Medical Operator

Jaime D. Jimenez

*** ******** **. ***.# **

Sunnyvale Ca. 94086

Mobile Tel. # 408-***-****

Email: *********@*****.***

OBJECTIVE: I am seeking a challenging career in a high end Technical / Manufacturing area,

Medical Device and Laboratories position where I can use my extensive preexisting

skills for growth opportunity or advancement.

WORK SUMMARY

I have Completed all Course Program in total Quality Management

• Statistical Process Control

• Total Productive Maintenance

• Quality Improvement Team

• Mfg. GMP Training

EXPERIENCE:

5/14 – 4/15 Adecco Agency: Google Company Mt. View Ca

Mfg. production assembly lead in LoonFlight department

• Performed mechanical Payload assembly.

• Perfomed assembly and testing.

• Apex Board

• Sensornode board

• Franz units

• Create production procedures

•Team player to meet production goals.

•Report and collaborates with supervisor on any process or personnel issues.

•Performed moderately complex trouble shooting.

•Dismantle, adjust, repair and assembles equipments according to layout plans, blue prints,

operating or repair manuals, rough sketches or drawing.

•Use test and diagnostic equipment to perform moderately complex checkouts.

•Rebuild manufacturing equipment and product.

•Perform equipment modifications.

•Assist Quality and Training Tech in developing and enhancing procedures.

5/13 –5/14 Adecco Agency: Google Company Mt. View Ca.

Mfg. Clean room Technician Google Glass

• Performed routine calibration, diagnostic check on automated system, monitoring automated

system., isolate/troubleshoot problems and perform repairs to ensure system is in working

condition.

•Calibrated LCOS alignment and adjust focus lenses for Google glass.

• Aid with installation of equipment and configured robotics equipment to adjust robot

performance and minimize defects.

• Set –up and test equipment to ensure that is function properly. In addition, operate

equipment to demonstrate proper use and to analyze malfunction.

• Maintain equipment logs, repairs calibration and test.

• Calibrate testing instrument and installed or repaired equipment to prescribed specifications.

• Advise supervisor/engineer regarding product performance, and suggestions for product

improvements.

• Have operation knowledge of the process in the three major areas such as Processing and

Packaging.

• Participates as team member and understand principles used in the facility’s continuous

improvement initiatives.

• Report and collaborates with supervisor on any process or personnel issues.

• Provide good communication of maintenance activities to following shifts and provide

assistance.

04/05 – 03/13 Abbott Diagnostic Hematology Business Units. Santa Clara Ca.

Mfg. Prep Technician in Laboratory.

• Responsible for Mfg. Lab.

• In charge of Safety Coordinator.

• In charge of in house Material supply.

• Processing RBC, WBC, PLT Component and formulation of Calibration and Control

Product for Cell-Dyn Hematology system under established procedures.

• Posses Knowledge of Lab Instrument as (pH Meter, conductivity, glucose, osmolarity,

centrifuges, Pipettes, measure and experience with Aseptic processing techniques.

• Team player to meet daily production and department goals.

Mfg. Reagent Operator.

• Performed mfg. Line Clearance, MPI, BPr’s and Batch Data Sheet.

• Performed set up and vision system.

• Operated Omega Bottle Sorter for 1Gal, 500mL and 250mL bottles.

• Operated Serac Cubie filler for 20L, 10L and 4L.

• Operated Moen box former machine / Klippenstein box sealer.

• Operated Clark Automation Plastic Bladder inflator for 20L and 10L.

• Operated Accraply and Zebra Label-Aire printers.

• Operated National Filler and National Labeler for Blood and Die solution.

• Operated Sam Filler for Enzymatic and Retic die solution.

• Operated RMT Eng. Robotic Palletizer and Orion Shrink wrapper.

• In charge of Machine Calibration.

Mfg. Instrument Assembly Operators

• Assembled Clinical Cell-Dyn Instrument.

• Assembled Clinical Ruby Instrument.

• Assembled Clinical Sapphire Instrument.

• Mfg. Packaging

Auto Clave and Glassware Washer Technician

• Operated Griton Washer machine.

• Operated Amsco Autoclave

• Operated Steris Autoclave

• Autoclaved clinical tools

• Autoclaved Laboratory tooling and materials.

03/98-10/03 Lifescan Cardiovascular& Glucose Business Unit. Milpitas Ca.

Mfg. Production Lead in Medical Devices.

• Responsible for Mfg. Assembly and Test Areas.

• Trained New Operators in Process and Procedures.

