Craig Bilenki

**** ***** **

Baltimore, Maryland 21225

443-***-****

acrvr2@r.postjobfree.com

Objective

Position as a mechanical designer in a progressive engineering environment which will demand the use of my talent and experience while stimulating me to learn and use my creativity to find solutions to new challenges.

Work Experience

Senior Mechanical Designer

6/2010 – 8/2015 Oceaneering International Inc. Hanover, MD

Using Solidworks (2010 - 2014), and Autocad (2010 - 2014). Responsible for the design of electro-mechanical systems for the Entertainment Industry (Universal Studios, Disney, SeaWorld). Created documentation to include parts, assemblies, drawings and photoview renderings.

Cad Manager, Mechanical Designer, Marketing Services

2/2008 – 5/2010 Premier Rides Inc. Baltimore, MD

Using Solidworks (2007 - 2010), and Autocad (2007 - 2011). Responsible for the design of mechanical systems for the Roller Coaster and Entertainment Industry. Created and managed documentation to include part drawings; detailed assembly drawings, animations and photoview renderings. Worked on several marketing proposals incorporating Solidworks renderings, animations and Photoshop. Created scaled roller coaster models for trade show presentations.

Cad Administrator: Implementing latest version of cad software; Creating part, assembly, and drawing templates with current proprietary info; Setup and implemented documentation control procedures and engineering change orders. Creating standard parts library, configuration management, and drawing standard compliance.

Advanced Designer (Elecro-Mechanical), Cad Administrator

1/2005 – 2/2008 L3 Communications: Applied Signal & Image Technology Inc, Linthicum, MD

Using Solidworks (2005 - 2008), and Autocad (2005 - 2007).Responsible for the design of electro-mechanical systems and equipment from initial concept through completion of all phases of engineering documentation. Created and managed complete documentation to include, assembly drawings; detailed dimensioned drawings and 2d drawings of interconnect diagrams & cables.

Cad Administrator: Implementing latest version of cad software; Creating part, assembly, and drawing templates with current proprietary info; Creating standard parts library, configuration management, and drawing standard compliance.

Mechanical Designer/Drafter

2/2004 - 12/2004 Synthes USA, West Chester, PA

Responsible for the documentation of medical instruments and tools used for the production and development of prosthetics. Created drafting/design standards. Used Pro/ENGINEER (Wildfire) and PTC Medusa 2D cad systems

Mechanical AerospaceDesigner

9/2002 - 2/2004 Johns Hopkins Applied Physics Laboratory, Laurel, MD

A member of the Technical Services Mechanical group.Responsible for documentation and design of the Primary and Seconday structure for the STEREO spacecraft. Using Pro/ENGINEER (rev. 2000i2- 2001) and Solidworks (rev 2003), solid modeling in an Intralink environment and Implemented DCN changes

Mechanical Design Specialist

6/2000 - 9/2002 Corvis Corporation, Columbia, MD

Designed and packaged mechanical/electrical/optical assemblies and modules for leading edge fiber optic telecommunications company. Using Pro/ENGINEER (rev. 20-2000i2), Solidworks (rev 2001), developed new mechanical and optical components. Responsible for creating PCB layouts, SLA models and mock-ups, design feasibility studies and engineering presentations. As Lead Designer for OBT and Protection Selection Modules (PSM), conducted periodic design reviews, generated progress reports, kept complete and organized documentation, and coordinated efforts of mechanical, optical, and electrical engineers on those projects. Implemented ECN changes and assisted in the generation and implementation of company-wide modeling standards. Performed site visits to assess vendor competence and quality systems.

Mechanical Designer

12/1995 - 6/2000 Novatec Incorporated, Baltimore, MD

Designed and detailed heavy industrial equipment, material handling and vacuum conveying systems and plant layout and piping schematics for the processing of plastics. Using Pro/ENGINEER (rev. 16-20) on Unix workstations modeled and developed new equipment for blending, weighing, and drying raw plastics. Using PTC Medusa 2D cad system completed electrical schematics, flow diagrams, and sales presentation materials. Created and maintained equipment and symbol library for CAD department. Completed ECN changes to legacy engineering drawings.

