Piping Engineer

Roderick Landicho Medrano

**** ******** ********, ****** ********* Residences

Delas Alas Street, Sta. Ana Manila, Philippines

Mobile No.: +639*********

E-mail: ****************@*****.***

JOB TITLE

PDS/PDMS – Senior Piping Designer

SUMMARY OF EXPERIENCE

More than 12 years of experienced in Oil and Gas Fields, Chemical, and in Shipbuilding.

10 years of experienced in Oil and Gas Fields, Chemical Plant, Low Pressure tanks such as LNG tanks, Cement Plants, Power Plants and Desalination Plant.

2 years of experienced in Shipbuilding such as construction of Accommodation Barge and Elevated Support Vessel.

Intensive knowledge in FEED phased to Detail Design stage in Oil/Gas and Chemical Plant.

Checked Isometrics drawings produced by Piping Designers.

Intensive experienced in preparing Tie-in List, Line List and Isometric tracking.

Performed 3D Model of Piping Layout based on P&ID, Equipment Layout and other related documents using PDS or PDMS.

Experienced in preparing Equipment Layout for FEED and Detailed Design stage.

Experienced in preparing quotation for valves, pipes, fittings, and other specialty item for the construction of Elevated Accommodation barges.

Site experienced in supervising Piping installation, ensuring that all piping was installed as per drawing and standards.

Able to coordinate professionally to other disciplines.

WORK EXPERIENCE

FLUOR DANIEL INC., PHILIPPINES, THRU (COLLABERA SOLUTIONS PTE. LTD.,)

Fluor Corporation is one of the world's leading publicly traded engineering, procurement, construction, maintenance, and project management companies. Fluor Daniel Inc. – Philippines (Fluor Philippines) has been in operation since 1987. The office’s first project was engineering for a Client in China. Fluor Philippines now offers full-service EPC services to Clients locally and around the world.

SENIOR PIPING DESIGNER

Fluor Daniel Inc., (Philippines), Feb. 02 2015 to April 30 2015

Project:

Lemongrass Project – The main product of this plant is Citral which is identical to a main component found in lemongrass and other essential oils. Besides being used in fragrances and flavors for its fresh-citrus, Citral is also a precursor for other aroma ingredients as well as for vitamins A and E. The manufactured chemicals will be used mainly in home and personal care products and fine fragrances, as well as in the food and pharmaceutical industries

Duties and Responsibilities in the above Project:

Lemongrass Projects is divided into two plants, Citral and Menthol. I was assigned in Menthol plant as a Senior Piping Designer. My duties and responsibilities are to produce a 3D model of one area in Menthol Plant. Ensure that the model was reviewed and approved by client (BASF PETRONAS Chemicals). Extract the isometric drawing and issued for construction.

SHELL JURONG ISLAND PTE LTD, THRU (BRUNEL INTERNATIONAL, S.E.A. PTE LTD.)

Singapore is the Shell Group’s largest oil and petrochemicals manufacturing centre in Asia Pacific. It is over 120 years since Shell first invested in Singapore. Shell Jurong Island is made up of several chemical manufacturing assets that produce per year of the following:

120,000 tonnes of ethylene oxide, which is converted into ethylene glycols and high purity ethylene oxide, and up to 40,000 tonnes of ethoxylates. These products are used in applications such as polyester fibres, polyester resins and detergent surfactants.

350,000 tonnes of styrene monomer, the starting material for plastics such as polystyrene, expandable polystyrene and acrylonitrile-butadiene-styrene. The main applications for these products are in the automotive, electrical, appliances and packaging industries.

175,000 tonnes of propylene oxide (PO), used in a wide range of chemical derivatives including polyols, propylene glycols, glycol ether solvents and flame retardants.

220,000 tonnes of polyols, the main derivative of PO, which are used primarily to produce polyurethane foams, elastomers, adhesives and sealants. Examples of the most important polyurethane end-use applications and markets are furniture and bedding, shoe soles, appliances and construction insulation elements and the automotive industry in general.

SENIOR PIPING DESIGNER

Shell Chemical Seraya Pte Ltd (Singapore), October 2013 to June 2014

Projects:

SMPO2 – The main product of this plant is Polyols, the main derivative of propylene oxide, which are used primarily to produce polyurethane foams, coatings, elastomers, adhesives and sealants.

Duties and Responsibilities in the above Project:

Shell Jurong Island had four operational plants here in Singapore, and yearly, there’s one plant scheduled for Shut-down for maintenance. I worked in plant SMPO2 which having it’s shut down in October 2014. As Piping Designer, my responsibility is to prepare Detailed Design for some system that needs piping replacement. My duty includes preparing Piping Isometric, P&ID updating, Piping Plan Drawing, and MTO for all the items needed for the maintenance.

