Project Electrical Engineer

R.NATARAJAN

(Senior Electrical Engineer)

Mobile.No: +60-169****** (Malaysia)

Office. No: +60-321**-****

E-mail: *.***********@*****.***,

Summary of Work Experience:

Project Engineering & Design: (PMC-EPC, EPCM) Professional in Design,

Engineering management. Specialist in Electrical, Instrumentation and

Control & Automation design engineering. Project feasibility study support.

Conceptual engineering development. Front end, basic and detailed design

including operations. Safety HAZOP, HAZID, SIL and Risk assessment.

Prepare/Review/Approval of project general technical requirements,

Electrical design basis, power system studies, analysis, calculations,

project drawings/documents. Final approved design documents dossiers and

handing over completion. Familiar with international codes & standards,

regulations such as API, IEC, IEEE, OES, DEP, BS, NEMP, NEFP, QES, NEC,

GOST, ESP, ESR, PUE, etc.

Project Management (PMC-EPC, EPCM): Review/approval design documents.

Prepare/Review of ITB/RFQ and Evaluating TBE/CBE for contractors/vendors

proposal. Participate Client workshop meeting/Kick off meeting, Monthly

Engineering/Progress management meetings. Contractors/Vendors Kick

off/clarification (Technical & Commercial) meetings coordinate with Multi

disciplines and support interface management for meeting and technical

issues with clients and contractors. Prepare/Review/Approval of Project

Quality Plan (PQP), ITP, Method of Statement, Testing Procedure and

Formats. Control and monitor Project Schedule, Budget and Performance.

Review and endorse contractor's invoices for payment.

Provide support to execute the Project Construction activities Erection,

Installation, Testing and commissioning; Start up activities as per

approved design documentation with Quality and Safety aspects. Follow

contractor progress and co-ordinate technical difficulties at site.Contract

completion support.

Multicultural experience having interacted with professionals globally from

Asia (Malaysia, India, Korea & China), Middle East Regions (Oman & Qatar),

Russia, USA, CIS & European countries. Projects like Energy, Oil & Gas

sector (Client's LUKOIL, OGC, IWPP / OPWP (DPC), RAECO, Shell, Reliance,

ONGC, NLC)

Academic / Professional Profile:

Bachelor of Engineering (Electrical & Electronics Engineering)

1st Class with Distinction

Annamalai University. Tamil Nadu, India.

Post Graduate Diploma in Project & Quality Management

1st Class

Annamalai University. Tamil Nadu, India.

Pursuing Master of Technology (Electrical & Electronics

Engineering)

Karnataka State University, India.

Professional affiliation:

> Member in IEEE & Associate Institute of Engineers India - Neyveli

Lignite Corporation, India

> Shell Approved as an "AEP". Certified Professional (ILM) Leadership

and Management, Shell, UK

> Asia Pacific Oil & Gas Association Member - Malaysia 2013.

Software Skills:

> Design Package E-TAP 12.0, Auto CADD, E-Plan, PDMS(3D Modelling),

Navis Viewer, MS-Visio, Intools, Electrical Soild works,etc,.

Thoroughly familiar with all MS Office Packages.

> Knowledge in WinPC's, SAP, Maximo. PCMS (Assets Management Software)

Career History:

1. Present Employer : KNM PROCESS SYSTEM SDN BHD (Malaysia)

Department : EPC Project Management. Functional

Segment: Project Engineering & Design

Position : Senior Electrical Engineer

Period : March 2012 to till.

A. Project / Client : EPCC Project for Booster Compressor Station

Khauzak / LUKOIL

(Lukoil Uzbekistan Operating

Company-LUOC).

During assignment, my responsibility is to handle but not limited to the

following,

> Provide value added Execution of Engineering & Design services within

budget and schedule.

> Review of FEED Documents prepared by FEED Consultant. Participate in

project Front End Engineering and Design (FEED) and develop detailed

design engineering.

> Coordinate Preparation of Request for Proposal/Quotation Invitation to

Bid (ITB-RFQ) for Sub Contractors/Vendors (ABB, Siemens,

GE/Converteam, Man Diesel & Toubro, ELIN, CCS, Schneider, Emerson,

Honeywell, Eriell, Injgeo etc.)

