Maintenance Control

Adnan Liaqat

Sr. Instrument & Control Technician

Experience 07 years Mobile # UAE 009**-**-****-***

Marital status ; Married PAK 009*-***-**** 220

D.O.B 01/01/1989 Available in UAE on work visa Email: *************@*****.*** Skype ID Liaqatad

Nationality; Pakistani

Summary of Experience;

Seven(07) years Hand on experience as an Instrument Maintenance Technician in Repairing, Troubleshooting, Installation, Pre Commissioning,Commissioning.after commissioning,Function test, Loop Test Start-up and maintenance of different type of instrument Process Control systems mainly related to H2S,SO2,CH3, LNG,Helium,NGL,Ammonia,Urea,Granulation,Utilities and CO2 Recovery Units. Also responsible for calibration and maintenance of Gas Metering system and Pressure Regulating Skid. I am also familiar with functioning and Maintenance of all type of toxic Gas Detectors, Sensors and F&G system including Inergen system.

Good knowledge of SAP and Maximo (CMMS -Maximo 6.2.)Maintenance management system.

Having detailed knowledge of Field and Control Room Instrumentation & Control System Maintenance. Preventive, Corrective & Predictive Maintenance. Experience Maintenances, various types Field & Control Room Instrument Control System.

Attached with DCS, PLC .Captivities all type of instruments Pressure, Flow, Level, Temp, Vibration, Speed, Analyzers Steam & Water, Oil, Gas, CEMS, and SWAS. Etc. Installation & Calibration of Different Type of Control Valve. Installation & Calibration of flow meters, Transmitters, of Siemens, ABB, Yokogawa, Fisher and Rosemount.

Working on Different DCS:

1.Siemens Boiler & Steam Turbine DCS SPPA- T2000 (TELEPERM XP)

2.Mitsubishi Boiler & Steam Turbine Diasys Netmation DCS

3.Honeywell TDC3000 and Enfy90 (Honeywell).

4.Honeywell Enfy Experio R-3103

5.ABB August.

6.ICS Triplex

Working on Different PLC:

1.Allen Bradley Control RS Logix 5000 PLC

2.PLC Allen Bradley SLC 500

3.PLC Siemens Sematic S7

PROFESSIONAL EXPERIENCE:

1.Abu Dhabi Gas Industries Ltd.(GASCO) Habshan & BAB Plant Division

Designation; Instrument & Control Technician

Duration; 07 Feb 2015 to Date

Responsibilities; Working as an Sr. Instrument & Control Technician. My Job scope includes working with various Instruments, all of which require the ability to read & understanding engineering drawings such as P & IDs, loop drawing, ladder logic and block & functional diagrams.

• Experienced to remove, dismantle, overhaul/repair and install electric, pneumatic, electronic or hydraulic control system such as control valves and actuators, recorders, measuring and recording instruments.

•Attend day by activities such as PM jobs, Breakdown jobs and troubleshooting jobs.

•Hand on experience for troubleshooting, Maintenance and calibration of pneumatic, HART/Smart protocol instruments of Rosemount 275,375,475, Honeywell SFC300, and Yokogawa BT-100/200. Multicalibrator – MLC – by ammeter, Pressure calibrator by Druck & Fluke instrument. MA and % calibrator by Ammeter, Temperature calibrator by Ammeter. Dead weight tester. Multi calibrator by Fluke. Endress + Hauser, Siemens and Fisher.

•Hand on experience for checking and calibration/proving of Ultrasonic and Orifice based Gas metering system.

2.Al Hosn Gas, Shah Project At Abu Dhabi

Contract with Eni Saipem UAE.

Designation; Sr. Instrument & Control Technician

Duration; 10 March 2014 to 02 Feb 2015

1.Responsibilities; I am Familiar of Field and Control Room Instrumentation & Control System Maintenance. Preventive, Corrective & Predictive Maintenance. Experience Maintenances, various type Field & Control Room Instrument Control System. i Worked on Pre Commissioning, Commissioning. after commissioning Activities, and also Function test, Loop Test Start-up of plant and maintenance of different type of instrument Process Different types of Gas Detectors, like H2S,Mathane,Carbon Mono Oxide etc. and also working on DCS Honeywell Enfy Experio R-3103 And PLC etc.

2.Company Business; Shah Gas Development (SGD) Project,its Located at 180km South west of Abu Dhabi. Sales gas of 580 MMSCFD.NGL of 28,000 Bpd,

Liquid Sulpher of 9200 Tpd. condensate to 50,000.

3.Company: NOMAC – First National Operation & Maint. Co. Ltd., Jeddah – KSA

(A 100% own subsidiary of Acwa Power International).

Designation: Instrument & Control Technician

Duration: From June 2013 to Feb.2014.

Company Business: ACWA Power International (ACWA Power) is a developer, investor, co-owner and operator of plants with a contracted production capacity of 13,000 MW of power and 2.37 million m3/day of desalinated water plants in KSA.

