Quality Inspection

Dwayne D. Downer

***** ******** ******* ***** ******* Township, MI 48038 586-***-**** ********@***.***

Objective: To obtain a direct hire Quality Inspector related position utilizing my instructing abilities, work experiences, education, problem solving and computer skills that will allow me to grow, meet company goals, save cost, demonstrate my hard work, great work-ethic, self-motivation, positive attitude and to be a valuable asset and team player to the company.

Education:

Bachelor of Science Engineering Technology Central Michigan University Mt. Pleasant, MI

Major: Electrical Electronics Engineering 05/1998

Professional Certification:

Lean Manufacturing Training MMTC Lean Principles

FARO ARM Certification FARO Technologies

FARO Laser Tracker Certification FARO Technologies

Certified Workforce Development Professional NAWDP

Michigan Department of Education Substitute Teacher Permit.

Passed Michigan Test for Teaching Certification (MTTC)

Summary of Qualifications:

Experienced professional in a variety of environments that consists of: manufacturing, automotive, quality engineering, material trace ability coordinating, supervision, instructor, technical writing, parts analyst, etc.

Focused engineer with quality and manufacturing environment experience utilizing, ISO 9001, AS-9100, QS 9000, PPAP, SPC, APQP, 8D, PFEMA, TS16949, GD&T, etc.

Initializing problem-solving skills, for example issuing quality alert documentations, catching a miscalculation with the inventory saving the company thousands of dollars, locating an error and bring it to the forefront, and correctively measuring a product and creating corrective actions on how to prevent it from reoccurring.

Knowledge with quality control and customer/supplier interaction.

Successfully initiated internal audits ISO/QS 9001/TS16949 documentation.

Experienced Instructor professional in teaching mathematics, automotive, manufacturing and quality control. Instructed 400+ students in metrology, blueprint reading, using and reading measuring devices such as the Micrometer, Dial Caliper and Vernier Micrometer and Geometric Dimensioning and Tolerance (GD&T).

Tutored 40+ students while attending high school in mathematic courses such as: algebra, arithmetic, conversions (standard & metric), decimals, fractions, geometry, trigonometry pre-calculus, statistics, etc.

Tutored 100+ students after hour in mathematics while working at the Detroit Manufacturing Training Center.

Consulted and Developed Entry-Level Electronics Program for Biomedical Equipment by researching basic electronic schematics, concepts, components and safety regulations, etc.

Instructed 100+ students in Basic Computer Operations and Applications which consist of computer hardware and using Windows, Microsoft Office Suite-Excel, Word, Power Point, etc.

Instructional/Teaching Qualities:

Algebra>Basic Math>Concepts>Direct Numbers>Geometry>Graphic Math>Trigonometry> Pre-Calculus>Probability and Statistics etc.

Basic Computer Operations and Applications which consist of computer hardware and using Windows, Microsoft Office Suite-Excel, Word, Power Point,

K-12 grade with Math, Language Arts, Science, Social Studies, Spanish, Drama, Music, Art, Physical Education/Heath and even Special Ed students, etc.

(con’t) Page 2

Dwayne D. Downer

15575 Lakeside Village Dr Clinton Township, MI 48038 586-***-**** ********@***.***

Work History:

2013-2014 Quality Inspector Allegiance Staffing-Anderson Cook Corp Clinton Township, MI

Inspect power transmission components: power train, drivelines, sub-assembly components, splines and thread rolling tooling that are manufactured from CNC machining equipment.

Maintain and formalize programs in SPC, Preventative Maintenance, Continuous Improvement, Cost of Quality, Advance Quality Planning, FMEA, and Process Control Plans, PPAP layouts and Final Audit Inspections.

Inspect the components using micrometers, height gages, run out gages, comparators, calipers, dial indicators and computer operated measuring devices, blueprint reading, etc.

2011-2013 Teacher/Teacher Assistant/Math Tutor Catherine Ferguson Academy Detroit, MI

Evans Solutions, Inc.

Instructed Secondary Mathematics grades 9-12 in Algebra, Geometry, Trigonometry, and Statistics.

Proctored the MEAP Testing to over 30 9th and 10th graders in Fall Semester of 2011.

Substituted Classes for Teachers who were absent while working as a Teacher Assistant.

Instructed Algebra 1, Pre-Algebra, and a 12 grade Senior Math Class during the 2011-2012 School Year.

Tutored over 100 students in the subjects Algebra 1&2, Geometry 1&2, Algebra 3&4 and Statistics 1&2.

Developed and Conducted a Math Tutorial class and Secondary Math Assistance Course.

Advisory for over 16 students during the Fall Semester of 2012.

2010-Present Substitute Teacher Substitute & Teaching Specialist, LLC Sterling Heights, MI

Instructed students K-12 grade with Math, Language Arts, Science, Social Studies, Spanish, Drama, Music, Art, Physical Education/Heath and Special Ed students.

Taught at 12 different academy schools and high schools in Macomb & Wayne County.

Reported to the school principal or designee upon arrival at the school building

Reviewed with principals, department heads of all lesson plans and schedules to be followed during the teaching day.

Maintained established routines and procedures for the schools and classrooms that was assigned.

Consulted with principles before initializing any teaching and other procedures not specified by an absent teacher or lesson plan provided.