• GMP & FDA Complete Training.

• Certified Trainer (OJT) Onsite Job Trainer

• Verify and Coordinate Inventory prior to Line Start Up.

• Inventory Management Cycle counts and work orders.

• Read and Interpret Documentation.

• Quality Inspection Meter and test Strips for Glucose.

• Monitoring Glucose in blood.

• Pilot production of test Strips for Medical product device for testing blood coagulation.

• Meter Assembler for Medical product device for testing blood coagulation.

• Support a new Launch Product.

• Certified Assembler Operator for the following Meter Devices:

1. One Touch Meter 3. Ultra Smart Meter

2. Sure Step Meter 4. Harmony Meter for Cardio Vascular

10/00-08/01 Micrel Semiconductor Company. San Jose Ca.

Mfg. Production Lead in Test Area.

• Responsible for Mfg. Production in Test Area and wafer fab production line.

• Machine Test Operator.

• In charge of test system.

• Coordinate Line Staffing.

• Certified for all test system. Advantest, Multi test handler, TMT test system and

Rasco handler.

05/00-10/00 Electronics’ International. San Jose Ca.

Mechanical Test and Assembly Operator in PCB.

• Responsible for testing, download, functional test/RPS, Run in and Verification,

Configuration, Post test and Pack out of various electronics products.

• Responsible for training new assemblers and test operators.

• Supply parts in line.

• Monitor for all rejected parts

01/95-12/97 Akashic Memories. Milpitas Ca.

Process Technician in Hard disk

• Trained new Operators in Processes and Procedures.

• Tracked Quality Control and Total Procedures.

• Manufacturing Specialist 2.

• Polish Machine Operator

• Certified on Heat Treat Process/ Clean room operating procedures.

EDUCATION: 05/95 High School Diplomas, Willow Glen High School.

2004 Medical Assisting Bryman College.

PERSONAL SKILLS:

• Detailed Oriented

Self Motivated

• Professional

• Quality Oriented

• Team Player

• Hard Worker and very friendly.

COMPUTER SKILLS:

• •

Microsoft Excel 10 key by touch

• Microsoft Word

REFERENCE: Available Upon Request

Jaime D. Jimenez

888 Tamarack Ln. Apt.# 69

Sunnyvale Ca. 94086

Mobile Tel. # 408-***-****

Email: *********@*****.***

Dear Potential Employer,

I am seeking a position in a high end Technical / Manufacturing area and Laboratory or

Medical Device position in production area. I have many years of experience as an operator

and Technician job. I have worked from PCB level components to mechanical assembly,

functional test, ICT box builds, Test area, Stockroom in shipping and receiving, also in

Medical device as well. I also have worked my way up as an operator then got promoted to

production technician and production lead of a manufacturing team.

At this point in my career, I would do well in manufacturing in test area, medical device and medical

laboratories or in any assembly in production line.

Even though most of my work experience has resolved around the electronic industry and medical

devices, I am not limiting my self to that field of work, and would be interested in pursuing other

opportunities if they present themselves.

I work well under pressure and have excellent communication skills. I am willing to take charge

beyond expectations and ensure team performance. I am accurate and detailed and I believe my

dedicated attitude, as my years of experience would be asset to your organization.

Sincerely

Jaime D. Jimenez

Recent Job Address

05/04 Present Mfg. Prep Technicians in Laboratory and Safety Coordinator.

Abbott Laboratories Hematology Business Unit

5440 Patrick Henry Drive.

Santa Clara CA. 95035

Aniket Patel 408-***-****

Tran Vo 408-***-****

03/98 – 10/03 Mfg. Production Lead in Medical Devices

Lifescan Cardiovascular Business Unit.

1000 Gibraltar Drive.

Milpitas Ca. 95035

Tim Lam 1-510-***-****

10/00 – 08/01 Mfg. Production Lead in Test Area

Micrel Semiconductor

1849 Fortune Drive

San Jose Ca. 95131

Hudson Afalla 408-***-****

05/00 – 10/00 Mechanical Test Operator in PCB

Electronics’ International

1701 Fortune Drive

San Jose Ca. 95131

Randy Saetern 408-***-**** / Edwin Paballa 408-***-****

Verification of Address

1681 Curtner Ave.

San Jose Ca. 95125

118 Lochinvar Ave. Apt. # 113

Santa Clara Ca. 95054

3383 Vincent Dr.

Santa Clara Ca. 95054

888 Tamarack LN. Apt. # 69

Sunnyvale Ca. 94086

Contact this candidate