Responsibilities:

Field and Control Room Instrumentation & Control System Maintenance. Preventive, Corrective & Predictive Maintenance. / Experience Maintenances, various type Field & Control Room Instrument Control System. Attach with DCS, PLC .Captivities all type of instruments Pressure, Flow, Level, Temp, Vibration, Speed, Analyzers Steam & Water,Oil, Gas,CEMS, SWAS. etc, Shut off Valves,Control Valves, Thermocouple, RTD, Transmitters, Switches etc. Calibration, Maintenance. Troubleshooting.

Experience on Analyzers on line & Labs:

PH Analyzer, Conductivity Analyzer, Oxygen Analyzer, CEMS, Co2, Nox Analyzers.

On line Gas Chromatograph. Oil Testing Analyzer Spectroil, Sensing oil in water Analyzer. Sodium Analyzer. DO Analyzer. Silica Analyzer on line & Labs etc.

SIMATIC Field PG to the bus system And Omron PLC 3G 2CS.And Also Working on Different types of Gas Detectors,H2S,Mathane,Carbon Mono Oxcide etc.

Calibration & Maintenance Different INSTRUMENTS:

1.Vibration Control System MMS Bently Nevda 3500.

2.Vibro Meter VM 600 System Siemens.

3.Mini Max Fire System in Steam Turbine Siemens.

4.ONYX Series Fire System for Honeywell

5.Gas &Fire System Integration ALLESTIC 800 in Single Enclosure.

6.Digital Generator Protection system M-3425.

7.Worked on Electro pneumatic Actuators through DCS.

8.Installation & Calibration of Different Type of Control Valve.

9.Installation and calibration of ultra-sonic, Radar and Probe type, Tuning fork and Capacitance type level sensors & Transmitter. Installation & Calibration of Different Type of Control Valve.

10.Installation & Calibration of flow meters, Transmitters, of Siemens, ABB, Yokogawa, Fisher and Rosemount.

11.Installation and calibration of ultra-sonic, Radar and Probe type, Tuning fork and

12.Installation and calibration of Pressure Gauges, Temperature switches, Pressure switches, Temperature indicators, thermocouples, RTD.

13.Perform corrective & preventive maintenance of all running Instruments of Power Generation unit & Water treatment project.

ANALYZER (AT):

Calibration, Repairing, Troubleshooting and Preventive Maintenance Program of different types of Analyzer.

1.PH/ORP Analyzer Model- EXA PH 400G (YOKOGAWA)

2. Conductivity Analyzer Model- EXA SC 100 (YOKOGAWA)

3. O2 (Oxygen Analyzer) Model- ZR402G Zirconia Oxygen Analyzer(YOKOGAWA)

4. DO(Dissolved Oxygen) For ABB Model-9438&9408

5. CEMS (Continuous Emission Monitoring System) NOX, SO2.CO2,CO,O2 Analyzer ENDA- 5000 (HORIBA)

6. Stack Dust Analyzer D-R 820 F(HORIBA)

7. SIO2 (Silica Analyzer) Model-AW641/54000010 For ABB Navigator 600, And Hack Silica Analyzer Model-5000 Series

8.CL2 (Residual Chlorine Monitor) RC-10C Made-KRK Japan

OFF Shore Fuel Unloading Jetty:

Troubleshooting and Maintenance on Jetty Instrument and Control System

1.Arabian Heavy Crude (AHC) Capacity 100,000 DWT in 24 hours

2.Heavy Fuel Oil (HFO) Capacity 20,000 DWT in 24 hours

3.Fault Finding and repairing of different type of Temperature Controller Yamatak and Honeywell.

Testing Equipment:

I worked to repair different types of testing equipments which are listed below:

1.Digital RPM counter, Frequency counter, digital thermometer and moisture check tension meter.

2.Quality Control equipment / machines

3.Statimat - M and Statimat -2 (German) Thread Long ness and tension testing machines

4. Company: SABA Power Plant - Pakistan

Designation: Instrument & Control Technician

Duration: 2009 to 2013

Company Business: The Company owns a power generation facility("Complex") in District Sheikhupura, Province of Punjab, Pakistan. The Plant configuration is single RFO fired high efficiency boiler with a steam capacity of approximately 900,000 lb/hr, feeding a single re-heat steam turbine generator set rated for a maximum gross generation capacity of 134 MW.

Responsibilities:

Trouble shooting of routine problems of major equipment’s as well as BOP’s including DCS logic on boiler and steam turbine.

Corrective Maintenance.

Preventative Maintenance.

Annual Shutdown activities

SAFETY CONSCIOUS:

Handsome safety awareness against personal safety as well as plant related safety. Maintain very safe working environment through the international standards. Well known about work permit procedure, Fire Fighting, emergency First Aid, Chemicals Handling, Self Contained Breathing Apparatus, Safe Work at Height, Confined space etc .

Technical Qualifications:

3-Years Diploma of Associate Engineer (D.A.E) in Electronics Technology in 1st Division from Swedish institute of Technology Gujranwala, Punjab Board of Technology Lahore.

Three months Computer Operating Course from Boston College, Pakistan.

Matriculation In Science .

Contact this candidate