Senior Instrumentation and Control Engineer
Resume:
Kexiang (Kevin) Yu
Phone: 403-***-****
Cell Phone: 587-***-****
E-mail: ************@*****.**
AREAS OF EXPERTISE
More than 20 years’ work experience of instrumentation and control systems
. Practical Experience in large projects for the oil/gas, petrochemical, chemical
and power industries
Rich experience on flow instrument & valve sizing, P&ID development,
Instrumentation specifications, instrument data sheet production, purchase
requisitions (RFQ/MR), bid evaluation (TBE).
Be proficient in piping Isometric squad check, instrumentation vendor package
check and mechanical package squad check
Involved in full life cycle of instrumentation and control system engineering
including scoping study, design basis memorandum, HAZOP, cause and effect
diagram, control narrative, detailed design, and construction support
. Practical experience with PLC/SCADA Programming and DCS configuration
Instrumentation & Control Engineering Standards - API, ISA, ASME, IEC, ISO
etc.
PROFESSIONAL EXPERIENCE
Sr. I&C SPECIALIST/ENGINEER - SNC-Lavalin Inc., Calgary, 01.2012 –
Alberta, Canada Present
MEG Energy – Christina Lake SAGD Phase 3A/2B4X Feed and Detail Project
Reviewed and updated all Instrumentation Specifications/Standards
Reviewed and updated all Instrumentation Installation Drawings
Reviewed and provided inputs for P&ID development
Reviewed and Implemented Lesson Learned/ Engineering Change Request
Worked on Control Narratives for all Process Areas
Worked on Shutdown Keys for all process Areas
Prepared and generated instrument datasheets
Provided instrument information to Other Groups
. Attended HAZOP meetings and implemented HAZOP resolutions
. Generated Instrument Material Requisition and datasheets
. Conducted Instrumentation calculation/Sizing (Control valve, Pressure Relief
Valve, Flowmeter, Thermowell and Level Range Sketch)
. Worked on technical queries and Technical Bid Evaluation (TBE)
Worked on Purchase Order for Instruments
.
. Reviewed vendor documents and piping Isometric
Page 1 of 4
. Working on Instrumentation Winterization
I&C SPECIALIST - Jacobs Canada, Calgary, Alberta, Canada 04.2011 –
12.2011
Canadian Natural Resources Limited – KIRBY SAGD Project
Worked on Technical Bid Evaluation (TBE) for instrumentation
Prepared and Generated Material Requisition for Instruments
Checked all instruments on vessels & tanks by reviewing available vendor's
mechanical drawings and provided comments to Mechanical Team
Reviewed and provided inputs for P&ID development
Reviewed Instrument 3D Model
Reviewed and marked up Vendor’s documents and drawings
Checked ISO drawings issued by Piping
Reviewed and marked up instrument calculations and datasheets from Mumbai
office
Prepared and generated instrument datasheets
Provided instrument information to Piping Group.
I&C SPECIALIST - SNC-Lavalin Inc., Calgary, Alberta, Canada 05.2007 – 03.2011
Canadian Natural Resources Limited - Horizon Oil Sand Phase 2/3 Project
Proposal
Worked on Technical Bid Evaluation (TBE) for instrumentation
Completed instrument MTOs
Checked P&IDs and Instrument Database.
Generated instrument Material requisition RFIs. for Valves (control valves, on-off
valves, pressure safety valves, regulator), Flow Meters (orifice plate, venturi,
vortex and coriolis), Level Meters (float, radar), Gas/Fire Detectors and Fire
Detection system
Saudi Aramco, Saudi Arabia - Shaybah NGL and IGHC Proposal
Completed Technical Bid Evaluation (TBE) for control valve packages, on-off
valve, ESD valve, electrical motorized valve and pressure relief valve, electronic
transmitter, instrument tubing and fitting and DCS accessories packages.
Reviewed and marked-up mechanical packages (compressors, gas hydration
etc.).
Completed instrument MTOs and instrument installation bulk material MTOs.