> Carry out/ Coordinate Technical Bid Clarification and Evaluation (TBE)

of bids and submit recommendation to Contracts Dept. to finalize

Commercial Bid evaluation (CBE).

> Participating Client workshop meeting/Kick off meeting, Monthly

Engineering/Progress management meetings. Contractors/Vendors Kick

off/clarification (Technical & Commercial) meetings.

> Reviewing and commenting of detailed design engineering of EPC

contractor documents. Performing engineering works including guiding,

reviewing and approving the work of specialized design Consultant and

EPIC Contractors. Following International code, Standards &

Regulations GOST, IEC, BS, NFPA, NEMP, API, PUE etc. Evolving

technical specifications and bid Documents.

> Review and comment of EPC documents and vendor packages like

Substation(EHV/HV/MV/LV - GIS,AIS), Overhead lines(110kV / 10kV),

Transformers, MV and LV switch board, UPS(AC & DC), Battery and

battery charger, Emergency generator, Protection relays, Lighting,

Lightning, Grounding, Cathodic protection, Electrical heat tracing,

Fire alarm/Fire Fighting-NN100,FM200, HVAC, Power cable etc.

Coordination with instruments team for DCS, ESD. CCTV, PAGA etc.

> Reviewing of Compressor vendor package including 3.3KV,10KV 12Pulse

and 24 pulse Variable Speed drive(VFD),VFD Transformer 3winding and 4

winding, lube oil and seal oil system, soft starter system air

compressor package, Instrument air compressor package etc. Power

system Analysis, Network Harmonic studies based on VFD system.

> Reviewing of Booster station Electrical works related to Compressor

Units, High voltage motor Condensate make and Pumping, Gas dehydration

and liquid dehydration etc. Coordinate with mechanical, rotating,

instrument for booster station complete work.

> Hazardous area classification & electrical equipment selection

criteria. Design of Electrical control and protection systems for

generation, transmission and distribution systems.

> Prepare/review/approve Instrumentation, Control and Automation

documents for sub-contractors, suppliers (CCS - DCS, ESD & IS system).

Prepare scope of deliverables IO List, Trip & Alarm List, Caution &

Effect Matrix. Instrument datasheet/specifications.

> Responsible for all aspects project engineering development,

implementation and coordination for discipline activities related to

the project.

> Report and record potential change order requests to assist in claims

avoidance. Change request/change order process as necessary. Check and

ensures that all construction work is completed in accordance with

approved standards consistent with contract specifications.

> Resolve in a timely manner field engineering issues and the other

interfaces. Provide technical input, and review of field change and

concession requests. Coordinate input from specialist in support of

technical design review and issue resolution, and recommend solutions

to top management. Participating Factory Acceptance Test (FAT) and

Site Acceptance Test (SAT). Management of project planning, design re-

engineering, enhancement, implementations and service support to oil

and gas and power sector.

> Provide technical and trouble -shooting support during commissioning and

start-up.

> Develop detailed inspection and testing procedure and ensure that

testing and certificate of equipment is carried out in compliance with

regulations.

1. Employer : MOTT MACDONALD & COMPANY (OMAN)

(MMC is one of the world's

foremost Multi disciplinary Engineering Consultancies for

Power, Petrochemical, Oil and Gas)

Department : EPC Project Management. Functional

Segment: Project Engineering & Design.

Position : Electrical Engineer - Projects

Period : April 2010 to March 2012.

A. Project / Client : EPC Project for Gas Supply to Barka Phase-III

&

Sohar Power Company Phase-II (4.85

MMSCMD). Oman Gas Company S.A.O.C.

Responsibilities:

> As an Owner's Engineer responsible for Project Engineering and Project

management to ensure all technical reviews and design engineering

compliance with applicable codes, standards, regulations, and

ordinances. Progress monitoring, overall administration of the

contract and certification of quantity & contractors invoices.

> Performs complex engineering tasks and particularly important

engineering work efficiently and accurately. Manage FEED/ Design

Contractors/ Consultant Contracts and Coordinate their activities

Interface Management with other Divisions to support design Inputs and

drawings. Review& comment on FEED contractors/ Design Consultants

submissions.