EVONIK S.E.A. PTE LTD. THRU (BRUNEL INTERNATIONAL, S.E.A. PTE LTD.)

Evonik (SEA) Pte Ltd is a wholly owned subsidiary of Evonik Industries, the creative industrial group from Germany. Evonik is a global leader in specialty chemicals.

LEAD PIPING DESIGNER

Evonik Pte Ltd (Singapore), February 2013 to September 2013

Projects:

Me5 Project – is a Methionine complex at Jurong Island, Singapore. The project is the largest company’s chemical investments to date. It will have a production capacity of 150,000 MT/year. The plant was expected to become operational in the second half of 2014. Evonik aims to strengthen its core business with essential amino acids for animal nutrition.

Duties and Responsibilities in the above Project:

Me5 project – As Area Lead Design in Client side (Evonik), my responsibilities were to ensure that all Piping Layout were made as per standard, P&ID, and client requirements. Isometric extraction was as per schedule to avoid any delay on fabrication. Checking Isometric drawings and review model using Navisworks. Coordinate with Area Lead of EPCM contractor and other discipline.

WORLEY PARSONS PTE LTD. (SINGAPORE) THRU CADSKILLS PTE LTD

Worley Parsons has been delivering engineering and project management services to the global hydrocarbons industry for over sixty years. Worley Parsons scope global project services span the entire asset lifecycle from the initial conceptual phase of major green field developments to ongoing asset services and brown field modifications projects. Company’s capability and experience spans all oil and gas extraction and processing facility types and global coverage enables to provide comprehensive services to customers wherever needed.

PIPING DESIGN ENGINEER

Worley Parsons Pte Ltd (Singapore), May 2011 to December 2012

Projects:

BASF, 11kt IRGANOX 1010 Project, Jurong Island Singapore

BPGSP – Black Point Gas Supply Project, CLP, Hong Kong

Duties and Responsibilities in the above Project:

BASF Irganox 1010 Project - The project starts at De-construction stage. During this stage I performed a several site visits to prepare De-construction drawing such as Equipment Layout as per client requirement. Prepared Tie-in List, De-construction model using PDS, extract De-construction Isometric and attended a numbers of coordination meetings with other discipline and with the client. At FEED stage, I prepared Equipment Layout as per new plant requirement. Prepare FEED Tie-in List considering existing and new equipments and pipe lines as per FEED P&ID. Detail Design stage finished December 2012, my responsibility is to support Piping Lead Designer for the completion of all deliverables as per schedule agreed with the Client. Preparing Equipment Layout, Piping Layout, Isometric Drawings, Support Detail, Tie-in List. Prepare 3D Model using PDS software.

BPGSP CLP - To prepare piping layout based on P&ID and Project Specifications. Guide a group of PDMS Drafter to create 3D model, Piping Arrangement and extract Isometric Drawings. Prepare detailed design drawing of Pipe support. To ensures that all Isometrics and Piping Arrangement drawings will be deliver on schedule.

Site Assignment: (July 17, 2011 up September 30, 2011)

Projects:

BPGSP – Black Point Gas Supply Project, CLP, Hong Kong

Duties and Responsibilities in the above Project:

To update 3D model using PDMS, based on the changes at site. Extract latest isometric drawings, update Piping General arrangement and prepare detailed drawing of Pipe support. Do dimensional check at site to avoid clashing on existing pipe or structures especially in Tie-in area. Survey the best pipe support location.

GULF MARINE SERVICES (GMS)

Gulf Marine Services in Mussafah Abu Dhabi UAE owns and operates Elevated Support Vessel. These assets serve the oil and gas industry worldwide and focus on well maintenance and work over, offshore accommodation, diving and construction. In addition to this, GMS is capable of supporting salvage and offshore towage.

Gulf Marine Services is currently the largest Elevating Support Vessel operator in the Middle East supplying a modern fleet of self propelled barges to the oil and gas market which is unrivalled in the region.

PIPING ENGINEER

Gulf Marine Services (GMS), Abu Dhabi, UAE, March 2009 – February 2011

Projects:

GMS Endurance 6101

GMS Endeavour 6102

Duties and Responsibilities in the above Project:

To supports the Project Engineer for all the aspects of Engineering works like preparation and reviewing of drawing, isometrics, procurement of materials, Closing ABS local surveyor’s comments. Coordinating with the Construction team and ensuring that all the piping were installed as per drawing and as per standard.

