Project Design

PROFESSIONAL RESUME

NAME : ISIDRO PANCHO VINLUAN

HOME ADDRESS : ****-* *. ****** ******, Brgy. Pio del Pilar,

Makati City 1230, Philippines

Phone No.+639*********(Phil)

EDUCATION : B.S.MECHANICAL ENGINEERING (U/G)

Manuel L. Quezon University / Philippine College of Arts &

Trade

SPECIAL TRAINING : Process Control & Instrumentation

University of the Philippines, Diliman, Quezon City

EXPERIENCE SUMMARY :

ONSHORE - PLANT MECHANICAL EQUIPMENT DESIGN LAYOUT, CONCEPTUAL / FRONT END ENGINEERING DESIGN (FEED) PROCEEDING TO DETAIL DESIGN ENGINEERING OF VARIOUS NEW AND EXISTING FACILITIES IN OIL & GAS PETROLEUM REFINERY, PETROCHEMICAL, MODIFICATIONS DURING ONGOING COMMISSIONING OF NEWLY START-UP REFINERY, INCLUSIVE OF VARIOUS PROCESS PLANT DE-BOTTLENECKING PROJECTS, PRODUCT MOVEMENT TANKFARMS, PIPE TRACKS, MILITARY STORAGE DEPOT(POL) WITH PUMPING STATIONS, PIGGING FACILITIES, SUPPLY PIPELINES FROM LOADING BAY TO PUMP STATIONS TO STORAGE FACILITIES, OIL & GAS AND WATER WELL CHRISTMAS TREES PIPING SYSTEM.

FULLY PARTICIPATED IN THE PREPARATION OF BIDDING ITB AND DOSSIER REFERENCES REQUIRED FOR THE ENTIRE PROPOSED DE-BOTTLENECKING PROJECTS, INCLUSIVE OF COUNTER PRICING ESTIMATES OF PROPONENTS AND MONITOR TIE-INS LOCATIONS / STATUS DURING REFINERY WIDE SHUTDOWN.

DETAIL DESIGN OF ABOVE / UNDERGROUND CROSS-COUNTRY PIPELINES, PUMP STATIONS AND PIGGING LAUNCHERS / RECEIVERS FACILITIES, INCLUDING BUT NOT LIMITED TO PLAN AND PROFILE DESIGN DRAWINGS.

CAESAR II & SIMPLEXS (DOS VERSION) PIPING STRESSING OF VARIOUS EXISTING AND NEW PIPING SYSTEM FOR VARIOUS PROCESS UNITS IN THE OIL & GAS REFINERY. THIS INCLUDE THE STUDY OF THE ENTIRE REFINERY FLARING SYSTEM DUE TO THE PROCESS EFFECT OF DE-BOTTLENECKING ADDITIONAL EQUIPMENTS.

PROJECT TEAM MEMBER AS TECHNICAL SUPPORT FOR THE IMPLEMENTATION OF DE-BOTTLENECKING PROJECT.

PROJECT COST ESTIMATION USING THE ASPEN TECH PROGRAM BASING ON PLOT PLANS AND PROCESS & INSTRUMENT DIAGRAMS (P&ID’S), DATA SHEETS OF ONSHORE PROJECTS.

OFFSHORE TOPSIDE- FOR FEED, EPCIC PROPOSALS PREPARE COSTING FOR PIPING DESIGN SCOPE, PREPARE TECHNICAL BID QUALIFICATIONS / CLARIFICATIONS, PROJECT EXECUTION PLANNING, HISTOGRAM, MANPOWER RESOURCE PLANNING, LISTING OF DELIVERABLES. AS LEAD/HOD WILL DO THE PIPING MEMBER PERFORMANCE APPRAISAL

DESIGN LAYOUT CHECKING OF EQUIPMENT ACCESSIBILITY, LAYDOWN AREAS, LIFTING DEVICES, PIPING LAYOUT TO/FROM VARIOUS DECKS OF TOPSIDE FACILITIES, QC/CHECKING OF PIPING DELIVERABLES ISOMETRICS AND PIPING PLANS FOR PFLNG, FPSO, VARIOUS TOPSIDES AND WELL CHRISTMAS TREES PLATFORMS.