> Reviews supplier drawing submittals and performs technical bid

analyses. Prepares and issues specifications, data sheets, and other

construction documents.

> Hazardous area classification & electrical equipment selection

criteria. Design of Electrical control and protection systems for

generation, transmission and distribution systems.

> During EPC/Construction Overall management and coordination of EPC/

Construction activities

Review and approve contractor's submission for method statements and

material approval.

Technical Consultant Supervision and Conduct frequent construction

site visits for Inspection to monitor method of execution and progress

of project works. Control and monitor Project Schedule, Budget and

Performance. Review and endorse contractor's invoices for payment.

> Plan and Coordinate Quality Assurance and Quality Control activities

for the Project.

Ensure implementation of EPC contractors HSE Plan as per Company

expectation.

> During Contract Completion & Closeout agree punch-list items with

contractor.

Coordinate all corrective actions by contractors during warranty/

defects liability period.

> Make recommendation for Final Acceptance Certificate.

B. Project / Client : EPC Project for 132/ 33/11KV Distribution

Network at Al-Duqm area in

WUSTA Region / Rural Area Electricity

Company S.A.O.C (RAECO)

C. Project / Client : Annual Business Plan-2010 / Dhofar Power

Company.S.A.O.G. Salalah. (OPWP)

Project Management (PMC for EPC):

> Owner's Engineer for DPC project (OPWP) at Dhofar region Power

Transmission & Distribution, HV & LV Network system, UGC & OHL

development, upgrading and interconnecting system, SFZ area

development project.

> As an Owner's Engineer responsible for Project management,

Engineering, progress monitoring and reporting, construction

supervision, overall administration of the contract and certification

of quantity & contractors invoices.

> Review and comment / Approve Electrical project related Drawings,

Documents, Method of statements, Quality Control procedures Inspection

test plans as per project Specifications and international standards.

Material review/approval (MAS) Inspection and clearance. Contractors

billing checking as per BOQ.

> Electrical Scheme & Protection checking. Co-ordinate FEED Solution at

site.

> Minutes of meeting, weekly/monthly progress meeting, project

review/completion meeting with client and contractors.

> Responsible for monitor and follow up the entire Job from Professional

design and engineering and concept to Construction and commissioning

management of 33/11KV Substations. Erection, Installation and Testing

and commissioning of all Electrical Equipments. 2x20 MVA Main

Transformer 33KV / 11KV with OLTC operation. Station & Auxiliary

Transformer. Earthing, Small power and Lightning system.

> HV, LV Switchgear with Control and Relay panel. 110V, 48V, 30V DC

System with Battery chargers.

> Responsible for the coordination of all construction various

activities of this projects monitoring of construction progress.

Ensures that the construction effort meets all the technical and

quality assurance standards of the project and the project is built as

per approved design.

2. Employer : LARSEN & TOUBRO (QATAR)

(EPC for Energy, Oil & Gas Industry)

Project : Qatar Shell Project at Ras Laffan.

Position : Electrical Design Engineer - EPC Projects (Project

Engineering & Design)

Period : May 2009 to March 2010.

Responsibilities:

Design & Engineering Management:

> Prepare / Review all E&I project related Drawings, Documents, Method

of statements, Quality Control procedures Inspection test plans as per

project Specifications and international standards,

> Co-ordinate with Engineering Consultant for joint prepare/review of

critical E&I deliverables such as SLD, GA, Lighting & Earthing,

Instrument, Telecom, Layout, Termination drawings, specification,

Block Diagram, data sheets, loop drawings, bill of quantities,

material take off follow-up and calculate resources etc.,

> Prepare / Review Design Calculation, Relay Co-ordination settings,

Electrical Scheme & Protection checking. Cable sizing calculation and

prepare cable schedule.

> Power system electrical network studies and analysis documents

preparation using electrical design and stimulation software.

Technical support with Win PC's. Co-ordinate FEED Solution at site.

> Ensures that the construction effort meets all the technical and

quality assurance standards of the project and the project is built as

per approved design.

