Resume

Electrical Maintenance

Location:

Yangon, Yangon Region, Myanmar

Posted:

August 11, 2015

Contact this candidate

Resume:

Joel Rosarda Resurreccion

B* L* Plaza Ville, J.K. Mata, Street,

Rosario, Cavite, PHILIPPINES 4106

(Home-phone) +634********

(Mobile Phone) +63-917-*******

(Work email add) acq6x5@r.postjobfree.com

acq6x5@r.postjobfree.com/ acq6x5@r.postjobfree.com

acq6x5@r.postjobfree.com

Objective:

To cooperate and maintain pipelines, production processes and utility systems onboard in safe and efficient manner in accordance with approved operating procedures, guidelines, legislative requirements and industry best practice.

Employment History

COENS Energy – Daewoo International (SHWE) Myanmar

DAEWOO - Onshore Gas Terminal (OGT)

Kyauk Phyu, Ramree Island

Union of Myanmar

Tel.: 95-1-656981/2/3

COENS Energy (Myanmar Office)

#203 Moe Sandar Condo 41C Moe sandar Street Kamaryut Township

Union of Myanmar

Email: acq6x5@r.postjobfree.com

Tel.: +95 (0) 1 537 713

OGT – Electrical Lead/Responsible Electrical Person (REP)

October 09, 2014 – present

Responsibilities:

Leads, oversees and participates in the work of staff responsible for the maintenance, repair, and installation of electrical equipment to include heating, ventilating, and air condition (HVAC) equipment up to 400 volts.

Perform the switching-over and synchronizing of the Gas Engine Generator and Emergency Diesel Generator.

Electrical work may be performed on controls, motors, air conditioners and building control systems. Specifically, performing the more complex advanced level functions and providing training to less experienced Technicians

Overseeing and performing predictive, preventative, and corrective maintenance on assigned equipment, and overseeing and assisting contractors/vendors as needed.

Pulling wire and wiring circuits as shown on the drawings.

Test systems for proper installation.

Maintaining and repairing equipment at pump stations and plant facilities such as motors, fans and package air conditioning units.

Responsible for creating PTW (Hotwork/coldwork Permit) for switching and Lock-Out-Tag-Out (LOTO) for systems up to 400 volts and updating the SAP - Computerized Maintenance Management System (CMMS) database and scheduled maintenance activities to effectively manage the assigned area.

Verify the work of assigned employees for accuracy, proper work methods, techniques, compliance with standards and specifications and safety.

Respond to inquiries and resolving complaints in a courteous, efficient, and timely manner.

Estimating time, materials, and equipment required for jobs.

Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair.

Diagnose malfunctioning systems and components using test equipment and hand tools. Locate the causes of breakdowns and correct the problem.

Advise management on whether continued operation of equipment could be hazardous.

Follow Job Safety Analysis (HIRA/TRA) and Lockout/Tag-out procedure.

Implement OSHA standards in work culture to achieve zero recordable injury

Inspects plant and maintains clean and safe work environment

Other duties as assigned

Team Energy – MAERSK Oil and Gas (Qatar)

P.O. Box23890 Souq Al Thuraiya,

Office no. 10, Salwa Road,

Doha, Qatar

Tel. No. +974 (0) 4446 935

Fax No. +974 (0) 4321 760

Email: acq6x5@r.postjobfree.com

Website: www.team-energy.com.qa

Satellite Wellhead Operator/Maintenance (Multi-Technician)

H-location Satellite Platform, Al-Shaheen Oilfield, Qatar

October 07, 2009 – October 08, 2014

Responsibilities:

Operate and maintain wells, production processes and utility systems onboard Maersk Oil Qatar Offshore satellite production platforms in safe and efficient manner.

Monitor process and utility equipment operating parameters and record data.

Manage chemical stocks and chemical injections optimization.

Conduct process stream sampling techniques and basic laboratory analysis methods.