HVAC- DESIGN LAYOUT OF AIRCONDITIONING AND VENTILATION SYSTEM FOR CENTRALIZED, PACKAGED UNITS, CHILLER UNITS AND ELECTRICAL DESIGN/ INSTALLATION OF VARIOUS BUILDING OCCUPANCYS AND HOUSING PROJECTS.

EXPERIENCED OF SAUDI ARABIAN OIL COMPANY(ARAMCO) STANDARDS AND PROCEDURES & SHELL STANDARDS- DEP (DESIGN ENGINEERING PRACTICES) AND MESC STANDARDS.

ATTENDED VARIOUS TRAININGS INHOUSE OF PARSONS, FLUOR DANIEL (Phil.) & SAUDI ARAMCO TRAINING PROGRAM, LIKE SUPERVISORY SKILL AWARENESS, QUALITY IMPROVEMENT PROCESS, PIPING MATERIALS ENGINEERING, PROJECT COSTING ESTIMATES USING ICARUS ASPENTECH SOFTWARE, CAEZAR II / SIMPLEXS PIPE STRESSING, QC / CHECKING PROCEDURES, CITRIX MANPOWER TRAINING.

EXPERIENCE IN REVERSE ORDER

TECHNIP GEOPRODUCTION (M) SDN BHD

Period : August, 2014 – May, 2015

Client : JGCS/ NSRP

Project : Nghi Son Refinery and Petrochemical Complex (Workshare with TPVN)

Project Position : Piping Layout Design / Support Checker

Job Responsibilities : Design Checking of piping deliverables of various facilities

prior to IFC.

Period : September, 2013 – April, 2014

Client : INPEX / DSME

Project : ICHTHYS FPSO- Floating Platform Storage and Offloading

Project Position : Layout Design / Support Checker

Job Responsibilities : Design Checking of piping deliverables of various facilities

prior to IFC.

Period : March, 2013 – August, 2013

Client : SHELL Berhad

Project : preludeFLNG- Floating Liquified Natural Gas

Project Position : Layout Design Checking / Supports

Job Responsibilities : Design Checking of piping deliverables of various facilities

prior to to IFC.

Period : Nov, 2011 – March, 2012

Client : BHP Billiton Petroleum Pty Ltd

Project : Macedon Gas Development Project (Onshore)

Project Position : Senior Layout Design Checker

Job Responsibilities : Design Checking of equipment layout, piping deliverables of various

Facilities prior to IFC.

TECHNIP VIETNAM CO. LTD.

Centec Tower 3rd Floor, Unit305, 72-74 Nguyen Thi Minh Khai St.

District 3, Ho Chi Minh City

POSITION - HEAD OF DEPARTMENT- PIPING

(Assignment)

As head (HOD) of piping department, to organized available staff for manpower resource planning for various project proposals and ongoing / incoming projects, prepare Weekly Progress Reports, and prepare MoM. As a project focal point, coordinate to project team of various queries and reporting to PM.

Prepare project proposals for Offshore and Onshore, manhours cost estimates for Piping design scope which include Vendor Document Incorporation and Records, deliverables listings, histogram, bid technical clarifications and qualifications and manpower resource planning, project execution planning.

Assist HR in manpower recruitment, conduct interviews of applicants, and personnel requisitioning, prepare performance appraisals of the piping department.

Projects during my assignment;

Period : March 2012 – March 2013

Client : Petronas- Malaysia

Project : SK316 GAS DEVELOPEMNT PROJECT

Project Description : Provision for (FEED) and (EPCIC) Engineering,

Procurement, Construction, Installation & Commisioning

( Joint effort between TPVN, PTTI and TPGM)

Client : JVPC / PetroVietnam

Project : Rang Dong Field HCG-EOR-FFS Project

Project Description : Provision for (FEED) and (EPCIC) Engineering,

Procurement, Construction, Installation & Commisioning for

Client : JVPC / PTSC- Vietnam

Project : THAI-BINH- HAM RONG PIPELINE and GDC Project

Project Description : Provision for (EPCIC) Engineering, Procurement and

Construction .

