Engineer Design

TYSON W.JOHNSON

#****-**** * *** ** Calgary AB T*P 5N6 403-***-**** ****************@*****.**

SENIOR CIVIL & STRUCTURAL ENGINEER

Accomplished and solutions-driven Senior Civil & Structural Engineer with over 20 years of experience in the Oil & Gas and Pulp & Paper industries. Offering robust analytical, design, and organizational skills coupled with a strong technical and methodical aptitude. Proven history of overseeing all aspects of project development, from preliminary design through to review and completion.

Effective communicator who quickly earns the trust, confidence, and respect from clients, colleagues, external partners, and key stakeholders from diverse cultures and professional backgrounds. Hands-on leader who motivates others to meet budgets and schedules while maintaining safe working practices. Maintains a high standard of professionalism and flexibility while facing stressful situations in fast-paced environments.

KEY STRENGTHS & SKILLS

Engineering Design & Review

Strategic Planning & Execution

Troubleshooting & Resolution

Professional Collaboration

Regulatory Compliance

Project Management

Reporting & Documentation

Leadership & Team Building

Client & Vendor Relations

Technical Skills: S-Frame DYNA 5 Risa-3D Risa Sections STAAD Pro Release 3.0 MS Office Suite

PROFESSIONAL EXPERIENCE

Senior Structural Engineer- Gekko Engineering INC –Carson, California Aug 2015 to Sept 2015

Plenum Project: Model Plenum Structure on STAAD for Crane lifting Schemes

HRC Plenum: Project:

Plenum structure is curve steel plate structure 10 feet X 80 feet in plan by 32 feet weighing approximately weighing 100 tones. The Primary assignment was to model the plenum structure in structural analysis computer program (STAAD) to check for over stresses in the plenum structure for two plenum-lifting schemes. The first lifting scheme was the plenum structure-vertical. The second lifting scheme was to lift the plenum structure when placed in horizontal position supported on timber cribbing. If over stresses were found in plenum structure under both lifting schemes, then the assignment was to design temporary reinforcement to reduce the overstress to within acceptable code limits and to design temporary bracing to stabilize the plenum structure if required. The design of the plenum lifting lugs was included in the plenum project scope of work.

Senior Structural Engineer WALDMAR S. Nelson And Co. – New Orleans, La Feb 2015 to April 2015

Shell Carman Creek Project

Project assignments include the design of the Oil Treatment Building pipe rack modules and the Inlet Preparation platforms.

Review the design and in put Risa North South pipe rack models.

Senior Structural Engineer AMEC – Fort McMurray, AB June 2012 to Aug 2014

Imperial Oil Kearl Oil Sands Mine Project:

Acted as the Structural Lead and supervised 3 Engineers and 2 Designers on a daily basis

Investigated and resolved any structural issues in an accurate and timely manner

Reviewed contactor RFIs (request for information), NCRs (non- conformance) and SDRs (spec deviations)

Other assignments involvement in the modifications and construction of some of the access roads to the plant mine site. I was also involved in the design drainage ditches and culverts.

Senior Structural Engineer AMEC – Calgary, AB April 2010 to June 2012

Oversaw 2 Engineers and a Designer in the additions and modifications to pipe racks

Designed Steel reinforcement for pipe racks for the additional pipe transient stress pipe anchor loads by adding horizontal bracing revising the connection forces

Reviewed Hillsdale pipe rack connections and shop drawings

Senior Structural Engineer AMEC – St. Louis, MS Jan 2010 to April 2010

Reviewed Hillsdale Fabricators connection calculations and shop drawings of Froth main and finger pipe racks on first phase of the Kearl project using Canadian and American steel codes

TYSON W.JOHNSON

#1904-1068 6 Ave SW Calgary AB T2P 5N6 403-***-**** ****************@*****.**

PROFESSIONAL EXPERIENCE CONT’D

Lead Civil Structural Engineer CH2M HILL – Calgary, AB May 2008 to Dec 2009

BP Noel Project:

Reviewed the design of the main pipe rack steel, pile foundations for Node 2 Compressor Gas Plant, chemical inhibitor tank roof, and pipe supports for numerous gas well sites

Designed the pipe supports and piling foundations for equipment skids on PB Noel well sites

Provided a DYNA 5 design check on compressor pile foundation, ensuring that the compressor frequency did not coincide with the natural frequency of the compressor foundation.