Complete safe and efficient replacement and repair activities in the event of failure or malfunction ensuring quick restoration; troubleshooting malfunctions and take corrective actions as necessary.

Optimize production and uptime when executing maintenance activities which require shut down / isolation of equipment.

Prepare adequate documentation and reporting for onshore management consideration regarding wring design, poor workmanship and non compliance to MOQ standards; take appropriate action within level of authority.

Conduct other operational and maintenance activities (Electrical and Instruments) as directed by Supervisor.

Thorough understanding and use of P&ID and C&E drawings and how isolation plan is develop.

Involved in the Commissioning, Start-up, Normal Production and Shutdown Operation of the H-Location (Maersk-Oil Qatar) Platform.

Contribute to maintaining a strong safety culture within MOQ operations.

Execute safe work processes and comply with relevant health, safety (occupational and process) and environmental excellence procedures and controls within area of responsibility to guarantee employee safety, legislative compliance and a responsible environmental attitude.

Participate as part of the Platform Emergency Response Contingency Plan as per duty roster.

Provide daily reports to Supervisor on health, safety and environmental issues related to area of work; take corrective action whenever necessary.

Actively participate in daily communication and coordination between off and onshore businesses pertaining to key business matter.

Participate in the companies Competency Assurance Program (CAP) and Training Matrix and help- create a learning environment.

Proactively take responsibility for self-progression by keeping abreast with latest developments, knowledge and innovation in.

Knows how to operate SCADA and DCS controller.

Knows how to read Process and Instrument Diagram, Electrical Schematics and Single-Line Diagrams and Cause & Effect Diagrams.

Knows how to use Electrical and Instrument test equipment.

Permit issuer/receiver and isolation plan maker.

Knowledge in SAP notification on maintenance request, activity report, creates work order for corrective and preventive maintenance.

ERT member

Team Energy – MAERSK Oil and Gas (Qatar)

P.O. Box23890 Souq Al Thuraiya,

Office no. 10, Salwa Road,

Doha, Qatar

Tel. No. +974 (0) 4446 935

Fax No. +974 (0) 4321 760

Email: acq6x5@r.postjobfree.com

Website: www.team-energy.com.qa

Offshore Platform Electrical Technician (Commissioning and Maintenance)

(Sime Darby Engineering Sdn, Pasir Gudang, Malaysia)

January 1, 2009 – October 06, 2009

Responsibilities:

Awareness of Requirements when working on Ex rated equipment.

Identify the maintenance requirements of generators, motors and associated switch gear as used on an offshore platform.

Understand the need for a Permit To Work system and complete / obtain forms as necessary.

Work safely with H2S

Understanding how to read a P&ID & electrical circuit diagrams.

Complete Risk Safety Analysis prior to completion of tasks

Participate in the companies training & competency assessment program

Ensure that all information, written and verbal obtained in the course of the work is handled in strict confidence.

Follow all Company policies, procedures & local by laws when completing tasks.

Saudi Polyolefins Co. (SPC) – TASNEE Petrochemicals

P.O. Box 35579, Jubail Industrial City31961,

Al-Jubail, Kingdom of Saudi Arabia

Tel. No. 03/3599543 – 9534 - 9542

Fax No. 03/3599596

Senior Electrical Specialist (Commissioning and Maintenance)

September 29, 2007 – October 31, 2008

Responsibilities:

Polyethylene Plant

SPC – TASNEE Electrical Commissioning

Supervise and perform the mechanical completion of the 3 X 13.8 KV (50/60 MVA) and 1 X 10.5 KV (50 MVA) power transformers.

Monitor the die-electric breakdown transformer oil test during the oil filling and circulation to transformer system.

Perform alarm and trip signal and function test (interface) of upstream 34.5 KV to downstream 13.8 KV and 10.5 KV power transformer with SIEMENS-Italy and SIEMENS-Germany Vendor (winding temperature, oil temperature, transformer tank temperature, bucholz relay, pressure relief valve, conservator oil level switch and on-load top changer).