Client : Lam Son JOC- PVE Office,Vietnam

Project : ThanLong-DongDo WellHead Platform

Project Description : Detail Design Engineering of ThanLong-DongDo WellHead

Platform

Project Position : Project Piping Lead / Checker

Job responsibilities : For all the above project, I am responsible of supervision,

delegation, design interfacing with design office counterpart,

internal / project model review with project team and client. Answer

queries from counterparts during FEED and DDE stage

TECHNIP GEOPRODUCTION (M) SDN BHD

Wisma Technip, 241 Jalan. Tun Razak 50400 K.L.

Period - October 2007 to present

POSITION- SENIOR PIPING / SUPPORT DESIGNER CHECKER

GUMUSUT KAKAP TOPSIDE OFFSHORE PROJECT- DETAIL DESIGN ENGINEERING- Most of all my responsibility is for the QC/ Checking of piping layout and of all deliverables prior to issuance to construction/fabrication. Design location of all vessel clips and supports according to standards. Checking of special supports details basing on pipe stress results and recommendations.

CILI PADI Gas Field Development Project (OFFSHORE- Sarawak Shell Berhad )- Responsible for the Checking of piping layout of all areas of various platforms Production, Compression, Receiving, Drilling Platform, interconnecting pipeline and various De-Bottlenecking scope for Bid Tender purposes and proceeding to Detail Design Engineering and preparation of all required standard / engineered pipe supports for this project. Checking of all deliverables prior to issuance for construction.

FOSTER WHEELER INTERNATIONAL CORPORATION

Thailand Operations(TOPS), Sriracha, Chomburi Thailand

Period - Jan 22, 2007 to Oct 02, 2007

POSITION- SENIOR PIPING DESIGN ENGINEER

EXXON Hydrocarbon Expansion Project(Singapore)- Responsible for the piping design layout of Reactors and checking of tie-ins to existing facilities. These includes various activities to which complete engineering phase can be met.

CDU3 Expansion Project, Thailand Oil Refinery- Responsible for the QC / Checking of all deliverables/isometrics prior to issuance for fabrication / construction ( done by Chemtech, India), which includes model modifications.

TECHNIP ABU DHABI

Hamdan St., Abu Dhabi

Period - July 14, 2006 to Oct. 11, 2006

POSITION- SENIOR PIPING DESIGNER / CHECKER

STRESS GROUP ACTIVITY

Most of my responsibility are for the checking of correct layout and type of supports used by designers in piperacks and pipetrack of LNG and Flare lines, to make sure stress critical lines are correctly supported as per stress reports prior to IFC.

FLUOR DANIEL INC. PHILIPPINES.

FIL-INVEST Corporate City, Alabang, Muntinlupa City, Philippines

Period - Mar 12, 2001 to July 14, 2006

POSITION- SENIOR PIPING DESIGNER / MATERIAL CONTROL SPECIALIST II

Yanbu National Petrochemical Co. (YANSAB), Saudi Arabia

a work share project with Fluor Daniel Ltd., Camberly, UK

I was principally responsible for the preparation of all the RFQ (Request for Quotation) of all piping materials for the entire project including but not limited to engineered items, specialty items, chemical injection fittings, and all types of valves, etc.

