Engineer Design

HARRY LEE RENSHAW III

***** ******* ***** ****

Richmond, TX 77407

Cell Phone 832-***-****

email: *********@*******.***

CAREER SUMMARY

Proven and well-rounded Senior Designer in product development and manufacturing of Automotive, Aerospace, Heavy Duty Truck, Marine and Oil & Gas design. Experience designing products from concept to product launch and have personally performed each stage of design and manufacturing.

EDUCATION

Western Michigan - B.S.M.E. 3.4 GPA

Calhoun Area Vocational Center - Ag. Mech. 4.GPA

TECHNICAL SKILLS

UG NX 8.5, Team Center, Solid Edge V20, PLM, PDM, Agile, OBMS, SAP, Solid Works 2009,

5S, Pro-E Wildfire 4.0, Six Sigma Black Belt, AutoCAD 2010, Alias 2010, Catia V5, Enovia V6, Navisworks

EMPLOYMENT

SBM Atlantic Offshore Houston, TX Jan 2012-present

Design Engineer

Development Floating Production Storage and Offloading (FPSO) single torrent mooring systems and detachable buoy system using UG NX version 8.5 Cad System.

Design of specific swivels, bell / stinger combination, flexible joint and various support systems.

Layout for Front End Engineering Design (FEED) studies, down pipe construction and routing along with swivel sizing for flow and pressure consisting of detail drawing of components and BOM for associated parts.

Design of hydraulic and electrical detachable Stab Plates and Boarding Valve Riser spools, pump installations.

Design of sheet metal and weldments for structural bracing and function operations with 4x safety factor.

Create order drawing for machined parts, casting and forging allowing for shrink and warpage of various materials, required material spec and start of applicable GD&T for items and assemblies per ASME Y14.5.

Verification of components for operational requirements, material spec, volume, flow, extraction equipment and clearance for installation and removal and attachment schemes to meet safety factor..

Recaro Seating Group, Fort Worth, TX June 2011- Jan 2012

Project Engineer

Generate project scheduling, allocation of design resources, coordination of design engineer activities, providing supervisory guidance to team members using Catia V5 Cad System.

Ensure work done meets company’s expectations and timing by providing timelines and quotes along with documented progress report for each phase of design and engineering on assigned programs.

Development of seat frame to cross over track break area to allow additional first class seating and reconfiguration of layout to meet specs.

Verify designs meet industry standard and company guideline by monitoring and controlling technical activities for design projects.

BE Aerospace, Winston Salem, NC Jan 2011- June 2011

Design Engineer / Certification Engineer - 6 mo contract position

Design and engineering support on multiple configurations of Pinnacle programs from tripe to quad configuration.

Development of bezel for video monitor installation and blank out for non-monitor seats at exits.

Certification Engineer for Flammability Group and ECS requirements across all seating product lines.

Created BOM’s and ECN’s using Agile system.

Released parts thru all phase of design from S10 thru S40 (production release) within Team Center and update ECO’s from CDR review and FEA results. NX 7.5 Cad System.

GE Aero and Energy Houston, TX March 2010-Jan 2011

Design Engineer – 9 mo contract position

Design and engineering support on turbines, skids, heat exchangers, tube and electrical routing, filter systems, water/air water/fuel mixture systems, supporting sheet metal and weldments.

Casting design 3-d math and machining drawing for bearing housing, turbos and inter coolers using UG NX 7.0.

BOM construction and maintenance on large assemblies for power generators systems, system layouts and asm interference analysis.

FMC Technologies, Houston, TX Dec 2009-March 2010

Design Engineer

Mechanical components, electrical routing and assemblies for subsea controls and ROV pickup attachments.

Usage of NX6 for 3D math data, drawing documentation and production release thru Team Center usage

Brunswick Corp, Merritt Island, FL Aug 2008 - Dec 2009

Propulsion Design Eng. – 6 mo renewable contract position

Engineering for yacht group on multiple drives ( in-line, V-drive, Zeus ).

Design support for hose routing, holding tanks for potable / fresh water systems and power generation systems using UG NX4/Teamcenter per SME standard for both US and European standards for Naval dertification.

Design lead on math data and installation drawing on interceptor, junction box, wire harness and antenna for electric trim tabs, strainers for intake and seacock pickup for engine cooling system and water management.

Structural development for stringers and hull.

Completion of documentation of Naval certification with applicable spec and dimensional requirements.

Goodrich, Colorado Springs, CO / Mexicali, Mexico Jan 2008 - Aug 2008

Design Engineer / Program Coordinator- 6 mo contract position

Coordinate outsourcing of upholstery, sheet metal, vacuum form and injection molded plastic work load to suppliers for seating division.