Perform the Insulation Resistance (5-KV dc for 1 minute) and High Potential Resistance (42-KV dc for 15 minutes) on Primary of the Power Transformer, main power cable 1x400 mm (Hipot – 70 KV for 15 minutes) and line checking.

Supervise the torque tightening of the transformer termination at terminal box of primary and secondary, bus duct connector, bus bar and Neutral Ground/Earth Resistor.

Perform stability and sensitivity of transformer and real earth fault (REF) test.

Perform ratio, polarity and knee voltage test for current transformer.

Perform and check the mechanical interlocks of Medium Voltage Panels.

Perform the internal interlock and intertrip of the 13.8 KV power transformers to Incomer Vacuum Circuit Breaker (VCB).

Perform function test of Line Differential Protection Relay (SIEMENS – SIPROTEC 7SD600) to Lock-out Relay 86T1, ABB scada relays at Lock-out Relay 86T2, ABB supervision Relays for trip circuit, Bus Differential Lock-out Relay 86B and Power Transformer Lock-out relay 86M.

Perform the test for Incomer, Bus Potential Transformer, Bus-Tie and Feeders of Medium Voltage Vacuum Circuit Breakers (VCB).

Perform the simulation of inter-trips from upstream 34.5 KV to downstream 13.8/10.5 KV prior to energisation of power transformers.

Perform the test of annunciator panels, power capacitors, distribution and switch boards.

Perform the operation of ABB REF plus protection relay.

Polypropylene (PP) and Propane Dehydrogenation Plant (PDH) - Operational Plant

SPC – TASNEE Electrical Maintenance

Tends 230 KV-250 MVA (main substation) & 34.5 KV substations.

Assist Electrical Supervisor on daily task at existing PDH and Polypropylene Plant.

Permit receiver and issuer.

Oversees the work of the unit and suggests improvements and changes.

Trouble-shoot and repairs electrical equipment such as Master-Drive or Variable Frequency Drive (VFD).

Determines work requirements and allocates duties to Electricians.

Confers the Electrical Supervisor to coordinate activities with other organisational units.

Explains and enforces safety regulations.

Oversees the work of the unit and suggests improvements and changes.

In-charge of switching on/ off of the motor controls at MCC used by Production Operators.

May perform the tasks of an Electrician

V. People Energy (Phil. office)

1535 M. Adriatico St., Ermita, Manila, Philippines

Tel. No. 632-***-****-23 / 632-***-****

Fax No. 632-***-****

E-mail: acq6x5@r.postjobfree.com

V. People UK Ltd. / V. Offshore Ltd. (U.K. office)

2 Queen’s Gardens, Aberdeen, AB15 4YD, United Kingdom

Tel. No.: +44 (0-122*-***-***

Fax No.: +44 (0-122*-***-***

Commissioning Electrical Technician

July 30, 2006 – August 01, 2007

NEXEN Petroleum- Buzzard Platform, North-Sea, United Kingdom (Oil and Gas Industry)

August – October, 2006

Responsibilities:

Perform Punch-list activities on all electrical and instrument equipment.

Perform Commissioning Check Procedure (CCP) and Mechanical Check Procedure (MCP)

Perform test and Test Certificate to record the function testing and preparation for energisation of electrical equipment such as LV/HV switchboards, distribution Boards, Lighting, small power receptacles and welding outlets, instrument and Electrical Control Panels, electric motor, trace Heating Circuits, protection relays, HV /LV Circuit Breakers, LV Starters / Contactors / Fused switch and overload protection units by injection.

Perform test and Test Certificate to record the function testing, preparation for energisation of equipment not specifically defined by other electrical function test certificates.

Perform line checking.

May install Electrical Cable Glanding.

Perform the wiring installation for Local Control Switch and motor terminal box, space heaters, panel interconnection wiring and perform checking on circuit using Residual Current Device (RCD).

Perform the installation of earth bonding and cable trays.