DOW Chemical Co., Olefins II Project, Kuwait - Cost Estimation for Piping, Equipments, Instrumentations, Structural, part Civil for the entire Styrene Plant & Ethylene Glycol Refining System, Utilities, LPK Pelleter, Sulphur Recovery Systems including De-bottlenecking of existing facilities. This project is a work share with Fluor Daniel- Haarlem, Netherland

PROJECTS ;

Hamaca Crude Upgrader Project (Caracas, Venuezuela)

Tengischevroil Assets Development Project (Khasakhstan, Russia)

Total Final Elf E & P Congo (FPSO) Floating Platform Storage and Off-loading Unit (Africa)

Jubail United Petrochemical Co. (Jubail, Saudi, Arabia)

Conoco Philips Billings Refinery, Ultra Low Sulphur Diesel Project (USA)

Conoco Phillips Zweeny Refinery, Ultra Low Sulphur Diesel Project (USA)

All of the above projects are work share related projects from various Fluor Daniel offices, directly delegating with my counter part overseas.

I was principally involved in the complete detail design engineering of the various process units. During design phase all changes in the feed phase and concerns are coordinated with my foreign counter-part as part of day-to-day activity and intra-discipline to make sure in accordance with project quality requirements and project schedule.

Having own areas of responsibility I was involved in process and utility piping PDS modeling, checking of deliverables/isometrics to comply with quality and materials specs.

Assist newly hired designers of their outstanding queries

OFFSHORE- FPSO, Front End Engineering Design (FEED) to Detail Design Engineering-

Total Final Elf E & P Congo (FPSO) Floating Platform Storage and Off-loading Unit- I was principally involved in the design piping layout of the high pressure compressor / scrubber units, check of all deliverables prior to issuance to make sure the quality and project requirements are met. In compliance with the schedule I constantly monitor the project requirements and discuss all concerns and changes with my counterpart overseas.

PARSONS INTERNATIONAL LIMITED

Buendia, Makati City, Philippines

Period - Nov. 10, 1997 – Oct. 27, 2000

POSITION – SENIOR DESIGN ENGINEER TO PRINCIPAL ENGINEER

De-bottlenecking project-Detailed Design Engineering of Columbia Carbon Phil. Inc. (CCPI), this includes site survey, interpreting pipe stress result in coordination with structural group with regards to pipe supports.

Front End Engineering Design(FEED) to detail design engineering of all Gizan and Farasan Military POL Storage Depot Facilities (Petroleum, Oil and Lubricant), and related facilities like; Tanker Loading and Unloading at facility, Tank Truck Filling / Unloading Stations, Mechanical utilities detail design for HVAC, plumbing, and fire protection, IDC-checker of Mechanical Utilities

Developed process piping specifications of all the POL for this project as part of the FEED.

Above projects, I am responsible in the preparation of all BOD (Basis of Design), performance specifications, design analysis, and materials specifications for all POL related design items.

In the above projects, acted as Discipline Lead / Lead Engineer / CAD Designer / intra-discipline checker of infrastructure and architectural planning design items, and intra-discipline coordinator during intra-discipline review

Proposed Shell Terminal project (JOCASP- Joint Oil Companies Aviation Supply Plant) at NAIA airport.

Above project, I am responsible in the preparation of the piping conceptual design including quantification estimate for the facility and pipe line routing including valve boxes locations as required.

J & S CONSULTANCY SERVICES CO. INC.

Consultant of Mitsubishi Heavy Industries (MHI)

Period - July 21, 1997 – Nov. 10, 1997

POSITION – PIPING DESIGN ENGINEER

Detailed design engineering of Mechanical / Piping of BAPE Chemical Plant in Batangas and design layout of a new plant Lithium Bromide in Taiwan, consisting of tank farm, weighting / bottling facility, pumping stations, laboratory and pipe racks facilities.

SAUDI ARAMCO SHELL REFINERY COMPANY

formerly Petromin Shell Refinery Company, Jubail, Saudi Arabia

Period - MAR 19, 1993 – JUNE 18, 1997

POSITION - LEAD DESIGNER - PIPING / MECHANICAL

Design of various De-bottlenecking Plant Modification Projects, maintenance related works, pipe stressing and preparation of spring support data requisitions, technical project support and supervision of Saudi trainees

Recalculation of WHB furnace superheater tubes and outlet piping wall thickness and remaining life as per API RP 530 and inter-condenser shell thickness using ASME VIII DIV 1 standards.