Provided technical queries to client.
Provided technical support to cost estimation team.
Saudi Aramco, Saudi Arabia - Wasit Gas Project
Generated and updated project instrumentation specifications ( General
Instrumentation, etc.).
Identified and Sized critical control valves.
Reviewed and provided inputs for P&ID development.
Generated instrument index and instrument specification datasheets for
Page 2 of 4
control valves, pressure relief valves, flow meters and analyzers.
Prepared and completed Gas Detection Layout
Generated instrument material requisition RFIs.
Completed Technical Bid Evaluation (TBE) for control valve, on-off valve,
ESD valve, electrical motorized valve, pressure relief valve and flow meter
packages.
Revised control narratives and cause-effect logics.
Provided technical & accessible requirements and instrument dimensions to
Piping Group.
Reviewed 3D model and provided comments.
Generated instrument MTOs.
Canadian Natural Resources Limited - Horizon Oil Sand Project
Updated instrument index and specification datasheets.
Developed as-built I&C System layout drawings.
Updated as-built FF segment & loop drawings
Petro-Canada - Fort Hills Treatment Mining Project
Generated control valve and relief valve datasheets.
Preliminary sizing control valve and pressure relief valves
Generated RFQ for pressure relief valves and control valve packages
Saudi Aramco, Saudi Arabia - Shaybah Central Processing Facilities Project
Checked and revised control valve, pressure relief valve and MOV datasheets.
Issued instrument material requisition RFQ and PO packages.
Reviewed technical bidder evaluations.
Reviewed and provided inputs for P&ID development.
Reviewed vendor’s control system documents and drawings.
Completed instrument and control system alarm/range/setting report.
Checked control system tags and updated I&C Intool index.
Conducted instrument wiring and instrument loop diagram.
Completed MCC drawings and developed instrument loop drawings.
I&C ENGINEER - B&R Automation Engineering Ltd., Shanghai, 12.1998 -
China 05.2006
Applied and selected instruments and control system.
Generated control system and instrumentation specifications.
Reviewed and provided inputs for P&ID development.
Generated instrument index and specification datasheets.
Prepared MTOs for instruments.
Developed control philosophy.
Developed control narratives and cause-effect diagrams.
Completed PLC/DCS configuration and commissioning.
Generated instrument loop, logic and installation diagrams .
I&C ENGINEER - Xi’an Instrument (Group) Co., Xian, China 09.1991 -
12.1998
Selected instruments.
Prepared MTOs for instruments.
Page 3 of 4
Generated instrument index.
Developed control philosophy.
Developed control narratives and cause-effect diagrams.
Generated I/O points for control system.
Completed PLC/DCS configuration and commissioning.
Developed instrument loop, logic and installation diagrams.
Completed FAT and SAT for control systems.
Participated in the development of the DJK-7500 DCS System
EDUCATION
M.Sc. Automation Control Engineering, Northwestern Polytechnic
University, China
B.Sc. Automation Control Engineering, Northwestern Polytechnic
University, China
TECHNICAL TRAINING
8.2014
ISA Instrumentation Series Training
10.2013
ISA INDUSTRIAL FLOW MEASUREMENT ENGINEERING
10.2012
ACM Safety Lifecycle Experience Hands on Workshop
PROFESSIONAL AFFILIATION
P Eng. Member of APEGA
Member of ISA
SKILLS
Development of various design criteria, specification and philosophies Fire & Gas System Block
Diagrams & Overall Automation System Block Diagram Participated HAZOPs and SIL verification
reviews Generated and updated control narrative and shutdown keys Sizing and calculation for inline
meters, control valve and PSV Prepare instrument index, datasheets, and material requisition Issued
RFI to solve construction questions P&ID development Create full range of engineering deliverables.
Such as wiring and loop diagram, installation detail, instrument location plan and CWP DCS
configuration, I/O card selection and assignment, and testing PLC/SCADA/HMI programming, system
configuration, network communication and testing
Page 4 of 4
Contact this candidate