Oversaw student's behavior in class and during lunch and recess periods.

Notified the school office/principal to handle all matters regarding discipline or behavior problems or issues.

Reported in writing daily class lessons, activities and behavior issues at the conclusion of each teaching day for teachers returning from absence.

Followed all policies, rules and procedures which were applicable to teachers.

(con’t) Page 3

Dwayne D. Downer

15575 Lakeside Village Dr Clinton Township, MI 48038 586-***-**** ********@***.***

09/2007-01/2010Quality Engineer/Material Traceability Coordinator W-Industries Detroit, MI

Audited Material Lot Control Trace ability. Performed Quality Inspections on Military/Defense vehicles, components, industrial parts, and aerospace components using calipers, micrometers devices. Issued work instructions and inspections as needed. Initiated and coordinated required PPAP.

Saved the company cost with inventory, improved cost of quality. Met customer requirements.

Initiated internal audits ISO/QS 9001/TS16949. Performed Brinnell Hardness testing. Obtained knowledge with 8-D root cause analysis. APQP (Advanced Product Quality Planning) and PFEMA as required. Issued quality alerts and corrective actions.

Read and interpreted blueprints and utilized Microsoft Excel to input actual measurements and data into quality database. Interacted with Quality Managers, Project Managers, Source Inspectors and Customers that involved First Article Inspections, reports and Final buy offs.

Developed Process Flow Charts and generated Process Sheets using Microsoft Excel.

Utilized, interpreted and reported statistical data using SPC (Statistical Process Control). Successfully monitored and stamped the shipments of project shippers, took photos, and verified inspections to ensure quality and delivery.

10/2003-08/2007 Instructor Detroit Manufacturing Training Center Detroit, MI

Trained

1000+ Workforce Development, Workforce Investment Act, and Michigan Rehabilitated Service recipients in the Entry-level Automotive Manufacturing Industry and the various skills that are required.

400+ students in Metal Stamping operations, inspection procedures, basic concepts, and safety rules and regulations that is required through Michigan Industrial Occupational Safety Health Administration (MIOSHA) and the Occupational Safety Health Administration (OSHA).

400+ students in Injection Molding operations, basic concepts, Inspection procedures, properties of plastics and basic terminologies that are used in the workplace along with safety rules and regulations.

50+ students for in Production Assembly which consist of car seats assembly and Blow Molding gas tank assembly, Statistical Processing Control (SPC), International Standards Organization (ISO-9000) and Quality Systems (QS-9000).

Instructed

400+ students in the areas of Metrology, Quality Control, Blueprint reading and reading measuring devices such as the Micrometer, Dial Caliper, and Vernier Micrometer in standard and Metric units including GD&T.

100+ students in Basic Computer Operations and Applications, which consist of computer hardware and using Windows XP, Microsoft Word and Excel.

Assisted in Tutoring

40+ students after hour in Mathematics.

Consulted and Developed

An Entry-Level Electronics Program for Biomedical Equipment by researching Basic Electronic Schematics, Concepts, Components and Safety Regulations, etc.

(con’t) Page 4

Dwayne D. Downer

15575 Lakeside Village Dr. Clinton Township, Michigan 48038 586-***-**** ********@***.***

01/2002-01/2003 Dako Group (Volkswagen) Parts Analyst Auburn Hills, MI

Administered monthly presentations concerning parts to an average of 50 employees.

Developed presentations and documentations using Microsoft Excel and Power Point.

Analyzed an average of 200 Window regulator Warranty Claims daily.

Analyzed and tested an average of 300 Ignition Coils. Interpreted and analyzed AutoCAD blueprints of automotive components.

Allocated radios to Volkswagen dealerships across the country.

10/2000-08/2001 SPX Valley Forge, Inc. Technical Author/Technical Writing Southfield, MI

Initiated Diagnostics development for headlights, chassis, power train, body, taillights and trailer tows using AutoCAD tools. (Chrysler and GM)

Logged in and analyzed new incoming automotive electrical harness wiring blueprints.

Met deadlines producing high quality, technically accurate customer wiring diagram manuals.

09/1999-10/2000 Action Data, Inc. Supervisor/Management-Data Entry Southfield, MI

Processed an average of 900 Marriage Licenses and Death Certificates for the State of Michigan, medical vaccine records, bank records, and OEM documents.

Supervised and performed payroll, attendance documentation and distributed paychecks to 25-30 employees for morning and afternoon shifts.

Engineering/Manufacturing Qualities:

AC/DC circuit analyst theory Assembly Automotive parts APQP Blueprint Reading Digital Electronics Diagnostic Development GD&T HVAC ECAD (Electrical Schematics) Injection Molding Power train Systems Electrical Components and Controls Harness Wiring Diagrams Inventory ISO-9001/AS-9100 Material Handling Metal Stamping

SPC TS16949 Parts Programming Printed Circuit Board (PCB) Layout Program Logic Control Quality Systems-9000 PPAP Warranty Testing Analyst Testing Systems

Computer Skills:

AutoCAD-14 Web Based Programming Catia V5 FOR-TRAN Graphics LAN ID Lotus Notes Microsoft Access Microsoft Excel Microsoft Outlook Microsoft Power Point Microsoft Word Window 95, 98, 00, NT, XP TCP/IP Software Unix Systems

Contact this candidate