In all of the above projects and responsibilities, gained the standard procedure in execution of in-housed engineering projects.

KING-WILKINSON (SAUDI ARABIA) LTD.

Al-Khobar, Saudi Arabia

Period - March 08, 1980 – Oct. 12, 1992

POSITION- PIPING / MECHANICAL DESIGN SPECIALIST

Assigned to Various Projects in Petromin Shell Refinery Co..

(now Saudi Aramco Shell Refinery Company, SASREF)

As Mechanical / Piping Design Specialist, acting as project engineer in the absence of PE, in charge of De-bottlenecking Project such as Treater Modular Merox Unit, Net Gas Hydrocarbon Recovery System, Chiller for CFN rundown, Platformer, Hydrocracker, Visbreaker and other refinery wide revamp projects.

As project Technical Support Designer, I was principally involved in preparing of the Front End Design Engineering which includes scope of work, technical specifications for bid tender. including study of proposed locations of all new major equipment, i.e. compressors, modules, chiller, pumps, exchangers, reactor, etc. also included are the preparation of basic data sheets for instruments, pumps, static equipment and necessary existing drawings in delegation with other disciplines.

Assist bidders in the familiarization of the new locations of the new equipments, tie-ins vicinity, etc., and response to queries during bidding phase including counter estimate.

During design stage, assist / checking of the design of engineering contractor in delegation with other discipline. Response to queries, checking the design and material requirements and alternative materials to make sure in accordance with the design practices of Shell International and Petromin standards.

During major refinery shutdown, conducts / check tie-ins locations and involved in the monitor of works to make sure tie-in shutdown related works can be met. Involved in the coordination / assistance during the construction phase and answer queries of the contractor and reporting to the project engineer and project manager. Discuss / study occurring problems during construction with operations, area engineer and construction contractor which includes outstanding work.

DEBOTTLENECKING PROJECTS (IN-HOUSE DESIGN ENGINEERING)

Modifications of Blending Headers Stations, Cooling Water System, Relief / Flare System, Increase Butane Recovery System, Turbine Inlet / Outlet Piping stressing, Recovery of Naptha and more Project Modification Development Request (PMDR), includes project technical support.

In all of the above projects, I am intensively involved in pipe stress analysis by computer “Simplexs” and Caesar II” software. These includes 24” / 30” flare headers cross-over, stress-strain sensitive equipment, piping at columns, vessels, exchangers etc.

Responsible for the checking of the design / drafting of draftsmen, checked materials requirements, i.e. availability / alternative materials. Assist material department for alternative materials proposed by suppliers in delegating with accepting party QC / Inspector.

ARAMCO PROJECTS (DHAHRAN ENGINEERING BUILDING)

POSITION- MECHANICAL / PIPING DESIGNER SPECIALIST

Assigned to East / West Pipeline Expansion Project. Involved in project technical support, design and checking of piping, electrical, civil structural and instrumentation drawings designed by Fluor Arabia in coordination with Aramco Project Management Team (APMT) in pump stations project site, including preparation of critical piping and safety instruction data sheets.

POSITION- MECHANICAL / PIPING DESIGNER SPECIALIST ( IN- HOUSE PROJECTS)

Assigned to various projects as follows:

Iraqi Pipeline to Saudi Arabia Project (IPSA), Khuf Gas Increment II Project, Safaniyah Offshore Project, HVAC for control room 323 & workshop / warehouse and canteen at Aramco Ras Tanura Refinery complex, Pipeline Upgrade 1982 and 1983, design (relocation of 56” and 48” launchers for QRT pipelines (Aramco- Abqaiq assignment), Berri / Qatif flowlines with its Christmas trees, PIG launchers / receivers, LPG phase I and II in Ras Tanura Refinery.

