Engineering Engineer

RESUME

SRIKANTH G

Email Id : ********.*****@*****.***

Mobile No: +91-955*******

CAREER OBJECTIVE:

Keen to be associated with a progressive organization that gives me challenges and opportunities to hone my skills in accordance with the latest trends while working dynamically towards growth of the organization.

WORK EXPERIENCE:

Worked as Assistant Professor in Stanley College of Engineering and Technology for Women, Hyderabad from December, 2014 to April, 2015.

Worked as Teaching Assistant in Stanley College of Engineering and Technology for Women, Hyderabad from July, 2011 to November, 2012.

Worked as GIS Engineer at Trigeo Technologies Pvt. Ltd, Hyderabad from January, 2011 to July, 2011.

Worked as Graduate Apprentice Trainee at Hindustan Aeronautics Limited, Hyderabad from 8th September, 2008 to 7th September, 2009.

Roles and Responsibilities

Delivered the lectures for under graduate students in the subjects Analog Communications, Digital Signal Processing, Signals & Systems, Basic Electronics.

Published a paper titled Design of High Speed Low power Reversible Vedic Multiplier and Reversible Divider in International Journal of Engineering Research and Applications (ISSN: 2248-9622).

Coordinated student workshops such as CISCO Networking, PCB circuit making & Design conducted by IIT Delhi.

Participated in different Faculty Development Programmes.

Participated as expert resource person in the faculty workshop “MATLAB-Engineering Applications”.

Handled laboratory practical classes for under graduate students in the courses such as Communications, Electronics, VLSI, Embedded systems.

Worked on tool called Map Window for collecting the data from satellites and digitizing them in a proper format as a GIS Engineer.

Worked on voice operated switch project at HAL as a apprentice trainee.

EDUCATIONAL QUALIFICATIONS:

COURSE

INSTITUTION

UNIVERSITY

/BOARD

YEAR OF PASSING

AGGREGATE

M. Tech

(VLSI SD)

Indur Institute of Engineering and Technology

Jawaharlal Nehru Technology University,

Hyderabad, Telangana

2014

72.25 %

B. Tech

(Electronics and Communication Engineering)

Swami Vivekananda Institute of Technology

Jawaharlal Nehru Technology University,

Hyderabad, Telangana

2008

70.66%

Intermediate

Narayana Junior College

Board of Intermediate Education, Telangana

2004

87.00%

SSC

Jyothi Bala Mandir High school

State Board of Secondary Education, Telangana

2002

82.00%

TECHNICAL QUALIFICATION:

Obtained Advanced Diploma in Industrial Automation (ADIA) from Technocrat Automation Pvt Limited (IAO Accredited) Chennai, with five months hands on practical experience in Industrial Automation Tools specializing in PLC, DCS, SCADA and VFD.

Obtained GSM RF Engineer Trainee certification from BSNL RTTC, Hyderabad, with three months hands on practical experience in RF surveying, installing, operation and maintenance of BTS.

TECHNICAL SKILLS:

PLC (Programmable Logic Controllers) & DCS (Distributed Control System) - Programming languages such as LD (Ladder Diagram) & FBD (Functional Block Diagram) exposure in brands as Siemens, Keyence, OMRON, AB (Allen Bradley), ABB (Asea Brown Boveri), Honeywell.

Hands on Practical exposure in GE-Fanuc, Keyence, Omron, Mitsubishi, Delta.

SCADA (Supervisory Control & Data Acquisition) – Screen designing, PLC interface, Data collection & storage

HMI (Human Machine Interface) - Screen designing, PLC interface, DCS interface

PAC (Programmable Automation Controller) – X, Y axis Robotic Control using Servo motors & drives

VFD (Variable Frequency Drive) – Commissioning and Troubleshooting

Pneumatics & Field Instruments ( Control Valve, Sensors, Level Transmitters, Flow Transmitters, Temperature Transmitters, Pressure Switches)

Interfacing between PLC & GSM modem to communicate with mobile device

Knowledge in Panel wiring

Knowledge in PID (Proportional Integral Derivative)

Troubleshooting – PLC & DCS programming

- Control Panel (Power wiring & Control wiring)

ACADEMIC PROJECT:

Main Project:

Project Title: Design of High Speed Low Power Reversible Vedic Multiplier and Reversible Divider.