> Responsible for the entire Job from concept to detailed design

engineering of 33/11KV Substations with two Field Auxiliary Room

complete Installation and Testing and commissioning of all Electrical

Equipments, Instrumentation, Telecommunication, Cathodic protection,

Heat Tracing, and HVAC related E&I work.

> 20 / 10 MVA Main Transformer 39KV / 6.9KV with OLTC operation, 3.15

MVA Auxiliary Transformer 6.6KV / 0.72V, 6.6KV, 2000A, HV Switchgear

with ENMC, Annunciator & Interface Relay panel.

> 6.6KV / 690V / 415V Switchgears, Motors, Light, Socket, Lighting

Transformer, MOV, AC & DC UPS DB, Battery, Grounding, Heat tracing And

Cathodic Protection systems.

> Co-ordinate with Commissioning team for Startup, Pre-commissioning,

Commissioning Activities.

2. Employer : LARSEN & TOUBRO (OMAN) LLC,

(EPC for Power Sector, Oil & Gas Industry)

Department : Power Transmission & Distribution Sector.

Position : Electrical Design Engineer - Projects.

Period : May 2008 to May 2009.

Project / Client : TCAP - 2006 / Dhofar Power Company.S.A.O.G. Salalah

(IWPP Project).

Responsibilities:

> Responsible for front end & detailed engineering of 132/33 KV Al-Quram

Grid Substation Feeder Expansion, SF6 switchgear (Schneider & ABB) and

Control & Relay panel.

> Prepare / Review all E&I project related Drawings, Documents, Method

of statements, Quality Control procedures Inspection test plans as per

project Specifications and international standards,

> Co-ordinate with Engineering Consultant for joint prepare/review of

critical E&I deliverables such as SLD, GA, Lighting & Earthing,

Instrument, Telecom, Layout, Termination drawings, specification,

Block Diagram, data sheets, loop drawings, bill of quantities,

material take off follow-up and calculate resources etc.,

> Prepare / Review Design Calculation, Relay Co-ordination settings,

Electrical Scheme & Protection checking. Cable sizing calculation and

prepare cable schedule.

> Retrofiting of 33/11 KV Primary Substation (Awqad, Taqa, Mirbat)with

2 no's of 20 MVA OLTC & Parallel Operation.33/11 KV Switchgear front

end engineering, detailed design development.

> HV/LV Switchgears, Motors, Light, Lighting Transformer, UPS Panel,

Battery, DC system & Lightning system.

> 33 KV & 11KV over head & Under Ground Transmission & Distribution Up

gradation work Erection, Testing and Commissioning of Power cable &

OHL Network.

> Co-ordinate multidiscipline projects, Engineering and Design Review,

ITP, Method of statement including Shutdown Procedure, Test procedures

and Formats preparation.

> Manage with the clients for the review / approval of Electrical

vendor's drawings and all project related documents.

> Updating the database between the clients and vendor regarding the

status of approval code for various drawings & documents. Keeping

track with vendor during the manufacturer of various Electrical

equipments for implementing the final changes in specifications.

> As built & Marked up Drawing Review, Preparation.

3. Employer : RELINACE REFINERY (PETROCHEMICAL) CORPORATION.

Department : EPCC Project Engineering & Control

Management.

Position : Electrical Engineer.

Period : Feb 2007 to May 2008.

Project : Jamnagar Expert Refinery Project (The World

Largest Cross-root Refinery)

Design Consultant : Bechtel Corporation, USA.

Responsibilities:

> As an Owner's Engineer responsible for Project Engineering and Project

management to ensure all technical reviews and design engineering

compliance with applicable codes, standards, regulations, and

ordinances. Progress monitoring, overall administration of the

contract and certification of quantity & contractors invoices.

> Reviews supplier drawing submittals and performs technical bid

analyses. Prepares and issues specifications, data sheets, and other

construction documents.

> Responsible for detailed design engineering of 33/11KV, 11/6.6KV

Substation. 33KV, 11KV, 6.6KV Switchgear, Power Transformers 31.5MVA,

10MVA, 5MVA, 2MVA and Station & Distribution Transformers from 100 KVA

to 1000KVA and checking function through SCDA. PCC, MCC, UPS, Fire

and Gas, HVAC, Heat tracing panels, ESD panel, VSD panels, Field

Junction boxes, Lighting Circuits, Earthing, Fire & Gas.