In all the above projects, gained experience in pipe stress analysis by Aramco “Triflex” computer method. Example of work is the Safaniyah six well offshore production and test header, and some fin-fan exchanger headers, gained valuable Aramco Design Practices and Standards.

NON-ARAMCO PROJECTS

POSITION- MECHANICAL / HVAC DESIGN SPECIALIST

These projects includes SCECO substation in different locations, Royal Saudi Air Force Base Facilities like Communication Centers, Ammunition Warehouses, etc., National Commercial Banks in different locations, Sadaf Housing Project-Jubail (Al-Hamdan Consulting assignment), Kanoo Complex (Jubail).

In all of these project, gained valuable experiences in the design calculations, detailed design drawings associated with HVAC installations.

ENGINEERING EQUIPMENT INCORPORATED (EEI)

Vergara St., Mandaluyong City, Philippines

Period - 1979 - 1980

POSITION - SR. MECHANICAL DESIGN DRAFTSMAN

PROJECT AS FOLLOWS

Bataan Refinery Project - detailed design, checking, estimate, survey / as-built of APS II project and prepare piping plans and isometrics in coordination / consultation with Japan Gasoline Corporation (JGC).

Benguet Consolidated Mining Project - detailed design, plan checking, materials estimate of mechanical / structural for mining equipments, including the detailed fabrication/erection drawing.

EEI Foundry plant - detailed design, plan checking, estimate of all mechanical /structural works included in the detailed fabrication.

In all of these projects included, is to give assistance to fabricator at EEI fabrication shop incase problems occurs during fabrication and reporting to the supervisor.

TRIDENT ENGINEERING COMPANY INCORPORATED

No. 70 7th Street, Caloocan City, Philippines

(an Air Conditioning and Refrigeration Design Engineering and Contractor)

POSITION - APPLICATION ENGINEERING SUPERVISOR

Assigned to various projects as follows:

Puerto Azul Project (Cavite), UPCBA project (UP Diliman, Quezon city). Goldilocks projects, San Miguel building (Makati), Mapua library, Gentex (Pasig), etc.

In all of these projects included is the estimate for competitive bid, visits materials supplier for materials quotations like electrical materials, ductworks, A/C equipments and accessories, includes cooling load estimates, design drawings and assist fabricators.

Fully responsible for the designing / securing Mechanical and Electrical drawings for Permits to Operate purposes in various government agencies and to make sure permits availability on site on start-up.

PYRAMID CONSTRUCTION & ENGINEERING CO. INC.

Delta Bldg., West Ave., Quezon City, Philippines

Period - 1973 - 1975

POSITION - FIELD ELECTRICAL DRAFTSMAN

Assigned to various projects as follows :

Electrical Layout of various occupancies and housing projects, like Lake Caliraya Pavillon and Cottage (Laguna), Polaris condominium (Makati) including site visit in coordination with city inspectors. Included is the survey / as-built of electrical works of various buildings like.

VARIOUS TRAININGS COMPLETED:

1. Ceasar II Pipe Stress(Saudi Aramco Shell Refinery Company)

2. Basic Pipe Stress (Fluor Daniel Inc. Phil.)

3. Piping Materials Engineering ( Fluor Daniel Inc. Phil. )

4. Icarus / AspenTech Estimates ( Fluor Daniel Inc. Phil.)

5. Piping Material Control,MATMAN, ( Fluor Daniel Inc. Phil.)

6. Supervisory Awareness Training ( Fluor Daniel Inc. Phil.)

7. Supervisory Skill (Parsons)

8. Microstation 1995 ( Parsons)

9. Smart Process & Instrumentation

10. PDS Modeling ( Fluor Daniel Inc. Phil.)

11. Designer Enhancement Training (Fluor Daniel Inc. Phil.)

12. Quality Improvement Process (Parsons)

13. QC / Checking Procedure

14. Citrix Manpower Training- (Technip)

15. Lean Six Sigma- Yellow Belt Project Implementation Guide- Technip

Contact this candidate