IHI PHILIPPINES INC., (IPI)

A professional engineering firm founded in 1996, provides technical consultancy and engineering design services for domestic and international markets. IPI is one of the main overseas subsidiary companies of Ishikawajima-Harima Heavy Industries Co. Ltd. (IHI) Japan.

PIPING DESIGN ENGINEER

IHI Philippines Inc.,(IPI), Pasig City, March 2008 – February 2009

Projects:

Sonatrach LPG Plant (GP1Z), Arzew Complex, Algeria

VCM Shintech, Plaquemine, Louisiana, USA

Okinawa LNG Gas Terminal, Okinawa, Japan

Duties and Responsibilities in the above projects:

Sub-leader of Piping group that support the PIC for checking and controlling project status. Prepare 3D model of Piping, Equipments and Structures based on client’s requirements and standards using Plant Design Management System (PDMS). Prepare Piping General Arrangement Drawings, Piping Layout Drawings, Pipe Isometric Drawings and Pipe Support Fabrication Drawings using Plant Management System (PDMS) and AutoCAD. Prepare Bill of Quantity.

FIELD DESIGN ENGINEER

IHI Co. Ltd. (Qatar), Ras Laffan Industrial City, Qatar, September 2006 - March 2008

Projects:

Qatar Gas II (Onshore), Ras Laffan Industrial City, Qatar

Duties and Responsibilities in the above project:

As a representative of IHI Tokyo Engineering Head Office at site, Field Engineer require to attend meeting with the Clients, Coordination with the subcontractors, Coordination with the fabricators, Giving assistance to IHI Construction Team, Prepare Field Design Changes, Review Material Approval Request, Modification of Drawings, Coordination with the Tokyo Engineering Head Office, Follow-up and monitor delivery of approved detailed design for fabrication, and other related engineering works.

GROUP LEADER-EQUIPMENT DESIGN GROUP

IHI Philippines Inc (IPI), Pasig City, November 2005- September 2006

Projects:

Qatar Gas II LNG Tank Project, Ras Laffan Industrial City, Qatar

Petronet LNG Tank Project, Dehej, Guharat India

Duties and Responsibilities in the above projects

Responsibilities but not limited to plan, direct, and coordinate a successful development of several projects, prepare of Man-hour estimation, control of man-hour consumption, schedule control, workload distribution

Preparation of detailed fabrication drawings of plans using AUTOCADD with latest version and forecast on going detailed and planning works for Low pressure Tanks such as LNG and LPG tanks, LNG and LPG tank piping system arrangement, Terminal piping system arrangement, Loading and unloading area, and detailed isometric drawings including bill of materials. Overall tank arrangement drawing with design data, internal piping system arrangement and detailed fabrication with piping supports, piping arrangement for conduit heaters, Inner tank LNG transfer system, top and bottom fill piping, LNG temperature, level and density piping system, level gauging and overfill protection, draining system (for hydro test), Tank’s nozzle, venting and high elevated flaring system, Inner tank and outer tank (vapor barrier) detailed design, roof structures, vacuum relief valve and discharge orientation

MEMBER-EQUIPMENT DESIGN GROUP

IHI Philippines Inc (IPI), Pasig City, February 2003- November 2005

Projects:

Cameron LNG Terminal (Onshore), Houston USA

Chinese PetroChemical Company (Onshore), Taipe Taiwan

Altamira LNG Terminal (Onshore), Tamaulipas Mexico

Qatar Gas I & II (Onshore), Ras Laffan Industrial City, Qatar

Tottori LNG Satellite (Onshore), Hiroshima Japan

Hokkaido Gas Terminal (Onshore), Hokkaido Japan

Duties and Responsibilities in the above projects:

To support the group leader and other member in preparing detailed fabrication drawings of plants using AUTOCADD with latest version and forecast on going detailed and planning works for Low pressure Tanks such as LNG and LPG tanks, LNG and LPG tank piping system arrangement, Terminal piping system arrangement, Loading and unloading area, and detailed isometric drawings including bill of materials.

SKILLS

Performs Engineering Designs with Engineering Computer Software Applications such as:

AutoCAD 2000 to 2014 (Proficient)

PDMS – Aveva (Proficient)

PDS - Bently (Proficient)

Microstation – Bently (Proficient)

PDMS Review – Aveva (Proficient)

SPR – Smart Plant Review

Smart Plant Review – Bently (Proficient)

Navisworks – Autodesk (Proficient)

X-Steel - Tekla (Basic Knowledge Only)

AutoPipe – Bentley (Basic Knowledge Only)

Microsoft Office – (Proficient)

EDUCATION

Bachelor of Science in Mechanical Engineering

Rizal Technological University, Boni Ave. Mandaluyong City

1997 - 2002

Contact this candidate