Perform the static electrical test such as motor winding resistance (u-v, v-w and w-u), motor insulation resistance tests (u-G, v-G and w-G), MCC insulation resistance test (u-G, v-G and w-G) and cable resistance test (R-G, Y-G, B-G, R-Y, R-B and Y-B).

Perform visual dynamic inspection/test on motor vibration during the solo-run/test run on site.

Perform motor test run for 270 minutes while taking the motor/frame and bearing temperature using Ray Tech as British Petroleum BP standard.

Perform torque tightness on MCC bus bar.

Check electric motor’s rotation if clockwise or vice-versa rotation.

Attend and participate Toolbox Meeting and Toolbox Talk.

Perform housekeeping (5s) on substation, workshop and work area.

NPC Alliance Corporation (Polyethylene Plant)

(Formerly BPC-Bataan Polyethylene Corp.)

PPDC-Petrochemical Industrial Park, Bats 2, Mariveles, Bataan, Philippines

Production/Operation Department

Process Field Technician (Utilities Operator)

April 10, 2006 – July 31, 2006

Responsibilities:

Tends and responsible in Utilities Area to ensure that the process operation is supplied with its process needs.

Operates and monitors the unloading of imported raw materials (Ethylene Monomer and Butene-1) from the jetty unloading arm to tank farm.

Operates and monitor the operation of Boil-off-gas (BOG) system, the vaporization and liquefaction of Plant’s main raw materials prior to feed to Polymerization Unit.

Perform the operation of Purification Unit of raw material to eliminate the impurities of the imported Ethylene monomer to ensure that the Polymerization Reactor will operate efficiently and effectively.

Perform treatment operation of raw-water (supplied by PPDC) for Treated Water to be supplied in Demineralization, Cooling Tower, and Deaerator for Boiler and treated water for the plant’s utilities station. Treatment operation includes from dozing of chemicals, filtration, recycling and dumping of water sludge up to transferring of treated water to Treated Water Tank. Treatment is done to eliminate the impurities of water prior to use.

Operates 3-Cooling Tower Coolers and use 4-6.9 KV electric motor pump for the distribution of Cooling Water supply for plant’s heat-exchangers and other process equipment. The operation of Cooling Water discharge is operated via manual/Distributed Control System (DCS)

Operate the Demineralization Unit via manual/Programmable Logic Control (PLC) regeneration of filtered water to be used in Boiler Feed Water, Polymerization Unit, Extruder Unit, and other process operation equipment.

Operate the Gas-Oil System (Diesel gas) to supply the Boiler System. Check of the documents from the dealer to ensure the quality of the gas-oil prior to unloading. Check the gas oil by taking sample from the sampling connection and make visual analysis. Connect grounding/earthing to the tanker before unloading the gas oil. Operate the pump and valve to unload the gas oil to plant’s gas oil tank. Operate 2 discharge pumps, one at a time via manual operation.

Operate the 2-Boiler Unit at 185-200 degree Celsius an produces 8,000 tonnes of steam per hour using LPG as Prime medium of ignition and the main source is the gas oil (diesel oil) operated via manual or Programmable Logic Control (PLC). Using Boiler Feed Water, from demineralized water to Deaerator, water feeds to boiler shell and heated to produce steam. The produced steam is then distributes to the end users.

Operate IR Instrument Air Package for instrument use.

Monitor and check of Plant’s process and instrument equipment during operation.

Performs housekeeping on Utilities Area and control room.

NPC Alliance Corporation (Polyethylene Plant)

(Formerly BPC-Bataan Polyethylene Corp)

PPDC-Petrochemical Industrial Park, Bats 2, Mariveles, Bataan, Philippines

Engineering and Maintenance Department

Electrical Technician

March 2, 2006 – April 9, 2006

Turn-around activities:

Perform housekeeping (5s) on substation and workshop area De-energized and locked/tagged-out scheduled electric motor motor-cell at MCC substation. Disconnected power line and pulled-out (13.2 KV, 6.9 KV, 440 V and 220 V) scheduled electric motors turn-around activities and brought to workshop for preventive maintenance.