Draftsman

2/1987 - 6/1998 Riggs Distiller Company, Sparrows Point, MD

Board drafting (ink on vellum) of plant layouts and piping schematics for water sprinkler/waste management handling firm

Designer/CAD Administrator

6/1995 - 12/1995 Tate Andale, Inc, Elkridge, MD

Assisted in the design of water filtration systems for military vessels using AutoCAD rev. 13. Responsible for set-up, installation, and maintenance of AutoCAD software. Performed help desk and data librarian duties (file backup, storage, etc.)

Designer/Draftsman

1/1995 - 6/1995 Kirshner Medical, Timonium, MD

Using SDRC/Ideas Master Series and AutoCAD rev. 12 assisted in development of prosthetic hip & joint replacements. Modeled/detailed custom medical instruments and tools used in joint replacement surgery. Conceptualized and designed impact-resistant stainless steel cases for sterilized medical equipment.

Designer/CAD Administrator & Supervisor

12/1993 - 1/1995 Associated Pipe Designers, Baltimore, MD

Created isometric piping schematics of chemical handling and disposal lines using AutoCAD rev. 11/12. Installed and supervised first computer-aided design department (including purchase and installation of all hardware/PC’s).

Electrical Draftsman, Engineering Assistant

1/1992 - 12/1993 Ambec Incorporated, Owings Mills, MD

Utilized AutoCAD rev. 11 on PC platform to detail electrical schematics and control panels for industrial conveyor systems. Various engineering assistance tasks including: PLC programming, file/data backup, maintenance of ECO database (Lotus 1,2,3)

Chief Drafter, CAD Administrator/Manager

11/1990 - 1/1992 Stevens Painton Company, Sparrows Point, MD

Used AutoCAD rev. 10/11 (with AME) in design of piping layouts for filtration and management of hazardous chemicals. Set-up and maintained PC’s for engineering department (installed software, managed printers, etc), handled manpower control, daily & weekly time sheets, and all engineering changes (ECNs).

Education

10/2001 Solid Works Training, Laurel, Md

Certification

Solid Works Certificate for (Solid Works Essentials)

CSWP

7/1999 Formal Pro/Engineer Training, Baltimore, Md

Certification

Pro/BASIC (rev. 16), Update Training (rev. 20), Advanced Part/Advanced Assembly, Pro/SHEETMETAL, Pro/DETAIL, Pro/CABLE, INTRALINK

7/1994 Catonsville Community College, Catonsville, Md

Some College Coursework Completed

Intensive Design/Drafting Studies, Formal AutoCAD Training including: Basic & Advanced AutoCAD (through rev. 12), AutoCAD AME (3D Modeling Extension)

6/1988 Brooklyn Park High School, Brooklyn Park, Md

High School or equivalent

General studies with heavy focus on pre-Engineering topics. Relevant courses include: Drafting I, II, III, and CAD Training (Autocad LITE – precursor to AutoCAD)

Skills

Skill Name Skill Level Last Used/Experience

AutoCAD Intermediate Currently used/20

Generic CAD Intermediate +4 years ago/2

Medusa (2d) Expert +4 years ago/7

Microsoft Office Suite Intermediate Currently used/5

Microstation Beginner +4 years ago/1

Pro Engineer Expert +4 years ago/18

SDRC/Ideas Master Series Beginner +4 years ago/1

Solidworks Expert Currently used/10

UNIX Intermediate +4 years ago/5

Photoshop Elements Beginner Currently used/1

References

All references provided upon request

Additional Info

Active Top Secret Clearance

Over 20 years of electro-mechanical design/drafting experience. Proficient in SolidWorks & Pro/ENGINEER through Wildfire 1.0 (15 yrs. exp.), special emphasis on large, intricate assemblies and sheet metal components. Employment experience in multiple industries including: fiber optic, medical, heavy industrial, plastics, military, chemical, and sheet metal. Over 5 years of system administration and maintenance experience (various CAD systems on various hardware platforms)

I am the President of the Baltimore SolidWorks User Group. (B-MORESWUG)

I am an CSWP!

Contact this candidate