> HT & LT Motors (6.5KW) Erection, Testing and Commissioning works. HT &

LT Cabling works.

> Offsite Pipe Rack Lighting, Earthing, Electrical & Instrument Cable

tray works. Tank Vessel & Equipment earthing, Cathodic protection

works.

> Co-ordinate with projects to provide interfaces and engineering

consultants.

> Co-ordinate with Quality department for checking, Formats, Procedure

preparation.

> Checking Design Review, drawings and quantities and ensuring that the

calculations are accurate for the work.

> Resolving any unexpected technical difficulties, and other problems

that may arise.

> As built all Electrical related drawings and documents.

4. Employer : NEYVELI LIGNITE CORPORATION, INDIA

Project : 500 MW Thermal Power Plant (TPS-II) Expansion EPCC

Project, Neyveli, India.

Position : Assistant Electrical Design Engineer - Project

Engineering & Design department.

Period : Feb 2006 to Feb 2007.

Contractor : Siemens

Responsibilities:

As an Owner's Engineer Project Management team (Assistant Electrical Design

Engineer -Project Engineering & Design department). Involved as assists by

Senior /Lead discipline responsibilities:

> 210 MW Steam (Turbo) Generators, 400 KV Substation, Switchgears,

Power Transformers from 5MVA to 250MVA, Station Transformers from

100 KVA to 2MVA, Neutral Grounding, Earthing Transformer, MCC, PMCC

control Panel, MV & LV Switchgears. Static Excitation system 340 V

DC, 2854 A (DCS 500, ABB make), HV & LV Motors (Up to 3.5 MVA),

VSD's, VFD's (ACS 500, 600 -ABB, Siemens, GE), ACDB, 110V - 250AH

Battery charger panel with DCDB, UPS, and Rectifiers works. 400KV

Open Switchyard, CT, PT, CVT, Breakers, Wave trap, Capacitor banks

vendor documents review as per requirements.

> Main contractor /Design consultant documents review based on tender

documents requirements.

> Review co-ordination of Earth mat design calculation Based on IEEE

80-2000 standard with considering different parameters.

> Review co-ordination of Cable and interconnection schedules co-

ordinate with switchgear and control & relay panel drawings.

> Check Bill of materials for Substation & Control Buildings for

Lighting & Earthing System, Bus bar Materials, Switchyard Main

Equipments and Small & Power Distribution Systems. Cable routing,

Small Power, Extra Low voltage, Earthing, Lightning Protection &

Lighting Layout for Substation & Buildings.

5. Employer : Oil & Natural Gas Corporation (ONGC - Under Annai

Industries)

Position : Graduate Electrical Engineer - Projects.

Period : Jun 2005 to Feb 2006.

> Prepare all E&I project related Drawings, Documents, Method of

statements, Quality Control procedures Inspection test plans as per

project Specifications and international standards,

> Preparation of Cable routing, Small Power, Extra Low voltage,

Earthing, Lightning Protection & Lighting Layout for Substation &

Buildings.

> Prepare SLD, GA, Instrument, Termination drawings, specification,

Block Diagram, data sheets, loop drawings, bill of quantities,

material take off follow-up and calculate resources etc.,

Personal Details:

Permanent Address : Palm court condominium,

Block-C, Level-14, Unit-03,

Jalan

Berhala, Brickfields, 50470, Kuala Lumpur, Malaysia.

14, Moari

Vaithiyar Street, Nellikuppam, Cuddalore-District,

Tamilnadu 607105,

India. Contact. No: +91-986******* (India)

Nationality : Indian.

Gender : Male.

Marital Status : Married / 1 child.

Languages Known : English, Hindi & Tamil. Arabic

(Basic)

Passport Details : F 1694676 Valid upto

39.12.2022, Place of Issue: Malaysia.

Driving License: LMV, Validity: 2022, Class: Light, Place of

Issue: Muscat, Oman / India.

Contact this candidate