Check and list motor’s nameplate in Electric Motor’s log book and perform line-to-line or coil resistance using multi-tester and micro-ohmmeter and insulation resistance test using megger tester prior to preventive maintenance.

Check visual external condition of motor body and paintwork. Inspect motor power cable and motor cable gland to ensure the safety of the motor as well as the user.

Check and inspect the local control panel, make sure that the ammeter and pushbutton works properly. Check the internal part of explosion proof enclosure or the (LCP) local control panel is moisture free.

Check the motors ventilation system, lubrication, grease nipples, earthing connection and anti-condensation heaters.

Performs motor’s associated at motor control centre (MCC) checking the indication lights/identification, setting at motor manager and tightness.

Perform internal inspection on motor bearings, rotor and stator.

Perform visual dynamic inspection/test on motor vibration during the test run.

Perform motor test run for 45 minutes while taking the motor and bearing temperature as British Petroleum BP standard.

Perform torque tightness on MCC bus bar.

Philippine Petrochemical Products, Inc.(Polystyrene Plant)

Gen. Trias Drive, Rosario, Cavite, Philippines

Engineering and Maintenance Department

Electrical and Instrument Technician

July1999 –April 2002

Responsibilities:

Performs periodic preventive maintenance service in electrical motors, high temperature oil heaters, boiler, and pneumatic valves, air-conditioning units, motor controllers, weighing scales, switch gears and generators and generator batteries.

Performs periodic calibration on turbine flow meter, temperature transmitters, temperature controllers, recorders, pressure differential transmitter, float switches, motor operated valve limit switches, temperature and pressure indicators, relief valves and pressure switches.

Installs, calibrates and repairs pneumatic valve positioner.

Examines wiring diagrams and installation areas to plan layout of wiring systems.

Responds to breakdowns, diagnoses and repairs electrical systems.

Positions and installs electrical switchboards.

Install sheathed cables.

Measures, cuts and installs plastic conduits and pulls wires through.

Splices twists and solders wires and applies tape or terminal caps.

Connects installed wires to circuit breakers, transformers, timers and other electrical equipment.

Installs and connects items such as switches, lighting fixtures and earthing systems.

Tests continuity of circuit.

Installs cable trays for expansion projects within the plant.

Performs periodic check on grounding system, static collector and 110Vdc battery bank.

Analyses drawings and specifications to determine sequences and methods of operation.

Uses electrical and electronic test instruments to trace faults.

Test-operates and monitors the performance of systems, and adjusts settings.

Records causes of malfunctioning and action taken.

May service and repair components of electrical equipment powered by hydraulic, pneumatic or other non-electrical sources.

Installs and connects wiring, safety and control devices for hoist.

Tests and adjusts hoist assemblies, components, controls and safety devices.

Diagnoses and repairs faults in hoist.

Tends substation to ensure the plant is supplied with steady power supply.

Switch-on and monitors the 1000 KVA/500 KVA generator-set in case of power failure occur.

Determines work requirements and allocates duties to Electricians.

Explains and enforces safety regulations.

Oversees the work of the unit and suggests improvements and changes.

In-charge of switching on/ off of the motor controls at MCC used by Production Operators.

Philippine Petrochemical Products, Inc.(Polystyrene Plant)

Gen. Trias Drive, Rosario, Cavite, Philippines

Engineering and Maintenance Department

Plant Electrician

November 1998 - July1999

Responsibilities:

Perform the preventive maintenance of all the motors within the plant facilities.

Install electrical wirings whenever electrical wiring is in needed.

Monitors all critical electrical motors and heaters current flow in routine basis

Replace all busted lamps within the plant premises.

Trouble-shoots and repair all malfunctioning electrical equipment.