Petro Canada Project:

Supervised 2 Design Engineers in the design of the Waste Water Treatment area including the Waste Water Treatment building, pipe racks, stair towers, and 2 equalization tank foundations

Designed the building’s structural slab with MBR Aerobic, MBR filter, utility, Sludge, and Ras Was Tanks

Senior Civil Structural Engineer AMEC – Calgary, AB Sept 2007 to May 2008

Canadian Natural Resources Limited (CNRL) Phase 1 Project:

Designed an extension to the existing PSC Underflow pump house required to house 2 power packs in a temperature control environment

Inspected PSC underflow pump house steel module structure which house a 3000 Hp pump

Provided a DYNA 5 design check on pump and pump motor frequencies

Senior Civil & Structural Engineer Fluor – Calgary, AB Sept 2006 to Sept 2007

Sipchem Project in Saudi Arabia:

Designed multi-storey equipment support structure which was 42-meter long, 33-meter tall, and consisting of 8 floors of which the majority supported exchangers and vessels

Designed the steel members, all the steel beams, and horizontal and vertical bracing connections were designed to aid the fabricator in detailing of the connections

Senior Civil & Structural Engineer AMEC – Calgary, AB March 2006 to Sept 2006

Shell Optimization Project:

Performed the preliminary design of a 57-meter wide, 107-meter and 37-meter high Extraction building containing 6 interior box truss columns and three 20-tonne and one 15-tonne cranes

Resisted the crane lateral and wind loads by introducing full length and full width horizontal roof trusses and vertical bracing in the 4 perimeter building walls

Senior Civil & Structural Engineer IMV Projects – Calgary, AB May 2005 to March 2006

Encana Foster Creek Project:

Designed a 15 meter long trunk line bridge and design check of pipe supports for the trunk line on

Reinforce existing 1151-1152 pipe racks for the 20 inch steam Tie-in

Senior Civil & Structural Engineer Vista Projects – Calgary, AB Feb 2004 to May 2005

Reinforce existing 254, 951 to 955 and 1151 to 1152 pipe racks for a 20 inch steam line including strengthening existing pipe rack beams, columns and beam column connections

TYSON W. JOHNSON

#1904-1068 6 Ave SW Calgary AB T2P 5N6 403-***-**** ****************@*****.**

PROFESSIONAL EXPERIENCE CONT’D

Senior Civil & Structural Engineer Tri Ocean Natchiq – Calgary, AB Jan 2003 to Feb 2004

Caroline Central & Waterton Reconfiguration Projects:

Designed new pipe supports and modifications to existing pipe rack

Led the engineering design study of Petro-Canada RCP1 Hydrogen Plant to provide steel and concrete quantities for the capital cost estimate

Senior Civil & Structural Engineer AMEC – Calgary, AB March 2000 to Jan 2003

Foster Creek (Encana) Project:

Strengthened existing east-west 953 – 969 and north-south 251 – 254, B205, 351 – 354 pipe racks by designing additional vertical bracing for east – west and north-South pipe racks

Retrofitted modifications to the existing pipe racks include the installation of expansion joints between pipe rack modules and the installation of horizontal bracing to reinforce the existing transverse beams

Aurora Train 2 – Extraction Project:

Reviewed the design of pile foundations for pipe rack modules one to seven, peb electrical building, flotation cell, and feed line support structure

Provided a DYNA 5 design check on the Deaerator Pump foundations

PAN Canadian – Christina Lake Project:

Designed 4 steel modules to support Shell/Tube Heat Exchangers

Shell Muskeg River Oil Sands Project:

Designed the structural steel for the Tailings Pumphouse Building Shell with a 20-tonne bridge crane traveling full length of the building

Resisted gravity and external wind loads by introducing vertical roof truss moment connected to the building columns with full depth horizontal roof truss with vertical bracing only in the perimeter bay lines

Reviewed the design of the operating floor steel of the Flotation Cell building with a 15-tonne bridge crane

Conda Project:

Reviewed the design of pipe rack structures and a concrete raft using STAAD Finite Element program

PREVIOUS EXPERIENCE

Senior Structural Design Engineer Bantrel – Calgary, AB 1998 to 2000

Design/Heavy Lift Engineer Industrial Service Corporation – New Westminster, BC 1997 to 1998

Senior Project Manager Anderson Bjorstad Kane Jacobs Inc. – Seattle, WA 1997 to 1997

Senior Structural Design Engineer Csfm Engineering Ltd. – Vancouver, BC 1996 to 1996

Senior Structural Engineer Columbia Engineering Ltd. – Vancouver, BC 1995 to 1996

Senior Field Engineer Colony Management Ltd. – White Rock, BC 1994 to 1995

Senior Structural Design Engineer Jgs Consultants Ltd. – Delta, BC 1993 to 1994

Senior Structural Design Engineer Woodpro Engineering Ltd. – Prince George, BC 1992 to 1993

Intermediate Structural Engineer H.A. Simons (Internationa) Ltd. – Vancouver, BC 1987 to 1992

Structural Design Engineer Gcg Dillon Consulting Limited – Edmonton, AB 1986 to 1987

EDUCATION & MEMBERSHIPS

Bachelor of Civil Engineering University of Ottawa – Ottawa, ON

Registered Professional Engineer Alberta, British Columbia & Ontario

Contact this candidate