Description: This project deals with designing of 32x32 bit multiplier using vedic maths algorithm and reversible logic gates and also designing of divider using reversible logic gates. Out of sixteen sutras in vedic maths, third sutra called Urdhva Thiryakabhayam is used here which gives the output in 2n-1 steps where ‘n’ is the no. of bits. Also in reversible logic gates there will be no power loss hence it is called as high speed low power multiplier. Simulation and synthesis has been done in Xilinx ISE version 9.0 to generate netlist.

ACHIEVEMENTS:

Coordinated for the workshop IBNC-2015 on CISCO networking organized by IIT Delhi conducted on February 6th & 7th, 2015 at Stanley college of Engineering & Technology for women, Hyderabad.

Participated in the workshop on ‘Alternate Energy Sources’ conducted on 3rd January, 2015 organized by Electrical & Electronics Department at Stanley College of Engineering & Technology for women, Hyderabad.

Delivered a lecture on ‘Solution of second order differential equations using MATLAB’ on 11th December, 2014 at R & D cell of Stanley College of Engineering & Technology for Women, Hyderabad.

Participated in Faculty Development Programme on ‘Innovations in Research Methodologies’ organized by the departments of Information Technology & Computer Science Engineering conducted on 3rd & 4th December 2014 at Stanley College of Engineering & Technology for women, Hyderabad.

Participated as expert resource person in the workshop MATLAB ENGINEERING APPLICATIONS conducted on December 1st & 2nd, 2014 at Stanley college of Engineering & Technology for Women, Hyderabad.

Published a paper titled DESIGN OF HIGH SPEED LOW POWER REVERSIBLE VEDIC MULTIPLIER & REVERSIBLE DIVIDER in International Journal of Engineering Research and Applications(ISSN : 2248-9622)

Participated in three day workshop on ‘ NAAC & NBA Process’ conducted on 5th, 6th & 7th May, 2014 at Indur Institute of Engineering & Technology, Siddipet.

Participated in Faculty Development Programme on ‘Innovative Teaching Methodology’ organized by the department of Business Management conducted on 4th December, 2013 at Stanley College of Engineering & Technology for women, Hyderabad.

Coordinated for ‘PCB making and Circuit Design’ student workshop conducted on 14th and 15th September, 2013 at Stanley College of Engineering & Technology for women, Hyderabad.

Certified in SIEMENS (S7-300/400) PROGRAMMING AND APPLICATIONS from Advanced Training Institute For Electronics And Process Instrumentation, Ramanthapur, Hyderabad.

Technical Paper Presented on CMOS Lithography at National Level Technical Symposium held in Malla Reddy College of Engineering and Technology, Hyderabad.

INDUSTRIAL VISIT:

Visited Carborundum Universal Limited(CUMI)company, Sri Perumbudur, Tamilnadu in August, 2015 and observed that how Roll Slitting, Discs, Sheets are manufactured automatically using unwinding coated Abrasive jumbo material with the help of PLC’s.

COMPUTER SKILLS

Languages : C and Data Structures, Verilog, MATLAB

Packages : M.S office

Designing Tools : PLC, SCADA, Mentor Graphics

Operating Systems : Windows XP/7/8

PERSONAL PROFILE:

Father’s Name : Mr. Srikanth G

Gender : Male

Date of Birth : 14th November, 1986

Languages Known : English, Telugu and Hindi

Hobbies : Playing Carroms, Chess and Cooking.

Passport Number : H0384636, Valid till AUG 2018.

Address : Plot No:57, H No:1-9-485/13-5, Near Lalitha

Nagar Community Hall, Lalitha Nagar, Adikmet,

Hyderbad-500044, Telangana, India.

DECLARATION:

I hereby declare that the above particulars furnished by me are true to the best of my knowledge and belief.

Date:

Place: SRIKANTH G

Contact this candidate