Philippine Vinyl Consortium, Inc. (Polyvinyl Plant)

Gen. Trias Drive, Rosario, Cavite, Philippines

Production Department

Polylead Engineer (Polymerization)

October 1995-October 1998

Responsibilities:

Over-all in-charge in Polymerization area and supervise in 8 polymerization personnel including 1 recovery operator

Check the working pressure of hot/cold demineralised water and seal booster pump to be used in the process of Vinyl Chloride Monomer (VCM) prior to process operation.

Check and prepare chemicals such as the catalyst and emulsifier prior to start-up operation. Coordinate lab Chemist to check the chemical to be used in the process.

Operate 4 polymerization reactors during the shift by full checking of reactor’s pressure gauges and monitoring its temperature.

Coordinate boiler tender operator for the steam needed, demineralization operator for the demineralise water for the poly-process operation. Coordinate Dryer operator to dry the polymer and bagging of the resin.

Ensure all chemicals needed in the operation is well prepared prior to start-up

Ensure that the reactors are clean for the next batching of operation

Monitors production processes during the shift.

Install and operate reactor cleaner, the Hydro Reactor Cleaner (HRC) with a maximum pressure of 5000 psig

Perform housekeeping in Polymerization Area.

Education

Technological Institute of the Philippines 1989-1994

B.S. Electrical Engineering (BSEE)

Don Severino Agricultural College 1984-1988

High School

Buna Lejos Elementary School 1978-1984

Elementary

Training and Seminars:

Small Bore Tubing

June 28-30, 2014

P2 – Introduction to Production Facility Operations

PetroSkills - Qatar

February 13 – 17, 2014

Banksman & Slinger / Load Handler Level 1

EnerMech UAE LLC

February 10 – 11, 2014

SIEMENS CONTROL SYSTEM - OPERATOR TRAINING COURSE

SIEMENS Oil & Gas - Qatar

Nov. 21 – 22, 2013

Task Risk Assessment (TRA) / Hazard Identification and Risk Assessment (HIRA)

Velosi Certification - Qatar

Sept. 01, 2013

Further Offshore Emergency Response Team Member (FOERTM)

ENERTECH AVIATION & MARITIME ACADEMY - Qatar

June 5– 6. 2013

CompEX

JT Limited / UKAS (Petrotec - Qatar)

April 24, 2013

High Voltage / Low Voltage

Training Development Delivery - Qatar

March 14 – 18, 2013

Tropical Further Offshore Emergency Training (TFOET)

ENERTECH AVIATION & MARITIME ACADEMY - Qatar

November 15, 2012

ATEX Course

Training Development Delivery - Qatar

April 7-8, 2011

Basic First Aid+Advance Medical First Aid+Oxygen Administration training

Qatar International School - Qatar

July 31 – Aug. 03, 2010

H2S/BA

ENERTECH AVIATION & MARITIME ACADEMY - Qatar

October 20, 2010

Process Safety + EX Course

Mercure Grand Hotel

Doha, Qatar

May 08-11, 2010

Man-Overboard (MOB) Training

IDESS (Philippines)

Nov. 30 – Dec. 02, 2009

OLF Coxwain Training

IDESS, Philippines

Sept 27- 30, 2009

Tropical – Basic Offshore Safety Induction and Emergency Training (T-BOSIET)

Enertech Aviation and Maritime Academy - Qatar

Protection & Control Relays

SIEMENS - Arabia

November 21, 2007

ABB Power Transformers

ABB Power Technologies AB (Sweden) - KSA

November 10, 2007

Theoretic Transformer Site Training Program

HYUNDAI HEAVY INDUSTRIES CO., LTD. - KSA

November 5 – 6, 2007

Cummins Engine Generator Set

HYUNDAI HEAVY INDUSTRIES CO., LTD. - KSA

November 01, 2007

Electrical Technician (Class B+) Trade-test

EXECUTIVE TECHNICAL CONSULTANTS

Trade Test and Training Center Inc.

3190 New Panaderos St., Ext., Sta. Ana, Manila, Philippines

Basic Fire Fighting