Redesign various components to improve appearance of product line.

Develop new suppliers for sub-component to reduce cost and improve timing.

Updated drawing standards to meet both Goodrich’s and manufactures needs using NX4/NX5.

BE Aerospace, Miami, FL Jan 2007- Jan 2008

Design Engineer - 1 yr contract position

Responsible for design completion of Super First Class Lay Flat sleeper seat configuration.

Redesigned seat structure from PDR, CDR and FEA reviews, for 16G cert testing and safety review compliances. Ensure plane meets ECS flammability requirement for cabin interior.

Redesigned sheet metal shrouds, upper and lower consoles substrate, console show surface panels and mounting brackets to allow electrical power boxes in floor to be moved under seat for faster service and installation. Design of sheet metal panel and bracket for enclosures.

Reroute wiring for power supply and controllers.

New Flyer Industries, Winnipeg, MB Canada Sept 2006- Jan 2007

Mechanical Engineer - 6 mo contract position

Design and Engineering support for electrical harness, camera provisions, power supply systems, interior sheet metal panels and trims.

Generated 3D math and drawings for sheet metal components within the engine and interior compartment area, BOM”s using NX3., Team Center and PDM.

Motor Coach Industries, Winnipeg, MB Canada Jan 2005- Sept 2006

Mechanical Engineer - 9 mo contract position

Engineering and design support on 2007 Low Sulfur engine change over (Cat, Cummins and Detroit Diesel).

Using NX3, Sketcher, NX sheet metal, Free Form.

Created common wire harness for main power supplies, starters and generators.

Standardized battery packs, electrical attachments and roof structures.

Created 3D math and drawing for turbo, heater/cooling systems, exhaust tubing, surge tanks, fan blades, fan drive, fan shroud, radiator core, engine cooling lines, air intake box, water manifolds, motor mounts and booster pumps.

Cooper/Standard Rochester Hills, MI Apr 2001- Jan 2005

Senior Designer

Knowledge base allowed design of several vehicle programs in vastly reduced lead time; while also improving margins on multiple programs from under 5% to over 50%, using plastic and new design concepts. Introduced and designed plastic appliqués and other components into CSA’s sealing system.

New product designs which I personally introduced, enabled CSA to be awarded over $236 millions in new contracts.

Letter written to GM purchasing regarding BIW development realized $8 millions in credits toward future give backs that lead CSA to be awarded the GMT900 program -$210 million contract.

Established new door sag criteria that allowed door gaps to be reduced and be completive with foreign suppliers.

Verification of design thru 6 Sigma process, DFMEA’s to allow issue of ATP for pro-type builds and ECO”s for production release.

GenCorp VS Division Detroit, MI May 1997- Apr 2001

Design Supervisor

Lead design pool that created surfaces on molded details for the weather strips, exterior trim panels and interior trim on GM and Ford programs.

Redesign of several components and installation methods that created over 10 million in cost savings directly to GenCorp.

Provided criteria to BIW group for door and side body development and GD&T scheme proposal.

Maintained BOM’s, ECO’s, DFMEA’s, 8D’s, RFQ’s, ATP’s. Coordinator and design leader on brain storming, cost cutting and root cause activities.

Create master section for seal extrusion to reduce cost and standardized product line across platforms.

C.E.T. Warren, MI 1994-1997

Senior Designer /Coordinator

Follow up engineer and product designer on various trim components and body panels (sheet metal and plastic.

Generated product surfaces using freeform features and solid molding exterior panels, interior panels and interior trim for door panels, center console and IP’s

Redesigned product to simply tooling and reduce timing.

Arc Industries Sterling, Heights, MI 1990-1994

Senior Designer

Product designs, mold design, stamping die design and NC programming of injection molds and stamping dies for various interior trim and exterior trim panels using CGS, UG and GMCUT.

Create math data from scans and sketches.

Pioneer Engineering Warren, MI 1987-1990

Senior Designer

Responsible for technical support and surfacing development training on Unigraphics.

Setup checking procedures and usage to ensure surfaces generated met GM’s standards for interior trim and body panels.

Generation of 3-D math, cutter paths and certification data for NC checkrails and CMM data.

Set-up and implementation of a surface development group for N/C check rails and training programmers on surfacing and N/C programming using CGS and UG.

Created CMM data and wrote programs.

Surface development on various automotive components, design tooling for injection molding and stamping dies.

Worked with vendors resolving design, manufacturing, tooling and asm issues.

Contact this candidate