress of projects.

JACOBS ENGINEERING GROUP, INC., Tempe, AZ 2000-2003

Department Manager/Senior Structural Engineer

As the department manager, I participated in the inter-discipline management and strategy meetings; developed scope of work and provided manpower and budgetary estimates in close cooperation with the project managers; met with clients to monitor the progress of projects; supervised the work of designers.

Army National Guard Maneuver and Training Equipment Site project, Ft. Irwin, California

Responsibilities for this project involved designing buildings, wash facilities for tanks and heavy support vehicles, covered parking for military and civilian vehicles; evaluating the site and buildings for anti-terrorism in compliance with the guidelines of the National Guard.

City of Phoenix Bus Rapid Transit project, Phoenix, Arizona

Responsibilities for this project involved designing and renovating various bus stations throughout the city of Phoenix.

Maricopa County Jail Expansion program, Phoenix, Arizona

Responsibilities for this project involved performing peer review for the seismic analysis and design of the Forensic Science Center and eight story parking structure.

Intel, FAB 11X Rio Rancho, New Mexico and FAB 20, Portland, Oregon

Responsibilities for this project involved seismic analysis and design of support buildings and structures supporting Mechanical/Electrical equipment; design and review of concrete caisson foundations and supports for process piping and HVAC ducts; analyzing and modifying the design of support structure for the raised ceiling and Automated Material Handling System (AMHS); assessing the integrity of the existing structural components for additional design loads; responding to RFIs and proposing design modifications in a timely manner.

Cypress Semiconductor, Bloomington, Minnesota

Responsibilities for this project involved assessing the structural integrity of the existing Fab 4 A/B facility to accommodate a new Implant Area; proposing design solutions to provide additional space over the existing make-up air units in the Sub-Fab level.

Motorola MOS 12, Tempe, Arizona

Responsibilities for this project involved assessing the structural integrity of the existing building for the additional weight of new air handling units; designing pipe and utility support trestle and foundations.

PAUL KOEHLER CONSULTING STRUCTURAL ENGINEERS, Scottsdale, AZ 1999-2000

Motorola MOS 12 Factory Expansion Project, Chandler, Arizona

Responsibilities for this project as a member of the core design team and resident structural engineer involved providing timely responses to engineering concerns and design change requests; assessing the structural integrity of the existing structures for design modification.

American Express Beardsley Campus, Phoenix, Arizona

Responsibilities for this project as a member of the project management team involved interfacing with architects, various engineering disciplines and the pre-cast construction company; analyzing the building structure for wind and seismic forces; designing retaining walls, shear walls and foundations; representing the structural group at the permit hearing with the City of Phoenix.

CONSULTING STRUCTURAL ENGINEER 1993-1999

BEHERNT ENGINEERING, Denver, CO

Responsibilities for this project involved analyzing and designing the Coal Grinding and Storage building, the Coal Mill pedestal, and mat foundation; designing support structures for the elevated 200 ton coal bins within and as an integral part of the building.

STONE & WEBSTER, Denver, CO

Department of Energy, Savannah River Project

Responsibilities for this project involved analyzing and evaluating the underground concrete Actinide Packaging and Storage Facilities for the effect of seismic and critical soil settlement; analyzing and evaluating concrete structures for the effect of tornado wind load and missile impact load.

CALENERGY, Salton Sea project

Responsibilities for this project involved analyzing and designing foundations for buildings and equipment.

REDPATH MCINTOSH ENGINEERING, Phoenix, AZ

Responsibilities for several projects involved analyzing and designing steel head frame, steel sets and steel structures at the loading pocket and dump chute; designing support steel girders for hoists and crane girders, steel platform to accommodate the concrete shaft lining refurbishment, concrete foundation for the hoists, reinforced concrete shaft collar and floors, timber structures in the shaft of underground gold mines.

SIMONS ENGINEERING (Mining Group), Phoenix, AZ

Safford Mining District Project, Safford, Arizona

Responsibilities for this project involved developing conceptual architectural and structural design for the administration building and various warehouses, explosives storage facilities, refueling stations and repair facilities for heavy mining equipment; refurbishing the existing buildings and performing preliminary design and quantity take-off for a 280 ft. overhead conveyor system and support structure; preparing reports and proposals for high volume industrial warehouse configuration and arrangement.

ARIZONA NUCLEAR POWER PROJECT, Phoenix, AZ

Responsibilities for this project involved analyzing and assessing the integrity of the structure and existing crane support structure; implementing the load monitoring system program.

WESTVACO PULP AND PAPER CO., Laurel, MD

Responsibilities for this project involved performing seismic analysis and design for steel structures and access platforms; designing reinforced concrete structures and refurbishing the existing structures.

BECHTEL POWER CORPORATION, San Francisco, CA 1986-1993

Washington Public Power Supply System, Richland, Washington

Responsibilities for this project involved preparing structural design requirement procedures for the effect of seismic and tornado on buildings in compliance with the Code of Federal Regulations for Nuclear Power Plants.

Arizona Nuclear Power Project, Phoenix, Arizona

Responsibilities for this project as the resident structural engineer involved coordinating the design modification activities of the plant operation, engineering and construction division; providing timely responses to engineering concerns and field change requests; assessing the integrity of the existing structures for bomb blast.

Public Service Electric & Gas, Salem, New Jersey

Responsibilities for this project involved re-evaluating and modifying the design of existing structures to accommodate the increase in design loads, cut reinforcing bars or heavy load drop; planning and designing radiation shield walls and access platforms; proposing and designing transportation devices and storage bins in compliance with the licensing requirements.

CONSULTING STRUCTURAL ENGINEER 1985-1986

Impell Corporation, Chicago, Illinois

Performed analysis for the proposed structural modifications by field engineers due to non-constructability and/or design change; prepared generic calculations for electrical conduit and pipe supports.

Sargent & Lundy, Chicago, Illinois

Performed structural analysis and design for the crane retrieving system and monorail crane supports; evaluated the proposed modifications by field engineers due to non-constructability and/or design change and proposed alternative designs for steel and concrete structures; designed pipe supports.

Century Engineering, Shipyard and Marine Division, Baltimore, MD 1983 – 1985

Trident Nuclear Submarine Repair Facilities, Kings Bay, Georgia

Responsibilities for this project involved reviewing and analyzing the design of dry dock entrance closure (floating caisson gate), dry dock cover and submarine guiding system in accordance with the NAVY specifications.

Ketchikan Vessel Maintenance Facilities, Ketchikan, Alaska

Responsibilities for this project involved designing the shipyard maintenance and support facilities, designing storage tanks, sand silos, pile supported foundations and crane girders; performing quantity take-off.

PROFESSIONAL REGISTRATION

State of Arizona, P.E. (32705)

State of Nevada, P.E. (016406)

State of New Mexico, P.E. (16529)

State of Utah, P.E. (564****-****)

State of Colorado, P.E. (PE-42956)

State of California, P.E. (Pending)

MEMBERSHIP

National Council of Examiners for Engineering and Surveying (NCEES)

Structural Engineering Association of Arizona

American Institute of Steel Construction (AISC)

American Society of Civil Engineers (ASCE)

American Concrete Institute (ACI)

International Code Council (ICC)

EDUCATION

Master of Science, Civil Engineering in Structures

The Catholic University of America

Bachelor of Science, Civil Engineering

The Catholic University of America

Contact this candidate